Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NCP5111DR2G by Onsemi is a peripheral driver with 15V power supplies, under voltage protection, and 20V max supply voltage. It is used in automotive applications for half bridge based interface ICs with source and sink output current flow direction.
Median Price
$1.210
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.700
1k+ parts
$0.617
10k+ parts
-
Mouser Electronics
$0.574
$0.554
Newark
$1.220
$0.609
Element14
$1.415
$0.818
$0.767
$0.607
Flip Electronics (Authorized)
Farnell
$0.658
$0.542
Rochester
$0.684
$0.568
$0.506
Verical
$0.710
Digiode
$0.532
Nova Conductors
$0.642
Chip Stock
Flip Electronics
Vyrian
Semicontronic
$0.476
$0.464
$0.462
Ampacity Inc.
Corphita
$0.504
Corohmni
$0.560
Argo Parts USA
$0.622
Netroflash
Continental Prestige Electronics
$0.832
$0.478
Vigor
$1.120
Aztec Data Supply Inc.
$3.381
Microchip USA
$3.889
Advanced Electronics
$10.004
$9.104
$8.203
Lixinc
RC Electronics
$0.860
$0.810
$0.800
SupplyDigital Components
Problanco Electronics
TANS Electronics
A-Z Elektronik GmbH
Kulean Microsystems
Authorized Procurement Solutions
Assy Fe
UHIMA Technologies
Futuretech Components
Kepictronics
The use of plastic/epoxy material ensures durability and resistance to external factors, making this peripheral driver suitable for various environments.
With a maximum supply voltage of 20V, this peripheral driver can handle higher voltage requirements, providing flexibility in different applications.
The built-in protection against under voltage helps in preventing damage to the driver and connected peripherals in case of voltage drops below the specified threshold.
The automotive temperature grade ensures that this peripheral driver can withstand harsh temperature conditions typically found in automotive applications.
Peripheral Drivers NCP5111DR2G attributes and parameters. Explore more Peripheral Drivers devices from Onsemi
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
NCP5111DR2G Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Revision 24/Feb/2015 Copper Wire Update 13/Jan/2015
PCN Assembly/Origin - Mult Dev 20/Dec/2022
PCN Packaging - Mult MSL1 Pkg Rev 20/Dec/2018
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32F405RGT6TR
STMicroelectronics
STM32F405RGT6TR by STMicroelectronics is a 32-bit microcontroller with 64 terminals, operating at a max frequency of 26 MHz. It features DAC and ADC channels, along with DMA support. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
ECA2DHG4R7
Panasonic
ECA2DHG4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 200V rated DC voltage. It features tan delta of 0.15, leakage current of 0.0664mA, and ripple current of 50mA, making it ideal for applications requiring high capacitance stability and low leakage in through-hole mounting setups at temperatures ranging from -25 to 105°C.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM317T
Fairchild Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
MBR0530T1G
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
Rochester Electronics
International Semiconductor
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
IRS2101SPBF
IRS2101SPBF by Infineon Technologies is a Peripheral Driver with 8 terminals, operating voltage range of 10-20V. It offers built-in transient and under voltage protections, suitable for automotive applications due to its CMOS technology and small outline package style. With turn-on/off time of 0.22us, it can handle source/sink current flow up to 15V power supplies.
IRS2106STRPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
UDN-2981A
Vishay Intertechnology's UDN-2981A is an 8-function peripheral driver with built-in transient protection. Featuring 18 terminals in an in-line package, it operates b/w -20°C to 85°C. Ideal for applications requiring a buffer or inverter-based interface IC with fast turn-on/off times of 2us and 10us respectively.
NCP5106BDR2G
NCP5106BDR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications requiring high side drivers with peak current limit of 0.5A. The device has fast turn-on/off times of 0.17us and can withstand temperatures from -40 to 125°C.
VNQ5160K-E
STMicroelectronics' VNQ5160K-E is a 4-function peripheral driver with built-in protections. It operates on power supplies ranging from 8V to 36V, offering a turn-on/off time of 15us. This small outline package is ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
SN75451BDR
Texas Instruments
SN75451BDR by Texas Instruments is a peripheral driver with 2 functions, operating at 5V. It features open-collector output polarity and can handle a max output current of 0.5A. Ideal for applications requiring AND gate based peripheral drivers in commercial temperature grades.
IRS21856SPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Moisture Sensitivity Level (MSL): 2;
VNQ500PEP
STMicroelectronics' VNQ500PEP is a 36V peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It features 12 terminals in a small outline package suitable for buffer or inverter-based applications. With a supply voltage range of 5.5V to 36V, it is ideal for driving loads in automotive and industrial systems.
PTPS22919QDCKRQ1
PTPS22919QDCKRQ1 by Texas Instruments is a peripheral driver with 6 terminals, offering built-in protections for transient, over current, and thermal issues. It operates b/w -40 to 125 °C with a supply voltage range of 1.6V to 5.5V, making it ideal for automotive applications requiring a max output current of 1.5A.
BSP742RIXUMA1
BSP742RIXUMA1 by Infineon Technologies is a MOS technology-based peripheral driver with 8 terminals. It offers built-in protections for transient, over current, and over voltage scenarios. With a max supply voltage of 34V, it is suitable for applications requiring sink output current flow direction and a nominal output peak current limit of 1.2A.
NCP51810AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1; Terminal Finish: NICKEL PALLADIUM GOLD; Peak Reflow Temperature (C): 260; JESD-609 Code: e4;
ULN2003V12DR
ULN2003V12DR by Texas Instruments is a 7-bit peripheral driver with inverted output polarity and sink current flow direction. It operates b/w -40 to 125°C, has a nominal voltage of 50V, and offers transient protection. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
ULN2803AN
Motorola
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
IRS2304SPBF
IRS2304SPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is a CMOS technology-based interface IC type, suitable for automotive applications. This small outline, shrink pitch package has built-in protections against transient and under voltage conditions.
MAX4820EUP+
Analog Devices
MAX4820EUP+ by Analog Devices is an 8-bit peripheral driver with a supply voltage range of 2.3V to 5.5V, operating temperature from -40°C to 85°C, and turn-on/off time of 1µs. It features open-drain output characteristics and is ideal for industrial applications requiring buffer or inverter-based peripheral drivers in a compact small outline package.
ITS5215LCUMA1
ITS5215LCUMA1 by Infineon is a peripheral driver with 12 terminals, built-in protections for over/under voltage and current, and thermal protection. It operates b/w -30 to 85 °C with a supply voltage range of 5.5-40 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink output current flow direction.
MIC5841YN
Micrel
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
AUIR2085STR
AUIR2085STR by Infineon is a CMOS peripheral driver with 8 terminals, operating voltage of 10-15V. It offers built-in protections against transient, over current, and under voltage. Ideal for automotive applications due to AEC-Q100 screening and small outline package style.
NCV8460ADR2G
NCV8460ADR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 6V to 36V and has a nominal output peak current limit of 9A. This buffer or inverter based driver is commonly used in automotive applications due to its AEC-Q100 screening level.
TPS4H000AQPWPRQ1
TPS4H000AQPWPRQ1 by Texas Instruments is a Peripheral Driver with 4 functions, operating at -40 to 125 °C. It has built-in protections for transient, over current, thermal & under voltage. Ideal for automotive applications due to AEC-Q100 screening & high side driver feature.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NCP5106APG
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NCP5106ADR2G
NCP5106ADR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications, offering high side driver functionality with turn-on/off time of 0.17 us. Ideal for source/sink current flow control in automotive systems.
NCP5106BPG
NCP5104DR2G
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NCP5304DR2G
NCP5109ADR2G
NCP51513ABMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE; Built-in Protections: UNDER VOLTAGE;
NCP5104PG
NCP5109AMNTWG
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 10; Package Code: HVSON; Package Shape: SQUARE;
NCP5109BDR2G
NCP5109BMNTWG
NCP51100ASNT1G
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Nominal Supply Voltage: 12 V;
NCP5111PG
NCP5304PG
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved