Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5104DR2G by Onsemi is a half bridge peripheral driver with 15V power supplies, under voltage protection, and 20V max supply voltage. It is ideal for automotive applications due to its small outline package style and wide temperature range (-40 to 125°C). The driver offers fast turn-on time of 0.8 us and turn-off time of 0.17 us for efficient source and sink current flow control.
Median Price
$0.676
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Element14
1+ parts
$1.030
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$1.160
$0.669
$0.588
DigiKey
Newark
$0.670
$0.581
Arrow
$0.478
Chip1Stop
$0.519
Rochester
$0.652
$0.541
$0.482
Verical
$0.603
EBV Elektronik
RS (Exports)
Farnell
$0.562
$0.527
$0.423
Digiode
$0.506
Flip Electronics
Chip Stock
Vyrian
NAC Semi
$1.190
Cyclops Electronics Ltd
Nova Conductors
Ampacity Inc.
$0.405
Semicontronic
$0.395
$0.393
Corohmni
$0.477
Corphita
$0.480
Advanced Electronics
$0.826
$0.760
$0.712
Vigor
$1.120
Microchip USA
$3.704
Aztec Data Supply Inc.
$8.000
Glotronic Ltd.
Lixinc
Authorized Procurement Solutions
GreenTree Electronics
Problanco Electronics
Kepictronics
Epart123
$2.230
Eastek
$1.000
Argo Parts USA
TANS Electronics
Kulean Microsystems
Continental Prestige Electronics
A-Z Elektronik GmbH
SupplyDigital Components
Infinite Electronics LLP (Excess)
Formix International (Excess)
Futuretech Components
Bastille Electronics
UHIMA Technologies
This material provides durability and reliability for the peripheral driver, making it suitable for various applications.
Ease of installation and compatibility with modern electronic devices.
Enhanced safety and protection for the driver and connected devices.
Can withstand high temperatures, making it suitable for automotive applications.
Optimal voltage supply for efficient performance of the peripheral driver.
Quick response time ensures fast activation of the driver when needed.
Ability to both source and sink current allows for versatile functionality in driving peripherals.
Peripheral Drivers NCP5104DR2G attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
NCP5104DR2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Revision 24/Feb/2015 Copper Wire Update 13/Jan/2015
PCN Assembly/Origin - Mult Dev 02/Feb/2023
PCN Packaging - Mult MSL1 Pkg Rev 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
World Products
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
L7805CV
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
BTS724G
Infineon Technologies
BTS724G by Infineon Technologies is a MOS technology peripheral driver with 4 functions, built-in protections, and a max supply voltage of 40V. It is used in automotive applications for controlling power supplies at 12V, offering overcurrent, overvoltage, thermal protection, and transient suppression. The driver has a small outline package style with dual terminals and Gull Wing terminal form for efficient performance in compact spaces.
ULN2003A
Motorola
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDIP-T16;
UCC27201DRMT
Texas Instruments
UCC27201DRMT by Texas Instruments is a peripheral driver with 2 channels, 3A max output current, and 12V nominal voltage. It features under-voltage protection, operates in automotive temperature grade range (-40 to 140 °C), and has a small outline package style. Ideal for half-bridge based applications requiring source/sink output current flow direction.
BTS441RGNTMA1
BTS441RGNTMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 43V and built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 21A and is used as a buffer or inverter based peripheral driver in various applications requiring precise control of high currents.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BSP742TNT
BSP742TNT by Infineon Technologies is a Peripheral Driver with 8 terminals, MOS technology, and built-in protections for transient, over current, and over voltage. It operates in industrial temperature range (-40 to 85 °C) with a max supply voltage of 34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
IRS2101SPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VN800PSTR-E
STMicroelectronics' VN800PSTR-E is a peripheral driver with 8-36V power supplies, 0.7A max output current, and built-in protections. Ideal for automotive applications due to AEC-Q100 screening level and sink output current flow direction. Package style: small outline, terminal pitch: 1.27mm, and moisture sensitivity level of 3.
ITS4090QEPDXUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Finish: TIN; Moisture Sensitivity Level (MSL): 2A; JESD-609 Code: e3;
VNQ5050K-E
STMicroelectronics VNQ5050K-E is a 4-function peripheral driver with max supply voltage of 36V. It offers built-in protections for transient, over current, and over voltage. Ideal for applications requiring a compact design and high output current up to 2A.
ITS4880RCUMA1
ITS4880RCUMA1 by Infineon Technologies is a peripheral driver with 8 functions, built-in protections for transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 11-45 V. Ideal for applications requiring buffer or inverter based peripheral drivers in commercial extended temperature environments.
ADUM4223ARWZ
ADUM4223ARWZ by Analog Devices is a Peripheral Driver with 2 functions, operating at 3-5.5V. It offers thermal and under voltage protection, suitable for automotive applications. This small outline package has 16 terminals, Gull Wing form, and supports up to 4A output peak current limit.
ULN-2803LW
Vishay Sprague's ULN-2803LW is an 8-bit peripheral driver with a max supply voltage of 3V. It features open-collector output characteristics and built-in transient protections. Ideal for applications requiring sink current flow direction, this small outline package driver operates b/w -20°C to 85°C temperatures.
IRS21850SPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DRV103U
DRV103U by Texas Instruments is a peripheral driver with built-in protections for transient, over current, and thermal issues. It operates b/w -55 to 125 °C with a supply voltage range of 8-32 V. Ideal for military-grade applications requiring a small outline package style and NMOS technology.
BTT60101ERAXUMA1
BTT60101ERAXUMA1 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at a nominal voltage of 28V and has a max supply voltage of 36V. With a turn-on time of 150us, it is commonly used in automotive applications due to its AEC-Q100 screening level.
XLMG1210RVRT
XLMG1210RVRT by Texas Instruments is a peripheral driver with max supply voltage of 5.25V, thermal protection, and 19 terminals. Ideal for automotive applications, it has a turn-on time of 0.018us and operates b/w -40 to 125 °C.
NCV8402ASTT1G
NCV8402ASTT1G by Onsemi is a small outline peripheral driver with built-in protections against transient, over current, and over voltage. It has a nominal output peak current limit of 4.8A and interface IC type as buffer or inverter based. Ideal for applications requiring sink output current flow direction in automotive electronics.
UDN2987LWTR
Allegro MicroSystems
Allegro MicroSystems' UDN2987LWTR is a Peripheral Driver with 8 functions, 35V max supply voltage, and 0.5A output peak current limit. Ideal for applications requiring source flow direction, such as motor control systems. Features built-in protections against transient events, overcurrent, and thermal issues.
DRV103H/2K5
DRV103H/2K5 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections against transient, over current, and thermal issues. It is commonly used as a buffer or inverter based peripheral driver for industrial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP5106BDR2G
NCP5106BDR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications requiring high side drivers with peak current limit of 0.5A. The device has fast turn-on/off times of 0.17us and can withstand temperatures from -40 to 125°C.
NCP51810AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
NCP5106APG
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NCP5106ADR2G
NCP5106ADR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications, offering high side driver functionality with turn-on/off time of 0.17 us. Ideal for source/sink current flow control in automotive systems.
NCP5106BPG
NCP5111DR2G
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP5304DR2G
NCP5109ADR2G
NCP51513ABMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Built-in Protections: UNDER VOLTAGE;
NCP5104PG
NCP5109AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
NCP5109BDR2G
NCP5109BMNTWG
NCP51100ASNT1G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 12 V;
NCP5111PG
NCP5304PG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved