Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VND5T100AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, AEC-Q100 screening level, and built-in protections. It is used for buffer or inverter based applications requiring a nominal output peak current limit of 22A.
Median Price
$1.666
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Arrow
$1.328
Verical
Farnell
$1.690
$1.500
Element14
$3.082
$2.219
Avnet
Digiode
$1.596
Maritex
$2.433
$1.215
Nova Conductors
$2.576
Cyclops Electronics Ltd
Chip Stock
Vyrian
VRG Components
Q Components
Velocity Electronics
ComSIT Distribution GmbH
Anansix
PC Components Company LLC
Bristol Electronics
Ampacity Inc.
$1.420
Corphita
$1.512
Aranea Global
$2.525
$2.424
Argo Parts USA
Corohmni
$2.817
Semicontronic
$2.870
$2.798
$2.784
Advanced Electronics
$2.902
$2.756
Aztec Data Supply Inc.
$6.650
IDEA Electronic Components Group
$12.052
$10.847
Microchip USA
$14.000
$13.910
$13.870
$13.830
MKK Technologies
$22.663
DigiPath Technology Company
Infinite Electronics LLP (Excess)
Formix International (Excess)
Authorized Procurement Solutions
iodParts Technologies Inc.
Perfect Parts
GreenTree Electronics
RC Electronics
Continental Prestige Electronics
$2.300
$1.800
A-Z Elektronik GmbH
Futuretech Components
Kepictronics
Epart123
$2.450
Lixinc
Parana Technologies
$14.410
Robosynatics
Lucentia Tech
$0.188
Plastic/Epoxy packaging provides durability and protection for the internal components of the peripheral driver, ensuring long-term reliability.
The built-in protections ensure the safe operation of the peripheral driver by preventing damage from various electrical faults or environmental conditions.
The high maximum supply voltage allows for compatibility with a wide range of electronic systems and applications.
The high output peak current limit of 22 A enables the peripheral driver to handle high-power devices or components effectively.
The interface IC type ensures compatibility with various input/output signals, making the peripheral driver versatile in different circuit designs.
Peripheral Drivers VND5T100AJTR-E attributes and parameters. Explore more Peripheral Drivers devices from STMicroelectronics
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Screening Level:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
VND5T100AJTR-E Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Pkg Cavity ID Add 9/Mar/2017 Mult Dev Wire Conversion 17/Mar/2021
PCN Assembly/Origin - Mult Dev Assembly Chg 18/Oct/2019
PCN Packaging - Material Barrier Bag 17/Dec/2020 APG/15/9380 07/Sep/2015
STMicroelectronics is a global leader in the semiconductor manufacturing industry, with over 35 years of experience providing innovative and advanced technologies for customers around the world. Headquartered in Netherlands, STMicroelectronics has more than 51,323 employees worldwide and operates across 32 countries all over Europe, Asia-Pacific and the Americas. The company’s portfolio includes integrated circuits, discrete components, application-specific standard products, and computer chipsets. STMicroelectronics serves a wide range of industries such as automotive, consumer markets, healthcare and industrial applications.
President, CEO
Jean-Marc Chery
President, CFO, Finance, Purchasing,Enterprise Risk Management & Resilience
Lorenzo Grandi
President, Sales & Marketing
Jerome Roux
Castelletto
Fabrication
Fab Initiation
1968
Italy
Wafer Capacity
SGFAB AMK 6
2000
Singapore
29,000
AG200
Agrate Brianza
14,000
RST 8
France
Rousset
35,000
Crolles 1
1993
Crolles
30,000
Crolles 2-ext. mod 5
Crolles 2-ext. mod 2
2022
Crolles 2-ext. mod 3
2023
Crolles 2
2004
28,000
1985
SiC Fab
2006
Sweden
Norrköping
10,000
Fab 3
2005
Tours
2,000
Fab 1 & Fab 2
1978
55,000
Fab 2
1997
Catania
SGFAB-AMK 6E
2003
145,000
SGFAB-AMJ 9
1984
152,000
AG300 (R3)
1980
25,000
1987
34,000
AG300
2024
Crolles 2-ext. mod 1
2020
Fab 1 6-inch fab
2013
11,000
SiC 6-inch line
2021
2,500
200mm GaN
2018
SGFAB-AMK 8
2001
Crolles 2- JV Fab
SGFAB-AMK 6
2016
38,125
SGFAB-AMK 2E
2010
20,000
Silicon Carbide A.B.
SiC wafer/EPI Fab
SiC Device Fab
2025
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Fagor Electronica S Coop
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Terminal Finish: MATTE TIN; Maximum Operating Temperature: 200 Cel; Maximum Output Current: .15 A; JESD-609 Code: e3;
Taiwan Semiconductor
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
Cheng-yi Electronic
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
VNI4140K
VNI4140K by STMicroelectronics is a 24V peripheral driver with 4 functions, built-in protections, and 1.3A output current limit. It comes in a small outline package with gull wing terminals for sink flow direction applications. Ideal for driving various peripherals in electronic systems requiring reliable protection and control features.
ULN2068B
Motorola
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: HDIP; Package Shape: RECTANGULAR;
BTS70202EPAXUMA1
Infineon Technologies
BTS70202EPAXUMA1 by Infineon is a peripheral driver with 14 terminals, offering built-in protections against transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110 us. This rectangular package is ideal for automotive applications requiring a nominal output peak current limit of 5A.
ISP752TFUMA1
Infineon's ISP752TFUMA1 is a Peripheral Driver with 8 terminals, offering built-in protections for over current, over voltage, thermal, and under voltage. It operates b/w -30 to 85 °C with a supply voltage range of 6-52 V. Ideal for applications requiring a small outline package style and source output current flow direction.
LMG1210RVRR
Texas Instruments
LMG1210RVRR by Texas Instruments is a peripheral driver with 2 channels, capable of handling a max output current of 3A. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in thermal and under voltage protections. This chip carrier package with very thin profile is suitable for applications requiring fast turn-on/off times (0.018us) and source/sink current flow direction.
ISO8200B
ISO8200B by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 10.5-36 V, making it suitable for automotive applications requiring a nominal output peak current limit of 1.1 A.
TPS22965QWDSGTQ1
TPS22965QWDSGTQ1 by Texas Instruments is a small outline, heat sink package with built-in transient protection. It operates b/w -40 to 125 °C and supports a supply voltage range of 2.5V to 5.5V, making it ideal for automotive applications requiring source and sink current flow control.
BTS442E2E3062A
BTS442E2E3062A by Infineon is a MOS technology peripheral driver with 4.5-42V supply, 70A output current limit, and built-in protections. It has a small outline package style for surface mount applications. Ideal for controlling high-power loads in automotive and industrial systems.
NX18P3001UKZ
NXP Semiconductors
NX18P3001UKZ by NXP Semiconductors is a Peripheral Driver with 12 terminals, operating at -40 to 85°C. It has a voltage range of 5.4-16V and comes in a rectangular plastic/epoxy package suitable for industrial applications. The package style is grid array with fine pitch, making it ideal for surface mount designs.
TPS27S100ARRKT
TPS27S100ARRKT by Texas Instruments is a high-side driver with built-in protections for transient, over current, thermal, and under voltage. It operates b/w -40 to 125°C and supports a supply voltage range of 4-40V. This peripheral driver in chip carrier package is ideal for automotive applications requiring fast turn-on/off times.
UDN2987LWTR-6
Allegro MicroSystems
Allegro MicroSystems' UDN2987LWTR-6 is a bipolar technology peripheral driver with 8 bits. It has a max output current of 0.35 A and operates b/w -20 to 85°C. Ideal for applications requiring small outline surface mount packages.
NCV8460ADR2G
Onsemi
NCV8460ADR2G by Onsemi is a peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates within a supply voltage range of 6V to 36V and has a nominal output peak current limit of 9A. This buffer or inverter based driver is commonly used in automotive applications due to its AEC-Q100 screening level.
FAN7388MX
FAN7388MX by Onsemi is a half bridge based peripheral driver with 3 functions. It operates at supply voltages b/w 10V to 15V, offering under voltage protection. With a small outline package style, it is ideal for automotive applications requiring source and sink output current flow direction.
FPF2109
Fairchild Semiconductor
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
TPS27S100APWPR
TPS27S100APWPR by Texas Instruments is a peripheral driver with a max supply voltage of 40V and built-in protections for transient, over current, thermal, and under voltage. It has 14 terminals in a small outline package style suitable for automotive applications. The device offers a nominal output peak current limit of 7A with sink flow direction.
NUD3160DMT1G
NUD3160DMT1G by Onsemi is a Peripheral Driver with 2 functions, operating at -40 to 125 °C. It has a max supply voltage of 60 V and output current of 0.15 A. Ideal for automotive applications requiring BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface ICs.
AUIPS2041LTR
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 4; Package Code: SOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; THERMAL;
AD5749ACPZ
Analog Devices
AD5749ACPZ by Analog Devices is a peripheral driver with 32 terminals, operating voltage range of 2.7-55V, and max supply current of 6.2mA. It has a square package shape and is suitable for industrial applications requiring buffer or inverter-based interface ICs with source current flow direction.
ULN-2803LW
Vishay Sprague
Vishay Sprague's ULN-2803LW is an 8-bit peripheral driver with a max supply voltage of 3V. It features open-collector output characteristics and built-in transient protections. Ideal for applications requiring sink current flow direction, this small outline package driver operates b/w -20°C to 85°C temperatures.
VND600SPTR-E
VND600SPTR-E by STMicroelectronics is a 2-function peripheral driver with built-in protections. It operates b/w -40 to 150 °C, with a supply voltage range of 5.5-36 V. Ideal for automotive applications due to its small outline and source current flow direction.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
VND5050JTR-E
VND5050JTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used for buffer or inverter-based interface ICs, offering sink output current flow direction. The small outline package with low profile makes it suitable for various applications requiring reliable driving capabilities.
VND5N07TR-E
VND5N07TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It operates at 5V nominal voltage, has a turn-on time of 0.25us, and can handle output peak current limit of 5A. Ideal for applications requiring sink output current flow direction in compact spaces.
VND5050AJTR-E
VND5050AJTR-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for various applications requiring source output current flow direction. The small outline package style with low profile makes it suitable for compact designs.
VND5N07-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Output Current Flow Direction: SINK;
VND5160JTR-E
VND5160JTR-E by STMicroelectronics is a Peripheral Driver with 2 functions, operating at 4.5-36 V. It offers built-in protections against transient, over current, and over voltage. This CMOS technology driver has a turn-on time of 10 us and is ideal for BUFFER OR INVERTER BASED applications.
VND5T016ASPTR-E
VND5T016ASPTR-E by STMicroelectronics is a peripheral driver with 16 terminals, operating voltage range of 8-36 V. AEC-Q100 compliant, it offers built-in protections for transient, over/under voltage & thermal issues. Ideal for automotive applications due to its small outline package and sink output current flow direction.
VND5050J-E
VND5050J-E by STMicroelectronics is a peripheral driver with 36V max supply voltage, built-in protections, and 12 terminals. It is used as a buffer or inverter-based peripheral driver for applications requiring sink output current flow direction. The package style is small outline with low profile and matte tin terminal finish.
VND5050AJ-E
VND5050AJ-E by STMicroelectronics is a peripheral driver with 12 terminals, operating voltage range of 4.5-36 V, and built-in protections against various faults. It features a small outline package style suitable for compact designs. Ideal for applications requiring source output current flow direction and interface IC type as buffer or inverter based peripheral driver.
VND5025AKTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Package Equivalence Code: SOP24,.4,32;
VND5050AK-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Built-in Protections: TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE;
VND5160AJTR-E
VND5160AJTR-E by STMicroelectronics is a Peripheral Driver with 36V max supply voltage, 4.5V min supply voltage, and 13V nominal voltage. It features built-in protections for transient, over current, over voltage, thermal, and under voltage applications in various electronic systems. This CMOS technology driver has a turn-on time of 10us and turn-off time of 15us suitable for BUFFER OR INVERTER BASED PERIPHERAL DRIVER interface IC types.
VND5160J-E
VND5160J-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This compact CMOS technology driver is suitable for applications requiring buffer or inverter based peripheral drivers.
VND5T050AKTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: HSSOP; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
VND5E160AJTR-E
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 12; Package Code: HLSSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage: 36 V;
VND5050AKTR-E
VND5050AKTR-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, over voltage, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
VND5050K-E
VND5050K-E by STMicroelectronics is a 24-terminal peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates on power supplies ranging from 8V to 36V and has a max supply voltage of 36V. This rectangular package with gull wing terminals is ideal for buffer or inverter-based interface IC applications.
VND5050KTR-E
VND5050KTR-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, thermal, and under voltage. It operates within a supply voltage range of 4.5V to 36V and has 24 terminals in a small outline package style. Ideal for applications requiring buffer or inverter based peripheral drivers with sink output current flow direction.
VND5012AKTR-E
VND5012AKTR-E by STMicroelectronics is a peripheral driver with 2 functions. It has a max supply voltage of 36V and operates on power supplies ranging from 8V to 36V. This IC type is commonly used as a buffer or inverter based peripheral driver for various applications.
VND5T100LAJTR-E
VND5T100LAJTR-E by STMicroelectronics is a peripheral driver with a max supply voltage of 36V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage. This driver is commonly used in automotive applications due to its AEC-Q100 screening level.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved