Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
IL300-E-X009T by Vishay Intertechnology is a Photodiode Output Optocoupler with 0.06A max forward current, 5300V isolation voltage, and -55 to 100°C operating temperature range. Ideal for surface mount applications in various electronic circuits requiring high isolation and reliable signal transmission.
Median Price
$10.490
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$6.640
1k+ parts
$5.420
10k+ parts
-
Nova Conductors
$5.243
Vyrian
Aztec Data Supply Inc.
$0.056
Corohmni
$0.787
AZTECH Wire
$1.200
$1.150
$1.130
$1.110
Continental Prestige Electronics
$5.138
Netroflash
Ampacity Inc.
$9.180
QUARKTWIN TECHNOLOGY LTD
iodParts Technologies Inc.
Argo Parts USA
Allows for efficient and safe operation within specified current limits.
Utilizes a photodiode output optocoupler for reliable signal transmission.
Can withstand high temperatures, ensuring stable performance in various environments.
Capable of functioning in low temperature conditions without any issues.
Matte tin terminal finish provides good solderability and conductivity.
Efficient power dissipation to prevent overheating and ensure product longevity.
High isolation voltage for safe operation and protection against electrical hazards.
Surface mount design for easy and secure installation in various applications.
Low forward voltage drop for energy efficiency and lower power consumption.
Other Function Optoelectronics IL300-E-X009T attributes and parameters. Explore more Other Function Optoelectronics devices from Vishay Intertechnology
Maximum Forward Current:
Maximum Forward Voltage:
Maximum Isolation Voltage:
JESD-609 Code:
Mounting Feature:
No. of Elements:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Maximum Power Dissipation:
Sub-Category:
Terminal Finish:
IL300-E-X009T Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.80.00
SB
PCN Design/Specification - IL300 12/Jun/2017 IL300 22/Apr/2021
Vishay Intertechnology, Inc. is a renowned American manufacturer of discrete semiconductors and passive electronic components that have been used in many consumer products and industrial applications worldwide. Founded by Polish-born businessman Felix Zandman in 1962, Vishay has grown to become one of the world's largest manufacturers of these components, with a strong presence in every major market around the globe. The company also offers value-added solutions such as its patented passive components, replacing a number of legacy parts with more reliable, cost effective solutions.
Executive Chairman of the Board, Chief Business Development Officer
Marc Zandman
Chief Executive Officer, President, and Director
Joel Smejkal
Executive Vice President and Chief Financial Officer
Lori Lipcaman
Itzehoe - Fab Phase 1
Fabrication
Fab Initiation
2025
Germany
Itzehoe
Wafer Capacity
US - Fab 3
1986
USA
Santa Clara
24,500
US - Fab 2
1972
8,000
Austria
1984
Vöcklabruck
25,000
Taiwan
1967
Hsintien
12,000
Italy - Fab 8
1961
Canada
Torino
15,000
Israel
2000
Yokneam Illit
400
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
2N2222A
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
LM317T/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
NC7WZ07P6X
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
General Semiconductor
BAV99
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
DRV5053VAQLPG
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
IL300-F-X009T
Vishay Intertechnology
Vishay Intertechnology's IL300-F-X009T is a dual optocoupler with photodiode output. It operates at temperatures from -55°C to 100°C and has an isolation voltage of 5300V. Ideal for surface mount applications, it has a max forward current of 0.06A and forward voltage of 1.5V.
NSL-5152
Silonex
OPTOELECTRONIC DEVICE; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0;
NSL-4960
LCM-S01602DSR/D
Lumex
The Lumex LCM-S01602DSR/D is a 16x2 STN display with LED backlight. Operating temperature range: 0-50°C. Suitable for applications requiring a reflective polarization mode and a viewing area of 99mm x 24mm.
TLP181(GB,F)
Toshiba
Toshiba's TLP181(GB,F) optoelectronic device has a max forward current of 0.02A, collector-emitter breakdown voltage of 80V, and isolation voltage of 3750V. Ideal for applications requiring high electrical isolation and signal transfer in temperature range -25 to 85°C.
ELM55503RD
Bivar
ELM55503RD by Bivar is a red diffused LED with a max forward current of 0.02 A and peak wavelength of 700 nm. It operates at temperatures ranging from -25 to 85 °C and has a viewing angle of 35°. It is commonly used in applications requiring red light emission, such as signage or indicator lights.
H21B6
Intersil
Other Optoelectronics; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -55 Cel; Output Circuit Type: Darlington; Maximum Response Time: .000045 s;
SFH3505FA1
Other Optoelectronics; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum On State Current: .05 A; Peak Wavelength (nm): 860;
TC242-20
Other Optoelectronics;
SD3421-002
Micro Switch
PIN PHOTODIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Dark Current: 20 nA; Semiconductor Material: Silicon; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 125 Cel;
TC242-80
PVI1050NPBF
International Rectifier
OPTOELECTRONIC DEVICE; Terminal Finish: MATTE TIN; JESD-609 Code: e3; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
IL300-EF
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Voltage: 1.5 V; Maximum Isolation Voltage: 5300 V; Maximum Power Dissipation: .05 W;
LCM-S01602DSF/B
The Lumex LCM-S01602DSF/B is a 2-row display with 16 characters per row, measuring 84mm x 44mm x 12.7mm. It operates b/w 0°C to 50°C, making it suitable for various applications requiring a compact and reliable optoelectronic solution.
IL300-EF-X017
Vishay Intertechnology IL300-EF-X017 is a dual optoelectronic device with simultaneous operation. It has a max forward current of 0.06A and isolation voltage of 5300V, suitable for surface mount applications in temperatures ranging from -55°C to 100°C.
SL1189-20
Onsemi
SL1189-20 by Onsemi is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm. It has common anode configuration, red color at wavelength, and 8mm display height. With max forward voltage of 2.4V, it operates b/w -25 °C to 70°C, suitable for various optoelectronic applications.
SPI206
SPI206 by Onsemi is a Transistor with 20V Max On State Voltage, 0.00003s Max Response Time, and -25 to 85 °C Operating Temp. Ideal for optoelectronic applications, it features Through Hole Mounting and a 3mm Gap Size for precise circuit control.
SM0805UOC
SM0805UOC by Bivar is a WATER CLEAR LED with 1.4mm size, emitting ULTRA ORANGE light at 625nm wavelength. It has a max forward current of 0.03A and operates b/w -20°C to 80°C. Ideal for surface mount applications requiring a viewing angle of 140° and nominal luminous intensity of 75.0mcd.
HEDL-5540#A11
Agilent Technologies
OPTOELECTRONIC DEVICE; Configuration: SINGLE, 3 CHANNELS; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; No. of Functions: 1;
ASMT-BB20-NS000
Broadcom
ASMT-BB20-NS000 by Broadcom is a blue LED with peak wavelength of 470nm, max forward current of 0.02A, and transparent lens type. Ideal for applications requiring low power consumption and precise blue light emission in environments ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
IL300-F-X007
IL300-F-X007 by Vishay Intertechnology is a dual optoelectronic device with simultaneous operation. It has a max forward current of 0.06A and isolation voltage of 5300V, suitable for surface mount applications in temperatures ranging from -55°C to 100°C.
IL300-F
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Power Dissipation: .05 W; No. of Elements: 1; No. of Functions: 1;
Siemens
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 100 Cel; No. of Functions: 1; No. of Elements: 1;
Vishay Intertechnology's IL300-F is a dual optocoupler with max. forward current of 0.06A and isolation voltage of 5300V. Ideal for applications requiring photodiode output, it operates b/w -55°C to 100°C, making it suitable for diverse electronic systems.
Vishay Semiconductors
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; JESD-609 Code: e3; Configuration: DUAL, SIMULTANEOUS OPERATION; Maximum Operating Temperature: 100 Cel;
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Elements: 1; Maximum Power Dissipation: .05 W;
IL300-EF by Vishay Intertechnology is a dual optocoupler with photodiode output. It operates at temperatures from -55°C to 100°C and has an isolation voltage of 5300V. Ideal for applications requiring simultaneous operation and a max forward current of 0.06A.
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3; Configuration: DUAL, SIMULTANEOUS OPERATION;
IL300-EF-X016
Vishay Intertechnology IL300-EF-X016 is a dual optocoupler with max. forward current of 0.06A and isolation voltage of 5300V. Ideal for applications requiring simultaneous operation, it has a wide temp range from -55°C to 100°C, making it suitable for various industrial environments.
IL300-DEFG
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -55 Cel; JESD-609 Code: e3; Configuration: DUAL, SIMULTANEOUS OPERATION; Maximum Operating Temperature: 100 Cel;
Vishay Intertechnology's IL300-DEFG is a dual optocoupler with photodiode output. It operates at temperatures from -55°C to 100°C and has an isolation voltage of 5300V. Ideal for through-hole mounting, it can handle a max forward current of 0.06A, making it suitable for various optoelectronic applications.
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .06 A; Configuration: DUAL, SIMULTANEOUS OPERATION; Maximum Power Dissipation: .05 W;
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; Maximum Forward Current: .06 A; Maximum Forward Voltage: 1.5 V;
IL300-F-X017T
Vishay Intertechnology IL300-F-X017T is a dual optocoupler with 0.06A forward current, 5300V isolation voltage, and -55 to 100°C operating temperature range. Ideal for surface mount applications in various electronic devices requiring simultaneous operation of photodiode output optoelectronics.
IL300-DEFG-X007
OPTOELECTRONIC DEVICE; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 5300 V; JESD-609 Code: e3; No. of Functions: 1;
IL300-E
OPTOELECTRONIC DEVICE; Terminal Finish: Matte Tin (Sn); JESD-609 Code: e3; No. of Functions: 1; Maximum Operating Temperature: 100 Cel; Configuration: DUAL, SIMULTANEOUS OPERATION;
Photodiode Output Optocoupler; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Matte Tin (Sn); Configuration: DUAL, SIMULTANEOUS OPERATION; Minimum Operating Temperature: -55 Cel; Maximum Operating Temperature: 100 Cel;
Vishay Intertechnology's IL300-E is a dual optocoupler with max. forward current of 0.06A and isolation voltage of 5300V. Ideal for applications requiring simultaneous operation, it has a temp range from -55°C to 100°C. With matte tin finish and through-hole mount, it offers reliable performance in various electronic systems.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved