Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NP1500GARLG by Onsemi is a single silicon surge protector with 140V DC off-state voltage and 180V breakdown voltage. It features a thyristor surge protector configuration, suitable for applications requiring isolated case connection and UL recognized standards compliance.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Kulean Microsystems
SupplyDigital Components
Problanco Electronics
Corphita
TANS Electronics
UHIMA Technologies
Corohmni
Plastic/Epoxy material provides durability and protection against external elements, making this surge protector suitable for a variety of environments.
Single configuration simplifies installation and setup process, making it easy to use for consumers.
Round shape allows for easy mounting and integration into different systems or devices.
Wire terminals provide a reliable connection, ensuring efficient operation and performance.
Two terminals offer a simple and straightforward connection setup for users.
Long form package style provides versatility and adaptability for various applications and installations.
High DC off-state voltage rating ensures effective protection against surges and spikes, safeguarding connected equipment.
Thyristor surge protector is a reliable and efficient device for suppressing and diverting surge currents, enhancing the overall performance of the surge protector.
Axial terminal position allows for easy and secure mounting, ensuring stability and durability in operation.
Isolated case connection prevents interference and ensures safety, making it ideal for sensitive electronic devices.
High maximum holding current capability ensures robust protection and reliable performance during surge events.
High maximum breakdown voltage rating provides effective protection and reliability under varying voltage conditions.
UL recognized standard ensures compliance with industry regulations and standards, guaranteeing the quality and safety of the surge protector.
Silicon Surge Protectors NP1500GARLG attributes and parameters. Explore more Silicon Surge Protectors devices from Onsemi
Maximum Breakdown Voltage:
Case Connection:
Configuration:
Maximum DC Off-state Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
No. of Elements:
No. of Terminals:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Reference Standard:
Sub-Category:
Surface Mount:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Trigger Device Type:
NP1500GARLG Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
USB3320C-EZK-TR
Microchip Technology
Microchip Technology's USB3320C-EZK-TR is a Bus Controller IC with 32 terminals, operating at 1.6-2V. It supports USB bus compatibility, clock frequency up to 60MHz, and CMOS technology. Ideal for applications requiring Universal Serial Bus peripherals in compact designs with low power consumption.
Vishay Telefunken
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
Alpha & Omega Semiconductor
Hy Electronic
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
TISP3350H3SL
Texas Instruments
TISP3350H3SL by Texas Instruments is a Silicon Surge Protector with 60A peak current, 275V off-state voltage, and 350V breakdown voltage. It is used for surge protection in various applications due to its thyristor trigger device type and series-connected configuration.
TISP3072F3P
TISP3072F3P by Texas Instruments is a silicon surge protector with 6A peak current, 72V breakdown voltage, and UL recognition. It features series connection, center tap configuration, and 2 elements for protection against surges in electronic circuits. Ideal for safeguarding sensitive equipment from voltage spikes in various applications.
MMT08B064T3
The Onsemi MMT08B064T3 is a single silicon surge protector with a non-repetitive peak on-state current of 32A. It operates b/w -40 °C to 125°C, featuring a max DC off-state voltage of 58V. Ideal for applications requiring protection against surges, it is UL recognized and surface mountable.
TISP61060P
TISP61060P by Texas Instruments is a silicon surge protector with 6A non-repetitive peak on-state current and 100V max DC off-state voltage. It features a complex configuration, dual terminal position, and thyristor surge protector trigger device type. Ideal for protecting electronic devices from voltage surges in various applications.
TISP4250H3BJ
TISP4250H3BJ by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak current. It features a max breakdown voltage of 250V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
ETP01-2821
STMicroelectronics ETP01-2821 is a Silicon Surge Protector with 3 elements, 8 terminals, and max breakdown voltage of 36V. It has a complex configuration, Gull Wing terminal form, and operates b/w -40 °C to 150°C. Ideal for surge protection in various electronic applications.
P3100SB
Littelfuse
The Littelfuse P3100SB is a single silicon surge protector with a non-repetitive peak on-state current of 30A. It features a min breakdown voltage of 275V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges, it is UL recognized and designed for surface mount applications.
TISP4350H3LM
TISP4350H3LM by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 60A. It operates b/w -40°C to 150°C, offering protection with a max breakdown voltage of 350V. Ideal for applications requiring reliable overvoltage protection in electronic circuits.
TLP270G
TLP270G by STMicroelectronics is a silicon surge protector designed for robust applications. It features a max breakdown voltage of 400V, non-repetitive peak on-state current of 31A, and comes in a compact surface mount package. Ideal for protecting sensitive electronics from voltage spikes.
TISP4165M3LMFR
TISP4165M3LMFR by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, featuring a breakdown voltage of 165V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
TISP1082L
TISP1082L by Texas Instruments is a Silicon Surge Protector with 10A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 82V Max Breakdown Voltage. Ideal for protecting electronic devices from voltage surges in various applications.
MMT10B230T3
The Onsemi MMT10B230T3 is a silicon surge protector with a max DC off-state voltage of 170V and trigger device type as thyristor. It operates b/w -40 to 175 °C, making it suitable for applications requiring protection against voltage surges in electronic circuits.
TISP4095M3LP
TISP4095M3LP by Texas Instruments is a single thyristor surge protector with 30A non-repetitive peak on-state current and 95V max breakdown voltage. It features a plastic/epoxy package body, wire terminals, and cylindrical package style. Ideal for protecting electronic devices from voltage surges in various applications.
TISP7072F3SL
TISP7072F3SL by Texas Instruments is a 3-element surge protector with 5A peak current and 72V breakdown voltage. It features a thyristor trigger device, suitable for protecting against surges in electronic circuits. The package is rectangular with through-hole terminals, ideal for inline applications requiring UL recognized standards compliance.
NP1800SCT3G
NP1800SCT3G by Onsemi is a single silicon surge protector with 2 terminals, max breakdown voltage of 220V, and trigger device type as thyristor. It has a small outline package shape and is surface mountable. Ideal for protecting electronic devices from power surges in various applications.
TISP4250M3LM
TISP4250M3LM by Texas Instruments is a single silicon surge protector with 32A peak current. It operates b/w -40°C to 150°C, has 2 terminals, and a breakdown voltage of 250V. Ideal for UL-recognized applications requiring thyristor surge protection in plastic/epoxy packages.
TISP4160LP
TISP4160LP by Texas Instruments is a single silicon surge protector with a non-repetitive peak on-state current of 2.5A. It has a max breakdown voltage of 160V and operates b/w 0-70°C. Ideal for protecting electronic circuits from voltage surges in various applications.
TISP4145H3LPR
TISP4145H3LPR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current and 145V max breakdown voltage. It features a cylindrical package style, wire terminal form, and is ideal for protecting electronic devices from power surges in various applications.
TISP4395H3BJR
TISP4395H3BJR by Texas Instruments is a single silicon surge protector with 60A non-repetitive peak on-state current. It has a max breakdown voltage of 395V and operates b/w -40°C to 150°C. Ideal for protecting electronic devices from power surges in various applications.
TISP3250H3SL
TISP3250H3SL by Texas Instruments is a Silicon Surge Protector with 60A Non Repetitive Peak On-state Current. It features SERIES CONNECTED, CENTER TAP configuration and 190V Max DC Off-state Voltage. Ideal for protecting electronic devices from voltage surges in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NP1500GBRLG
THYRISTOR SURGE PROTECTOR; Package Style (Meter): LONG FORM; Surface Mount: NO; Terminal Position: AXIAL; Configuration: SINGLE; Case Connection: ISOLATED;
NP1500SAMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; JESD-609 Code: e3;
NP1500SAT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum Holding Current: 150 mA;
NP1500SBMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Maximum DC Off-state Voltage: 140 V;
NP1500SBT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; No. of Elements: 1;
NP1500SCMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Terminal Form: C BEND;
NP1500SCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Reference Standard: UL RECOGNIZED;
NP1500SDMCT3G
THYRISTOR SURGE PROTECTOR; Package Style (Meter): SMALL OUTLINE; Surface Mount: YES; Terminal Position: DUAL; Configuration: SINGLE; Package Shape: RECTANGULAR;
NP1500SET3G
THYRISTOR SURGE PROTECTOR; Surface Mount: YES; Maximum Holding Current: 150 mA; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -40 Cel; Maximum Breakdown Voltage: 180 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved