Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ULN2003V12T16-13 by Diodes Inc. is a peripheral driver with 1 function, operating temperature range of -40 to 125°C, and a small outline package. It is commonly used in automotive applications for buffer or inverter based interface ICs requiring inverted output polarity and sink current flow direction.
Median Price
$0.187
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.410
100+ parts
$0.218
1k+ parts
$0.202
10k+ parts
-
Verical
$0.154
Arrow
$0.143
Farnell
$0.170
$0.120
$0.116
Element14
$0.432
$0.270
$0.228
DigiKey
RS (Exports)
$0.254
$0.208
Nova Conductors
TME
$0.153
Vyrian
Chip Stock
NAC Semi
Rutronik
$0.138
ComSIT Distribution GmbH
ComSIT USA
Semicontronic
$0.088
$0.086
$0.085
Ampacity Inc.
$0.191
Argo Parts USA
$0.196
Bastille Electronics
$0.192
$0.182
$0.180
Microchip USA
$1.128
Corohmni
$2.610
Aztec Data Supply Inc.
$13.030
Advanced Electronics
$15.377
$13.993
$12.609
GreenTree Electronics
Lixinc
Epart123
$2.950
Authorized Procurement Solutions
Continental Prestige Electronics
$0.250
$0.164
$0.131
Robosynatics
Lucentia Tech
$8.029
$7.865
Futuretech Components
The use of plastic/epoxy material makes the package lightweight and durable, ensuring the longevity of the product.
Being surface mountable allows for easy installation on circuit boards, saving space and simplifying the manufacturing process.
The built-in transient protection helps safeguard the peripheral driver and connected components from voltage spikes or transients.
With a high maximum operating temperature, this peripheral driver can handle demanding operating conditions without overheating.
The open-collector output allows for easy interfacing with external devices and flexibility in designing custom logic circuits.
The 20V nominal supply voltage provides compatibility with a wide range of electronic systems and power sources.
The bipolar technology used in this peripheral driver offers high speed and precise control, making it suitable for a variety of applications.
Peripheral Drivers ULN2003V12T16-13 attributes and parameters. Explore more Peripheral Drivers devices from Diodes Incorporated
Built-in Protections:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Current Flow Direction:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
Width:
ULN2003V12T16-13 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Diodes Incorporated is an international leader in the design and production of high-grade application specific standard products utilized in a wide variety of industries. The company has developed cutting-edge technology that enhances the performance and reliability of components for consumer, industrial, automotive and communication applications. Established in 1959, Diodes Incorporated has been providing superior services to its customers by creating innovative solutions from their world-class manufacturing centers located around the world. Their commitment to delivering quality products extends to their selection of materials which are carefully chosen to meet the demand of both commercial and military requirements.
Chairman and CEO
Keh-Shew Lu
CFO
Brett R. Whitmire
Lead Director
Angie Chen Button
Fab 1
Fabrication
Fab Initiation
1987
China
Shanghai
Wafer Capacity
40,000
Zizhu Fab 1
2013
18,500
G Fab
2008
UK
Greenock
8,000
Keelung Fab
1990
Taiwan
Keelung
58,000
Wuxi Fab
2004
Wuxi
190,000
Shanghai Fab
1993
110,000
1970
22,000
Hsinchu Fab
1998
Hsinchu
38,000
Fab 2
2003
20,000
SPFAB
1995
USA
South Portland
17,000
N/A
1982
Oldham
4,000
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM358M
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Laube Technology
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
BAV99-7-F
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
BSS123,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
ST890CDR
STMicroelectronics
ST890CDR by STMicroelectronics is a peripheral driver with 8 terminals, operating voltage range of 2.7-5.5V, and max output current of 1.2A. It features built-in protections against overcurrent and thermal issues, suitable for industrial applications requiring buffer or inverter-based interface ICs with fast turn-on/off times.
ULN2803AN
Motorola
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
NCV8405ADTRKG
NCV8405ADTRKG by Onsemi is an AEC-Q100 compliant peripheral driver with built-in protections for transient, over current, and over voltage. It operates in automotive applications at temperatures ranging from -40 to 150°C. With a nominal output peak current limit of 10.5A and a supply voltage of 5V, it serves as a buffer or inverter based peripheral driver for sink output current flow direction.
L298N
L298N by STMicroelectronics is a full bridge based peripheral driver with 2 functions and over current protection. It operates at a nominal voltage of 5V to 42V, with output polarity as true and source/sink current flow direction. This rectangular package is commonly used in applications requiring high power motor control.
MAX845ESA+
Maxim Integrated
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
IRS2101SPBF
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS2482S-100/T&R
DS2482S-100/T&R by Maxim Integrated is a peripheral driver with 8 terminals, operating at -40 to 85°C. It has a supply voltage range of 2.9V to 5.5V and is ideal for industrial applications requiring buffer or inverter-based interface ICs in compact designs.
TLE8444SLXUMA1
Infineon Technologies
TLE8444SLXUMA1 by Infineon Technologies is a half bridge based peripheral driver with a nominal output peak current limit of 2.4A. It features source and sink output current flow direction, making it suitable for applications requiring precise control of power delivery. This small outline package with 24 terminals is designed for surface mount assembly in various electronic systems.
MIC5841YN
Microchip Technology
MIC5841YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.
IRS2181SPBF
IRS2181SPBF by Infineon Technologies is a peripheral driver with 8 terminals and built-in transient & under voltage protections. It operates b/w -40 to 125 °C, with a supply voltage range of 10-20 V. Ideal for automotive applications due to its small outline package style and CMOS technology.
ISP752TFUMA1
Infineon's ISP752TFUMA1 is a Peripheral Driver with 8 terminals, offering built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and source output current flow direction.
BSP75NTA
Diodes Incorporated BSP75NTA is a small outline peripheral driver with 4 terminals. It has built-in protections for over current, over voltage, and thermal issues. With a max supply voltage of 32V, it is ideal for applications requiring a nominal output peak current limit of 1.1A.
VNI4140K-32
VNI4140K-32 by STMicroelectronics is a 24V peripheral driver with 4 bits, suitable for BUFFER OR INVERTER BASED applications. It features a small outline package with 24 terminals in gull wing form and matte tin finish. The device can withstand peak reflow temperature of 260°C for up to 30 seconds.
VN750SMPTR-E
STMicroelectronics' VN750SMPTR-E is a peripheral driver with 8-36V power supplies, 2A max output current, and built-in protections. Ideal for applications requiring source flow direction, it features a small outline package style and turn-on/off times of 40/30us.
IRS2113STRPBF
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MCZ33996EK
NXP Semiconductors
MCZ33996EK by NXP Semiconductors is a SIPO-based peripheral driver with 32 terminals, operating voltage range of 5-27V, and built-in protections against over/under voltage. Widely used in automotive applications due to its small outline package, thermal protection, and sink output current flow direction.
MIC2026-1YM-TR
Micrel
NCP360MUTBG
NCP360MUTBG by Onsemi is a Peripheral Driver with 6 terminals, operating voltage range of 1.2V to 20V, and built-in protections against transient, over/under voltage. It has a small outline package style suitable for industrial applications requiring source output current flow direction and fast turn-off time of 1.5us.
NX18P3001UKZ
NX18P3001UKZ by NXP Semiconductors is a Peripheral Driver with 12 terminals, operating at -40 to 85°C. It has a voltage range of 5.4-16V and comes in a rectangular plastic/epoxy package suitable for industrial applications. The package style is grid array with fine pitch, making it ideal for surface mount designs.
L9333MD-TR
L9333MD-TR by STMicroelectronics is a 20-terminal peripheral driver with built-in protections for transient, over current, and thermal issues. It operates at supply voltages ranging from 4.5V to 32V and has a max output current of 0.015A. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803ADW
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
ULN2803A
Youtai Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Output Polarity: INVERTED;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR; No. of Functions: 1;
Taejin Technology
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: .5 A; No. of Functions: 1;
ULN2003D1013TR
STMicroelectronics ULN2003D1013TR is a 7-bit buffer/inverter peripheral driver with max supply voltage of 3V. It features open-collector output, transient protection, and sink current flow direction. Ideal for applications requiring fast turn-on/off times in a small outline package.
ULN2803CDWR
ULN2803CDWR by Texas Instruments is an 8-function peripheral driver with open-collector output characteristics. It has built-in transient protections and a nominal output peak current limit of 0.5A, making it ideal for applications requiring sink current flow direction such as motor control systems.
ULN-2003A
ULN-2003A by Sprague Electric is a 7-bit bipolar peripheral driver with a max output current of 0.35 A and nominal voltage of 50 V. It features a rectangular plastic/epoxy package, dual terminal position, and operates in temperatures ranging from 0 to 70°C. Ideal for driving various loads in commercial applications.
ULN2003A
Vishay Intertechnology
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Driver No. of Bits: 7;
Allegro MicroSystems
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Minimum Operating Temperature: -20 Cel;
Sgs-ates Componenti Electronici S P A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; JESD-609 Code: e0;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved