Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Power Field-Effect Transistors;
Median Price
$7.764
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Arrow
1+ parts
$4.124
100+ parts
$4.022
1k+ parts
$3.920
10k+ parts
-
Chip1Stop
$7.098
$4.947
$3.827
Mouser Electronics
$8.430
$4.450
$4.240
$4.110
Newark
$8.500
$4.530
$4.390
DigiKey
$8.870
$4.441
$4.396
$3.592
Element14
$10.680
$6.860
$6.250
Verical
Farnell
$4.080
$4.000
Digiode
$6.365
Vyrian
Flip Electronics
NAC Semi
$5.540
IBS Electronics
$5.273
Corohmni
$4.710
Corphita
$6.030
TANS Electronics
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
UHIMA Technologies
NTBL075N065SC1 Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
1552200168
Molex
WIRE AND CABLE;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
M39029/58-360
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
NC7WZ17P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
IRLML2244TRPBF
Infineon Technologies
IRLML2244TRPBF by Infineon Technologies is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 18A Max IDM, and 0.054 ohm Max RDS(on). With a small outline package style and matte tin terminal finish, it operates b/w -55 to 150 °C, making it ideal for various power management needs.
NDT456P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Maximum Drain Current (ID): 7.5 A; No. of Elements: 1;
RFD14N05LSM9A
Harris Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-252AA; Qualification: Not Qualified; Maximum Turn Off Time (toff): 100 ns;
IRF530PBF-BE3
Vishay Intertechnology
BSC123N08NS3GATMA1
BSC123N08NS3GATMA1 by Infineon is a N-CHANNEL FET with 80V DS breakdown voltage and 220A pulsed drain current. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 66W. This MOSFET has a drain-source on resistance of 0.0123 ohm and can handle up to 150°C operating temperature.
IRLML6402PBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Maximum Drain Current (Abs) (ID): 3.7 A; JESD-30 Code: R-PDSO-G3;
IRLML5203TRPBF
Infineon's IRLML5203TRPBF is a P-CHANNEL FET for SWITCHING applications. Features include 30V DS Breakdown Voltage, 24A IDM, and 0.098 ohm RDS(on). With a small outline package style and -55 to 150 °C operating range, it's ideal for power management in various electronic devices.
BSZ097N04LSGATMA1
Infineon BSZ097N04LSGATMA1 is a N-CHANNEL FET with 40V DS breakdown voltage, ideal for SWITCHING applications. Features include 160A IDM, 0.0142 ohm RDS(on), and 20mJ EAS rating. Operates in ENHANCEMENT MODE up to 175°C, with PLASTIC/EPOXY package and DUAL terminal position.
FQD7P20TM
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 55 W; Peak Reflow Temperature (C): 260; Transistor Application: SWITCHING;
AUIRFZ44N
AUIRFZ44N by Infineon Technologies is a power FET with N-channel polarity. It has a min DS breakdown voltage of 55V and can handle a max pulsed drain current of 160A. This transistor is commonly used for switching applications.
IRF7341TRPBF
Infineon's IRF7341TRPBF is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 42A IDM, 140mJ EAS, and 0.05 ohm RDS(on). With a max power dissipation of 2W and operating temperature up to 150°C, it suits various high-power electronic designs.
JANTX2N6796U
Defense Logistics Agency
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-CQCC-N15; Maximum Pulsed Drain Current (IDM): 32 A; Operating Mode: ENHANCEMENT MODE;
SIR873DP-T1-GE3
Vishay Intertechnology's SIR873DP-T1-GE3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 50A and EAS of 80mJ, this MOSFET has 0.0475 ohm Drain-Source On Resistance. Its small outline package and matte tin finish make it suitable for various electronic designs.
FDB3632
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 310 W; Transistor Element Material: SILICON; Maximum Time At Peak Reflow Temperature (s): 30;
FDD6685
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 52 W; Qualification: Not Qualified; JESD-30 Code: R-PSSO-G2;
IRF540PBF
Vishay Intertechnology's IRF540PBF is a N-CHANNEL FET with 100V DS Breakdown Voltage, ideal for SWITCHING applications. It features 110A IDM, 230mJ EAS, and 0.077 ohm RDS(ON). Operating in ENHANCEMENT MODE, it has a max power dissipation of 150W and can withstand temperatures up to 175°C.
FDMC86102LZ
FDMC86102LZ by Onsemi is a N-CHANNEL Power FET with 100V DS Breakdown Voltage and 30A IDM. Ideal for SWITCHING applications, it features a built-in diode, 0.024 ohm RDS(on), and 41W Pdiss. Suitable for surface mount designs in various electronic systems requiring high power efficiency and reliability.
IRF7103TRPBF
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Additional Features: LOGIC LEVEL COMPATIBLE;
G3R75MT12K
Genesic Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTBLS4D0N15MC
NTBLS4D0N15MC by Onsemi is a N-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. It features 2255A IDM, 332mJ EAS, and 0.0044 ohm Drain-Source Resistance. Operating from -55 to 175 °C, it's a high-power transistor in SMALL OUTLINE package suitable for various industrial uses.
NTBLS1D1N08H
NTBLS1D1N08H by Onsemi is a N-CHANNEL Power FET with 80V DS Breakdown Voltage. It features a max IDM of 900A and EAS of 1580mJ, suitable for high-power applications. With an operating temperature range from -55 to 175°C, it is ideal for power management in various electronic devices.
NTBLS0D7N06C
NTBLS0D7N06C by Onsemi is a N-CHANNEL Power FET with 60V DS Breakdown Voltage, 900A IDM, and 0.00075 ohm RDS(on). Ideal for power management applications due to its high current handling capacity and low on-resistance. Suitable for use in enhancement mode operation at temperatures ranging from -55°C to 175°C.
NTBL045N065SC1
NTBL082N65S3HF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 313 W; Terminal Form: FLAT; Moisture Sensitivity Level (MSL): 1;
NTBL080N60S5H
NTBLS1D5N10MC
NTBLS1D5N10MCTXG
NTBL048N60S5H
NTBL061N60S5H
NTBL100N60S5H
NTBL125N60S5H
NTBL070N65S3
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 312 W; Minimum Operating Temperature: -55 Cel; Package Shape: RECTANGULAR;
NTBL150N60S5H
NTBLS1D5N08MC
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 250 W; Maximum Time At Peak Reflow Temperature (s): 30; JESD-30 Code: R-PSSO-F2;
NTBL060N065SC1
NTBL095N65S3H
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 208 W; Package Shape: RECTANGULAR; Maximum Operating Temperature: 150 Cel;
NTBLS001N06C
The Onsemi NTBLS001N06C is a N-CHANNEL Power FET with 60V DS Breakdown Voltage, 900A IDM, and 0.0009 ohm RDS(on). Ideal for power applications requiring high drain current handling and low on-resistance. Suitable for use in enhancement mode operation at temperatures ranging from -55 to 175 °C.
NTBL050N65S3H
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 305 W; Package Shape: RECTANGULAR; Terminal Form: FLAT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved