Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SDL6032-001 by Onsemi is an 830nm LASER DIODE with GaAlAs material. It operates b/w -10 °C to 50°C, featuring THROUGH HOLE MOUNT. Ideal for applications requiring precise optical emission in a wide temperature range.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Problanco Electronics
Corphita
SupplyDigital Components
UHIMA Technologies
TANS Electronics
Corohmni
Kulean Microsystems
The peak wavelength of 830nm makes this laser diode suitable for applications such as optical communications, spectroscopy, and medical equipment.
Being a laser diode, this product provides a coherent and focused beam of light, making it ideal for tasks such as laser cutting, laser printing, and laser pointers.
With a maximum operating temperature of 50 °C, this laser diode can work efficiently without overheating in a variety of environments, ensuring reliability and longevity.
The wide temperature range of -10 °C to 50°C allows this laser diode to function effectively in both hot and cold conditions, making it versatile for different applications.
The use of GaAlAs semiconductor material in this laser diode offers high efficiency and power output, making it a reliable and durable choice for demanding tasks.
The through hole mounting feature simplifies the installation process of this laser diode, providing a secure and stable attachment in various electronic devices or systems.
Laser Diodes SDL6032-001 attributes and parameters. Explore more Laser Diodes devices from Onsemi
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Semiconductor Material:
Sub-Category:
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
1N4148
Leshan Radio
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
LL4148
Surge Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
Multicomp Pro
Panjit International
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Unitrode
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
NX8570SC683D-BA-AZ
Renesas Electronics
LASER DIODE; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: -5 Cel; Maximum Forward Voltage: 2.5 V; Maximum Forward Current: .3 A; Peak Wavelength (nm): 1568;
TOLD132
Toshiba
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 830; Maximum Forward Current: .105 A;
SDL3030-001
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 790; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 65 Cel;
NX8571SC501-BA
LASER DIODE; Peak Wavelength (nm): 1550; Maximum Forward Voltage: 2.5 V; Minimum Operating Temperature: -5 Cel; Semiconductor Material: InGaAsP; Maximum Forward Current: .3 A;
NX8562LF671-BA-A
LASER DIODE; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 70 Cel; Maximum Forward Current: .3 A; Peak Wavelength (nm): 1567;
NX8570SC358-BA-AZ
LASER DIODE; Semiconductor Material: InGaAsP; Peak Wavelength (nm): 1535; Maximum Operating Temperature: 70 Cel; Maximum Forward Voltage: 2.5 V; Maximum Forward Current: .3 A;
NX5521EH
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Peak Wavelength (nm): 1550; Maximum Forward Current: .15 A; Maximum Response Time: .0000000007 s;
NX8563LAS517-CD-A
LASER DIODE; Maximum Forward Voltage: 2 V; Maximum Response Time: .00000000012 s; Maximum Operating Temperature: 85 Cel; Semiconductor Material: InGaAsP; Peak Wavelength (nm): 1552;
CQF23/D13
NXP Semiconductors
CQF23/D13 by NXP Semiconductors is a high-performance laser diode with a peak wavelength of 790 nm and a max forward current of 0.07 A. It operates b/w -10 °C to 60 °C, making it ideal for various optoelectronic applications. With an ultra-fast response time of 0.5 ns, it's perfect for precision tasks.
SDL5030-001
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 790; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 50 Cel;
NX8560LJ549-BC
LASER DIODE; Maximum Response Time: .00000000004 s; Maximum Forward Current: .15 A; Semiconductor Material: GaAs; Maximum Forward Voltage: 2 V; Maximum Operating Temperature: 70 Cel;
DL-LS40
DL-LS40 by Onsemi is an 800nm LASER DIODE with AlGaInP material. It operates b/w -10 °C to 50°C, suitable for THROUGH HOLE MOUNT applications in optoelectronics.
SDL7033-201
SDL7033-201 by Onsemi is an 875nm LASER DIODE with GaAlAs material. It operates b/w -10 °C to 50°C, suitable for THROUGH HOLE MOUNT applications in optoelectronics.
54-00152
Viavi Solutions
Viavi Solutions' 54-00152 Laser Diode operates at peak wavelength of 810nm with spectral bandwidth of 3m. It can withstand temperatures from -20°C to 50°C, featuring through hole mounting. Ideal for applications requiring precise laser emission in optoelectronics and telecommunications.
NX8562LB589-BA
LASER DIODE; Mounting Feature: SURFACE MOUNT; Peak Wavelength (nm): 1559; Maximum Operating Temperature: 65 Cel; Maximum Forward Current: .3 A; Maximum Forward Voltage: 1.5 V;
DL-5147-041
DL-5147-041 by Onsemi is a LASER DIODE with Peak Wavelength of 655nm, Max Forward Current of 0.11A, and Max Forward Voltage of 2.8V. It operates b/w -10 °C to 60°C, suitable for THROUGH HOLE MOUNT applications in various industries.
HL1323TR
LASER DIODE; Peak Wavelength (nm): 1310; Maximum Threshold Current: 50 mA; Maximum Operating Temperature: 60 Cel; Nominal Output Power: .3 W; No. of Functions: 1;
NX8563LF6091-BA-AZ
LASER DIODE; Maximum Operating Temperature: 70 Cel; Maximum Forward Current: .3 A; Minimum Operating Temperature: -20 Cel; Peak Wavelength (nm): 1609; Maximum Forward Voltage: 2.5 V;
SDL3140-101
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 65 Cel; Peak Wavelength (nm): 790; Minimum Operating Temperature: -10 Cel;
TOLD321CAC
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 1310; Minimum Operating Temperature: 0 Cel; Maximum Operating Temperature: 65 Cel; Semiconductor Material: InGaAs;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SDL6030-001
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Semiconductor Material: GaAlAs; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 790;
SDL6030-011
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 790; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel;
SDL6030-101
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Semiconductor Material: GaAlAs; Peak Wavelength (nm): 790; Maximum Operating Temperature: 50 Cel;
SDL6030-111
SDL6030-201
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Semiconductor Material: GaAlAs; Peak Wavelength (nm): 800; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 50 Cel;
SDL6030-211
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 790;
SDL6032
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 830; JESD-609 Code: e0; Semiconductor Material: GaAlAs;
SDL6032-011
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 830;
SDL6032-101
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 830; Maximum Operating Temperature: 50 Cel;
SDL6032-111
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 50 Cel; Peak Wavelength (nm): 830; Minimum Operating Temperature: -10 Cel;
SDL6032-201
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Semiconductor Material: GaAlAs; Peak Wavelength (nm): 830; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel;
SDL6032-211
SDL6033-001
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 875; Semiconductor Material: GaAlAs; Minimum Operating Temperature: -10 Cel; Maximum Operating Temperature: 50 Cel;
SDL6033-101
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 875; Maximum Operating Temperature: 50 Cel; Semiconductor Material: GaAlAs;
SDL6033-201
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 875; Semiconductor Material: GaAlAs; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel;
Sanyo Electric
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel; Peak Wavelength (nm): 830;
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Peak Wavelength (nm): 830; Maximum Operating Temperature: 50 Cel; Minimum Operating Temperature: -10 Cel;
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Peak Wavelength (nm): 830; Semiconductor Material: GaAlAs;
SDL6032-001
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Semiconductor Material: GaAlAs; Peak Wavelength (nm): 830; JESD-609 Code: e0;
LASER DIODE; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 50 Cel; JESD-609 Code: e0; Minimum Operating Temperature: -10 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved