Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5109ADR2G by Onsemi is a peripheral driver with 15V power supply, under voltage protection, and turn-on/off time of 0.17us. Ideal for automotive applications, it features a small outline package style and gull wing terminal form for efficient performance in harsh environments.
Median Price
$1.005
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.408
100+ parts
-
1k+ parts
10k+ parts
Arrow
$0.409
Mouser Electronics
$0.960
$0.574
$0.505
$0.488
DigiKey
$1.050
$0.601
$0.520
$0.482
Farnell
$1.195
$0.643
$0.492
$0.450
Newark
$1.310
$0.771
$0.568
Element14
$1.364
$0.781
$0.507
$0.478
Verical
Digiode
$0.338
Nova Conductors
$0.550
Cyclops Electronics Ltd
Vyrian
Ampacity Inc.
$0.315
Corphita
$0.320
Corohmni
$0.352
Argo Parts USA
$0.533
Bastille Electronics
$0.522
$0.496
$0.490
Vigor
Advanced Electronics
$12.901
$11.740
$10.579
Perfect Parts
Kepictronics
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
ChipstoGo Electronic ltd
Authorized Procurement Solutions
A-Z Elektronik GmbH
Problanco Electronics
SupplyDigital Components
Continental Prestige Electronics
$0.491
$0.362
Lixinc
Kulean Microsystems
TANS Electronics
UHIMA Technologies
Plastic/epoxy material provides durability and reliability for long-term use.
Surface mount capability makes it easy to integrate into various electronic designs.
Built-in protection against under voltage helps safeguard connected components.
High maximum operating temperature allows for reliable performance in various environments.
Matte tin finish ensures good electrical conductivity and solderability.
Automotive temperature grade indicates suitability for use in automotive applications.
Suitable nominal supply voltage for powering the peripheral driver effectively.
Half bridge based interface IC type offers efficient control and compatibility for peripheral devices.
Source and sink output current flow direction provides flexibility in driving various components.
Peripheral Drivers NCP5109ADR2G attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
NCP5109ADR2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Revision 24/Feb/2015 Copper Wire Update 13/Jan/2015
PCN Assembly/Origin - Mult Dev 20/Dec/2022
PCN Packaging - Mult MSL1 Pkg Rev 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
BAV99WT1G
BAV99WT1G by Onsemi is a series connected diode with 0.006 us reverse recovery time. It is a small outline rectifier diode with 70V peak reverse voltage, ideal for surface mount applications in electronics requiring fast switching and low forward voltage drop.
LL4148
Weitron Technology
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
NC7WZ07P6X
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
LM555CM
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Diotec Semiconductor Ag
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Taitron Components
1N4148
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
FDD5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 42 W; Terminal Position: SINGLE; Terminal Form: GULL WING;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BTS3205NHUSA1
Infineon Technologies
BTS3205NHUSA1 by Infineon Technologies is a peripheral driver with a nominal output peak current limit of 0.55A and Gull Wing terminal form. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction, such as automotive electronics.
MAX14914BATE+
Analog Devices
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
ADUM5230ARWZ
ADUM5230ARWZ by Analog Devices is a CMOS peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and has built-in under voltage protection. With a max supply voltage of 5.5 V, it is ideal for industrial applications requiring true output polarity and Schmitt trigger input characteristics.
MC33879APEK-R2
Freescale Semiconductor
MC33879APEK-R2 by Freescale is a peripheral driver with 32 terminals, operating at -40 to 125 °C. It offers built-in protections for transient, over current, and over voltage situations. Ideal for automotive applications due to its MOS technology and true output polarity.
BTS442E2E3062A
BTS442E2E3062A by Infineon is a MOS technology peripheral driver with 4.5-42V supply, 70A output current limit, and built-in protections. It has a small outline package style for surface mount applications. Ideal for controlling high-power loads in automotive and industrial systems.
UCC27201DRMT
UCC27201DRMT by Texas Instruments is a peripheral driver with 2 channels, 3A max output current, and 12V nominal voltage. It features under-voltage protection, operates in automotive temperature grade range (-40 to 140 °C), and has a small outline package style. Ideal for half-bridge based applications requiring source/sink output current flow direction.
BTS3408GXT
BTS3408GXT by Infineon is a peripheral driver with 60V max supply voltage, built-in protections, and 0.55A nominal output peak current limit. It is used as a buffer or inverter-based peripheral driver in various applications requiring sink output current flow direction. The small outline package style makes it suitable for compact designs with its 1.75mm max seated height and dual terminal position.
BTS432E2
BTS432E2 by Infineon Technologies is a MOS peripheral driver with 5 terminals and built-in protections against transient, over current, over voltage, thermal, and under voltage. It operates at supply voltages ranging from 4.5V to 42V and has a nominal output peak current limit of 44A. This rectangular flange mount package is commonly used in automotive applications due to its AEC-Q100 screening level certification.
A2982SLWTR
Allegro MicroSystems
Allegro MicroSystems' A2982SLWTR is a small outline peripheral driver with 8 functions and built-in transient protection. It operates b/w -20 to 85°C, with a supply voltage range of 5-50V. Ideal for applications requiring a max output current of 0.35A, such as buffer or inverter-based interface ICs.
PTPS272C45ARHFR
PTPS272C45ARHFR by Texas Instruments is a peripheral driver with 2 functions, operating voltage range of 6-36V, and built-in protections. It is used in automotive applications due to its high side driver feature and standard input characteristics. The chip carrier package style with very thin profile makes it suitable for compact designs.
BTS441RGNTMA1
BTS441RGNTMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 43V and built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 21A and is used as a buffer or inverter based peripheral driver in various applications requiring precise control of high currents.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
FDC6331L
FDC6331L by Onsemi is a small outline, low profile peripheral driver with 6 terminals. It operates at a nominal voltage of 6.4V and has built-in transient protections. With a max output peak current limit of 9A, it is ideal for half bridge based applications requiring source and sink current flow control.
TDE1708DFT
STMicroelectronics' TDE1708DFT is a peripheral driver with 48V max supply voltage, 24V power supplies, and 0.3A max output current. Ideal for buffer or inverter-based applications, it offers transient and thermal protections, operates b/w -25 to 85 °C, and has a small outline package style.
VN808-E
VN808-E by STMicroelectronics is a peripheral driver with 8 functions and a max output current of 0.5A. It has built-in protections for transient, over current, thermal, and under voltage conditions. This IC is commonly used as a buffer or inverter based peripheral driver in various applications.
L6201
STMicroelectronics L6201 is a full bridge peripheral driver with 20 terminals. It operates at supply voltages b/w 12V to 48V, offering built-in transient and thermal protections. With a max output peak current of 5A, it is ideal for driving various loads in applications requiring true output polarity control.
ITS716GFUMA1
ITS716GFUMA1 by Infineon Technologies is a Peripheral Driver with 4 functions, operating at 5.5-40V. It offers built-in protections for transient, over current, and over voltage events. Ideal for applications requiring a small outline package and sink output current flow direction.
SZNUD3124LT1G
SZNUD3124LT1G by Onsemi is a Peripheral Driver with 2 functions, AEC-Q101 screening level, and built-in transient protection. It has 6 terminals, operates b/w -40 to 125 °C, and supports a supply voltage of 28 V. Ideal for applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.
L9822EPD013TR
STMicroelectronics L9822EPD013TR is a SIPO-based peripheral driver with 20 terminals, operating voltage range of 4.75-5.25V, and built-in transient and overcurrent protections. Ideal for automotive applications, it offers a turn-on/off time of 10us and nominal output peak current limit of 1.05A.
NCP45520IMNTWG-L
NCP45520IMNTWG-L by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 0.5V to 13.5V, and built-in protections for transient, over current, thermal, and under voltage conditions. It has a small outline package style with very thin profile suitable for industrial applications requiring sink output current flow direction at temperatures ranging from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP5106BDR2G
NCP5106BDR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications requiring high side drivers with peak current limit of 0.5A. The device has fast turn-on/off times of 0.17us and can withstand temperatures from -40 to 125°C.
NCP51810AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
NCP5106APG
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NCP5106ADR2G
NCP5106ADR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications, offering high side driver functionality with turn-on/off time of 0.17 us. Ideal for source/sink current flow control in automotive systems.
NCP5106BPG
NCP5111DR2G
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP5104DR2G
NCP5304DR2G
NCP51513ABMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Built-in Protections: UNDER VOLTAGE;
NCP5104PG
NCP5109AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
NCP5109BDR2G
NCP5109BMNTWG
NCP51100ASNT1G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 12 V;
NCP5111PG
NCP5304PG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved