Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TPS22925CYPHR by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 0.65V to 3.6V, and built-in transient protection. It features a compact rectangular package style with very thin profile and fine pitch, suitable for industrial applications requiring source and sink current flow control.
Median Price
$0.283
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$0.359
100+ parts
$0.244
1k+ parts
$0.125
10k+ parts
-
Mouser Electronics
$0.580
$0.320
$0.272
$0.251
Arrow
$0.203
RS (Exports)
$0.207
Nova Conductors
$0.293
Digiode
$0.341
Chip Stock
Vyrian
Semtec, LLC
Bristol Electronics
Sensible Micro Corp
Prism Electronics
Ampacity Inc.
$0.173
Semicontronic
$0.169
$0.168
Continental Prestige Electronics
$0.288
Argo Parts USA
$0.285
Advanced Electronics
$0.299
Corphita
$0.323
Parana Technologies
$7.665
$8.192
DigiPath Technology Company
$8.440
$7.765
ChromeModa Solutions
$8.612
$7.062
IDEA Electronic Components Group
$8.181
$7.751
Corohmni
$8.853
Lixinc
Futuretech Components
Netroflash
$0.279
$0.273
Allows for easy and secure installation on circuit boards.
Supports a wide range of voltage inputs for versatile applications.
Provides a standard and compact form factor for space-efficient design.
Ensures reliability and durability by protecting against voltage spikes.
Offers multiple connection points for enhanced versatility and functionality.
Enables high-density mounting on PCBs for efficient use of space.
Allows for operation with low voltage sources for energy efficiency.
Ensures reliable performance in high-temperature environments.
Provides operation in extreme cold conditions.
Offers corrosion resistance and good electrical conductivity.
Facilitates easy and secure connections to other components on the PCB.
Allows for a low-profile installation in compact devices.
Ensures a small footprint for efficient use of board space.
Provides a compact size suitable for space-constrained applications.
Designed to withstand harsh industrial environments.
Provides reliable and secure connections to other components.
Suitable for a wide range of voltage input requirements.
Allows for close spacing between terminals for high-density mounting.
Offers flexible interfacing options for various peripheral devices.
Supports bidirectional current flow for versatile applications.
Peripheral Drivers TPS22925CYPHR attributes and parameters. Explore more Peripheral Drivers devices from Texas Instruments
Built-in Protections:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Current Flow Direction:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
TPS22925CYPHR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LL4148
Promax-johnton
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
1N4148
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
OPA2277UA/2K5
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LM317T
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
Secos
LM3526MX-L/NOPB
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
FPF2116
FPF2116 by Onsemi is a peripheral driver with a max supply voltage of 5.5V and built-in protections for transient, over current, thermal, and under voltage. It has 5 terminals in a small outline package style suitable for industrial applications requiring a nominal output peak current limit of 0.3A.
ADUM3223BRZ-RL7
Analog Devices
ADUM3223BRZ-RL7 by Analog Devices is a peripheral driver with 2 functions, operating voltage range of 3V to 5.5V, and built-in thermal and under voltage protections. It is used in automotive applications due to its small outline package style and gull wing terminal form for reliable performance in harsh environments.
BTS452TATMA1
Infineon Technologies
BTS452TATMA1 by Infineon is a MOS technology peripheral driver with 4 terminals. It offers built-in protections for transient, over current, and over voltage situations. With a max supply voltage of 52V, it is ideal for applications requiring a nominal output peak current limit of 2.2A such as buffer or inverter based systems.
FPF2701MX
Fairchild Semiconductor
ULN2004AINSR
ULN2004AINSR by Texas Instruments is a 7-function peripheral driver with built-in transient protection. It operates b/w -40 to 105°C, has a peak current limit of 0.5A, and features sink output current flow direction. Ideal for applications requiring buffer or inverter-based interface ICs in compact designs.
NCP5106BDR2G
NCP5106BDR2G by Onsemi is a peripheral driver with 8 terminals, operating voltage range of 10-20V, and built-in under voltage protection. It is a small outline package suitable for automotive applications requiring high side drivers with peak current limit of 0.5A. The device has fast turn-on/off times of 0.17us and can withstand temperatures from -40 to 125°C.
MIC2026-2YM
Micrel
FSFR2100
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 9; Package Code: ZIP; Package Shape: RECTANGULAR;
VNQ7050AJTR
STMicroelectronics
VNQ7050AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 28 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
TPIC6B595DWR
TPIC6B595DWR by Texas Instruments is a register-based peripheral driver with 8 channels and open-drain output. It operates b/w -40 to 125 °C, with a supply voltage range of 4.5-5.5 V. Ideal for automotive applications due to built-in transient protection and small outline package style.
BSP742R
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; No. of Functions: 1;
DRV104PWP
DRV104PWP by Texas Instruments is a PWM-based peripheral driver with a max supply voltage of 32V and built-in protections for overcurrent and thermal issues. This small outline, heat sink package is ideal for industrial applications requiring a max output current of 1.2A in a compact form factor.
NUD3112LT1G
NUD3112LT1G by Onsemi is a CMOS technology-based peripheral driver with a max output current of 0.5A. It features built-in transient protection and operates in industrial temperature grade range (-40 to 85°C). This small outline, thin profile device is ideal for applications requiring sink output current flow direction.
MAX845ESA+T
Maxim Integrated
VND5N07TR-E
VND5N07TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 5V nominal voltage, has a turn-on time of 0.25us, and can handle output peak current limit of 5A. Ideal for applications requiring sink output current flow direction in compact spaces.
MCZ33996EK
Freescale Semiconductor
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: HSSOP; Package Shape: RECTANGULAR;
VND5160AJ-E
VND5160AJ-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is a CMOS technology-based buffer or inverter driver with turn-on time of 10us and turn-off time of 15us. Ideal for applications requiring sink output current flow direction and operating within the 4.5-36V power supply range.
BTS500101TADATMA2
BTS500101TADATMA2 by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max supply voltage of 18V and nominal output peak current limit of 48A. This small outline package is ideal for automotive applications requiring reliable performance in harsh environments.
FAN7888MX
FAN7888MX by Onsemi is a peripheral driver with 20V max supply voltage, -40 to 125 °C operating temp, and 0.22us turn-on time. Ideal for automotive applications, it offers transient and under voltage protections in a small outline package style.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
TPS22810DBVR
TPS22810DBVR by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V and output current of 2A. It operates b/w -40 to 105°C, suitable for industrial applications requiring transient, thermal, and under-voltage protections. The small outline package with gull wing terminals makes it ideal for surface mount designs in compact spaces.
TPS22919DCKR
TPS22919DCKR by Texas Instruments is a 6-terminal peripheral driver with built-in protections for transient, over current, and thermal issues. It has a max output peak current limit of 3A and operates in industrial temperature grade range (-40 to 105°C). This buffer/inverter-based driver is ideal for applications requiring sink output current flow direction.
TPS27081ADDCR
TPS27081ADDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V. It has built-in transient protection and operates in an industrial temperature range. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
TPS22975NDSGT
TPS22975NDSGT by Texas Instruments is a small outline, heat sink package with thermal protection. It operates b/w -40 to 105 °C and supports a max supply voltage of 5.7 V. Ideal for industrial applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
TPS22917DBVR
TPS22917DBVR by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It offers transient protection and operates b/w -40 to 125°C, making it suitable for automotive applications. The package measures 2.9mm x 1.6mm x 1.45mm and has a gull wing terminal form with nickel/palladium/gold finish.
TPS22919DCKT
TPS22919DCKT by Texas Instruments is a peripheral driver with 6 terminals, operating voltage range of 1.6V to 5.5V, and output current limit of 3A. It offers built-in protections against transient events, overcurrent, and thermal issues. Ideal for industrial applications requiring a compact thin profile package with sink flow direction.
TPS22810DRVR
TPS22810DRVR by Texas Instruments is a 6-terminal peripheral driver with max supply voltage of 18V. It offers built-in protections for transient, thermal, and under voltage conditions. Ideal for industrial applications requiring a compact (0.8mm seated height) and high output current (2A) solution.
TPS22917DBVT
TPS22917DBVT by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It operates in automotive-grade temperature range (-40 to 125°C) and offers transient protection. With a compact size of 2.9mm x 1.6mm x 1.45mm, it is ideal for source current flow direction applications requiring buffer or inverter-based interface ICs.
TPS27082LDDCR
TPS27082LDDCR by Texas Instruments is a peripheral driver with a max supply voltage of 8V and a max output current of 3A. It is commonly used in automotive applications for its built-in transient protection and open-drain output characteristics.
TPS2H160BQPWPRQ1
TPS2H160BQPWPRQ1 by Texas Instruments is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It offers built-in protections for transient, over current, thermal, and under voltage scenarios. Ideal for automotive applications due to its AEC-Q100 screening level and high side driver feature.
TPS22810DBVT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
TPS22810DRVT
TPS22810DRVT by Texas Instruments is a peripheral driver with a max supply voltage of 18V and built-in protections for transient, thermal, and under voltage. It has 6 terminals in a small outline package style suitable for industrial applications. The device can handle an output current of up to 2A in sink direction.
TPS27S100APWPR
TPS27S100APWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It has 14 terminals in a small outline package style suitable for automotive applications. The device offers a nominal output peak current limit of 7A with sink flow direction.
TPS22965DSGT
TPS22965DSGT by Texas Instruments is a peripheral driver with 8 terminals, operating from -40 to 105°C. It has built-in transient protection and supports a supply voltage range of 2.5V to 5.7V. Ideal for industrial applications requiring source/sink current flow control in a compact 0.8mm package.
TPS22860DBVR
TPS22860DBVR by Texas Instruments is a small outline, low profile peripheral driver with 6 terminals. It operates in industrial temperature range (-40 to 85°C) and has turn-on/off times of 0.015/0.02 us. Ideal for applications requiring fast switching speeds and compact design.
TPS22810TDBVRQ1
TPS27S100BPWPR
TPS27S100BPWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It operates in automotive temperature grades from -40 to 125°C and has a nominal output peak current limit of 7A. Ideal for high side driver applications with sink output current flow direction.
TPS22965DSGR
TPS22965DSGR by Texas Instruments is a Peripheral Driver with 8 terminals, operating b/w -40 to 105 °C. It has a supply voltage range of 2.5V to 5.7V and built-in transient protection. Ideal for industrial applications requiring source/sink current flow control in compact designs.
TPS27S100ARRKR
TPS27S100ARRKR by Texas Instruments is a high-side driver with 16 terminals and built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C, suitable for automotive applications. With a max supply voltage of 40V and turn-on time of 80µs, it offers efficient sink output current flow direction.
TPS27S100APWPT
TPS27S100APWPT by Texas Instruments is a small outline, thin profile peripheral driver with 14 terminals. It offers built-in protections for transient, over current, thermal, and under voltage conditions. With a max supply voltage of 40V and nominal output peak current limit of 7A, it is ideal for automotive applications requiring high side drivers.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved