Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SLP152B90 by Onsemi is a red LED array with 5 LEDs, emitting at peak wavelength of 700nm. It operates b/w -25 °C to 80°C, with max forward voltage of 2.4V and min luminous intensity of 0.0003cd. Ideal for optoelectronic applications requiring low-power consumption and precise light output control.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Problanco Electronics
Kulean Microsystems
SupplyDigital Components
Corphita
TANS Electronics
UHIMA Technologies
Corohmni
The peak wavelength of 700nm ensures a specific color output which is ideal for applications requiring red light.
With a maximum operating temperature of 80 °C, this product can be used in a wide range of environments without overheating.
The minimum operating temperature of -25 °C makes this product suitable for use in cold environments without any performance issues.
Despite its low luminous intensity of 0.0003 cd, this product is still effective in providing the required amount of light for specific applications.
The specific color output of red light is beneficial for applications where this particular color is necessary for visibility or design purposes.
The array of 5 LEDs provides a sufficient amount of light output for the intended application, ensuring adequate brightness.
With a maximum forward voltage of 2.4V, this product ensures efficient power usage while providing the necessary illumination.
Other Function Optoelectronics SLP152B90 attributes and parameters. Explore more Other Function Optoelectronics devices from Onsemi
Color At Wavelength:
Maximum Forward Voltage:
Minimum Luminous Intensity:
No. of LEDs in Array:
Maximum Operating Temperature:
Minimum Operating Temperature:
Peak Wavelength (nm):
Sub-Category:
SLP152B90 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
BAT54SLT1G
Onsemi
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317LMX/NOPB
Texas Instruments
LM317LMX/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max input-output voltage differential of 40V. It operates in temperatures ranging from -40°C to 125°C and has a max output current of 0.1A, making it suitable for various applications requiring precise voltage regulation.
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
SN65HVD230DR
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
LL4148
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Continental Device India
2N2222A
Secos
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .6 A; JEDEC-95 Code: TO-92;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
Good-ark Electronics
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
6202
Coto Technology
FET OUTPUT OPTOCOUPLER; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 85 Cel; Maximum Response Time: .002 s; Maximum On State Current: .15 A;
GP1S51
Sharp Corporation
Sharp Corporation's GP1S51 is a Transistor output optoelectronic sensor with 3mm gap size. It operates b/w -25°C to 85°C, with a fast response time of 0.000003s. Ideal for through hole mounting applications with a max on-state current of 0.0005A.
BPX85B
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 200 nA; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 80 Cel; Maximum Response Time: .000008 s;
LSL29K-G1H2-1-Z
Osram Opto Semiconductors
Osram Opto Semiconductors' LSL29K-G1H2-1-Z LED has a peak wavelength of 643nm, forward voltage of 2.2V, and max current of 0.02A. Ideal for applications requiring an orange-red light source with a water diffused lens, such as automotive lighting and signage displays.
VTB8440BH
Excelitas Technologies
Other Optoelectronics;
IL300-EF-X001
OPTOELECTRONIC DEVICE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.5 V; Maximum Isolation Voltage: 5300 V; Maximum Forward Current: .06 A;
V23845-A1121
OPTOELECTRONIC DEVICE;
HSDL-9001
Agilent Technologies
Other Optoelectronics; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel; Nominal Light Current: .000125 mA; Shape: RECTANGULAR;
5082-7650
Cml Technologies & Kg
7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; JESD-609 Code: e0; Minimum Operating Temperature: -40 Cel; Color At Wavelength: Red;
NJL6202R-1-TE1
New Japan Radio
IL300-DEFG-X006
Vishay Semiconductors
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Configuration: DUAL, SIMULTANEOUS OPERATION;
SFH9305
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Gap Size: 3.28 mm; Output Circuit Type: Transistor; Maximum On State Current: .05 A; Maximum Operating Temperature: 85 Cel;
PVI5013RSPBF
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Configuration: SEPARATE, 2 ELEMENTS; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3;
SPI212
SPI212 by Onsemi is a Transistor with 20V Max On State Voltage, 0.00003s Max Response Time, and -25 to 85 °C Operating Temp. Ideal for optoelectronic applications requiring THROUGH HOLE MOUNT with 3mm Gap Size.
4N25
Renesas Electronics
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 1.5 V; Maximum Forward Current: .06 A; Minimum Current Transfer Ratio: 20 %;
HEDL-5640#A13
OPTOELECTRONIC DEVICE; No. of Functions: 1; Maximum Operating Temperature: 70 Cel; Configuration: SINGLE, 3 CHANNELS; Minimum Operating Temperature: 0 Cel;
V23845-B4512
SFH619A-X007T
Vishay Intertechnology
Vishay Intertechnology SFH619A-X007T is a surface mount optoelectronic component with 0.06A forward current, -55 to 100°C operating temperature range, and 5300V isolation voltage. Ideal for applications requiring high current transfer ratio of 1000%, such as in power control systems or industrial automation equipment.
IL300-EF
Siemens
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Elements: 1; Maximum Power Dissipation: .05 W;
PSD302-12LM
Other Optoelectronics; Terminal Finish: TIN LEAD; JESD-609 Code: e0;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SLP141B51
Other Optoelectronics; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Height: 8.2 mm;
SLP154B51
Other Optoelectronics; Lens Type: DIFFUSED; Height: 9.3 mm; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Peak Wavelength (nm): 700;
SLP156B51
Other Optoelectronics; Lens Type: DIFFUSED; Maximum Forward Voltage: 2.4 V; Peak Wavelength (nm): 700; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red;
SLP166B90
Other Optoelectronics; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Minimum Luminous Intensity: .00025 cd; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SLP167B90
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .00011 cd; No. of LEDs in Array: 5; Peak Wavelength (nm): 700; Color At Wavelength: Red;
SLP169B90
Other Optoelectronics; No. of LEDs in Array: 5; Peak Wavelength (nm): 700; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .0003 cd;
SLP171E51
Other Optoelectronics; Peak Wavelength (nm): 700; Minimum Operating Temperature: -25 Cel; Minimum Luminous Intensity: .0006 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 2;
SLP172B90
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Color At Wavelength: Red; No. of LEDs in Array: 5; Maximum Forward Voltage: 2.4 V; Minimum Operating Temperature: -25 Cel;
SLP182C51
Other Optoelectronics; Lens Type: WATER CLEAR; Peak Wavelength (nm): 700; Color At Wavelength: Red; Minimum Operating Temperature: -25 Cel; Height: 6 mm;
SLP152B90
Sanyo Electric
Other Optoelectronics; Peak Wavelength (nm): 700; Minimum Luminous Intensity: .0003 cd; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; No. of LEDs in Array: 5;
Other Optoelectronics; Maximum Operating Temperature: 80 Cel; Color At Wavelength: Red; Minimum Luminous Intensity: .00025 cd; Minimum Operating Temperature: -25 Cel; Maximum Forward Voltage: 2.4 V;
Other Optoelectronics; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel; Peak Wavelength (nm): 700; Minimum Luminous Intensity: .00011 cd; Color At Wavelength: Red;
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -25 Cel;
Other Optoelectronics; Maximum Forward Voltage: 2.4 V; Minimum Luminous Intensity: .0006 cd; Minimum Operating Temperature: -25 Cel; Color At Wavelength: Red; Maximum Operating Temperature: 80 Cel;
Other Optoelectronics; Minimum Luminous Intensity: .0003 cd; Maximum Forward Voltage: 2.4 V; No. of LEDs in Array: 5; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 80 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved