Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTS141BKSA1 by Infineon is a MOS technology peripheral driver with 12V nominal voltage and 12A output peak current limit. It offers overcurrent, overvoltage, and thermal protections, making it ideal for applications requiring sink output current flow direction in automotive systems. The package style is flange mount with a rectangular shape and single terminal position.
Median Price
$3.100
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$2.910
1k+ parts
$2.630
10k+ parts
-
Digiode
$2.945
Nova Conductors
$3.695
Vyrian
Chip Stock
VNN
Bristol Electronics
Micros
$3.379
$3.265
Partservice
$3.518
$3.443
Micros sp.j. W. Kędra i J. Lic
$3.768
$3.688
Semicontronic
$2.564
$2.551
Ampacity Inc.
Corphita
$2.790
Continental Prestige Electronics
$3.363
$3.296
Argo Parts USA
Corohmni
$3.590
Modulus Dynamics
$3.446
$3.303
Netroflash
$3.511
$3.437
Advanced Electronics
$3.769
Aztec Data Supply Inc.
$6.954
AZTECH Wire
$16.014
Microchip USA
$16.240
Perfect Parts
Authorized Procurement Solutions
Futuretech Components
GreenTree Electronics
iodParts Technologies Inc.
The use of plastic/epoxy as the package body material ensures durability and protection for the internal components of the peripheral driver.
The built-in protections for over current, over voltage, and thermal ensure the safety of connected devices and prevent damage to the peripheral driver itself.
Operating at 12V allows for compatibility with a wide range of devices and power sources.
Having 3 terminals simplifies the installation process and makes it easier to connect the peripheral driver to other components.
The use of tin as the terminal finish provides good conductivity and corrosion resistance, ensuring reliable performance over time.
Using MOS technology allows for efficient and reliable operation of the peripheral driver, making it suitable for various applications.
Having a nominal supply voltage of 12V ensures compatibility with a wide range of devices and power sources.
With a turn-on time of 100us, this peripheral driver can quickly respond to input signals and provide timely output.
The 2.54mm terminal pitch allows for easy connection with other components, making installation and integration hassle-free.
With a nominal output peak current limit of 12A, this peripheral driver can handle higher currents, making it suitable for demanding applications.
The interface IC type of buffer or inverter based peripheral driver allows for flexible and versatile integration with other systems and components.
With a turn-off time of 170us, this peripheral driver can quickly deactivate the output, ensuring efficient control and operation.
Having output current flow direction as sink allows for effective control and regulation of current flow, making this peripheral driver a reliable choice.
Peripheral Drivers BTS141BKSA1 attributes and parameters. Explore more Peripheral Drivers devices from Infineon Technologies
Built-in Protections:
Driver No. of Bits:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
No. of Functions:
No. of Terminals:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Turn-off Time:
Turn-on Time:
BTS141BKSA1 Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Infineon Technologies AG is a leading global semiconductor manufacturer and provider of comprehensive solutions for automotive, industrial, and consumer applications. Founded in 1999, the company has grown to become one of the largest semiconductor manufacturers in Europe. Infineon is headquartered in Neubiberg, Germany with operations across countries in Europe and Asia Pacific. Infineon provides microelectronics products that address many of today's societal challenges affecting energy efficiency, mobility, security and connectivity. Over the past two decades Infineon has become a major player in the semiconductor industry with an impressive portfolio of innovative technologies. As one of only four companies that produce DRAM chips for automobiles, Infineon produces cutting-edge processors for use in advanced driver assistance systems (ADAS). Likewise, they specialize in providing advanced embedded secure microcontrollers that are essential for connected devices. Furthermore, they offer integrated circuit solutions for industrial power control such as motor controllers and embedded gate drivers.
CEO
Jochen Hanebeck
Chief Financial Officer
Sven Schneider
Chief Marketing Officer
Andreas Urschitz
Villach 300mm
Fabrication
Fab Initiation
2011
Austria
Villach
Wafer Capacity
11,000
Kulim 2
2016
Malaysia
Kulim
79,500
Dresden - Module 3
1999
Germany
Dresden
58,000
Villach Building
2,000
Regensburg
1986
60,000
Dresden 200 - Module 1
1995
28,000
Dresden 200 - Module 2
1996
Building 38
2005
500
Building 47
Kulim 1
2006
110,000
Mesa Facility
1990
USA
Mesa
3,000
Villach 150mm
1981
35,000
Villach 200mm
68,000
Temecula
30,000
2021
2018
5,000
Kulim 3
2024
Fab 25
Austin
31,000
Dresden - Module 4
2026
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Style (Meter): SMALL OUTLINE; Maximum Operating Temperature: 150 Cel;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Lite-on Semiconductor
LM7805CT
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Taiwan Semiconductor
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V; Terminal Finish: Tin/Lead (Sn/Pb);
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
Fagor Electronica S Coop
TLE8444SLXUMA1
Infineon Technologies
TLE8444SLXUMA1 by Infineon Technologies is a half bridge based peripheral driver with a nominal output peak current limit of 2.4A. It features source and sink output current flow direction, making it suitable for applications requiring precise control of power delivery. This small outline package with 24 terminals is designed for surface mount assembly in various electronic systems.
SI1040X-T1-GE3
Vishay Intertechnology
SI1040X-T1-GE3 by Vishay Intertechnology is a Peripheral Driver with 6 terminals, 8A output current, and built-in transient protection. It operates at supply voltages ranging from 1.8V to 8V and is ideal for buffer or inverter-based interface IC applications requiring source and sink current flow control.
BTS432E2E3062A
BTS432E2E3062A by Infineon Technologies is a peripheral driver with a max supply voltage of 42V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based driver has a nominal output peak current limit of 44A and is commonly used as a buffer or inverter based peripheral driver.
BSP452E6327
BSP452E6327 by Infineon Technologies is a Peripheral Driver with 4 terminals, offering built-in protections against transient, over current, and over voltage. It operates at a supply voltage range of 5-34V and has a turn-on time of 100µs. Ideal for applications requiring buffer or inverter based peripheral drivers in compact spaces.
VNQ660SP13TR
STMicroelectronics
STMicroelectronics' VNQ660SP13TR is a MOS technology-based peripheral driver with 6A max output current. It operates at supply voltages of 6-24V, offering built-in protections against transient, over/under voltage & more. Ideal for applications requiring buffer or inverter-based interface ICs with sink output current flow direction.
MIC5801YWM
Microchip Technology
MIC5801YWM by Microchip Technology is an 8-function peripheral driver with a max supply current of 2mA. It operates in industrial temperature range (-40 to 85°C) and has a nominal voltage of 5V. This small outline package IC is ideal for applications requiring inverted output polarity and sink current flow direction.
BTS6163DAUMA1
BTS6163DAUMA1 by Infineon is a peripheral driver with max supply voltage of 62V, built-in protections for transient, over current, and over voltage. It has turn-on time of 300us and nominal output peak current limit of 5.5A. Ideal for automotive applications requiring high-voltage control and protection features.
BTS500402SFAXUMA1
BTS500402SFAXUMA1 by Infineon Technologies is a peripheral driver with 36 terminals, built-in protections for transient, over current, and over voltage. It operates at a max supply voltage of 5.5V and is AEC-Q100 compliant. Ideal for applications requiring a nominal output peak current limit of 11A and turn-on time of 640µs in automotive electronics.
ISP452XT
ISP452XT by Infineon Technologies is a peripheral driver with a max supply voltage of 34V and built-in transient protection. It operates b/w -30°C to 85°C, suitable for various applications requiring a small outline package style. With a nominal output peak current limit of 0.7A, it serves as an interface IC type buffer or inverter-based peripheral driver.
AUIPS7091GTR
International Rectifier
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Maximum Output Current: 1.5 A;
FAN7391MX
Fairchild Semiconductor
HALF BRIDGE BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
ULN-2065B
Sprague Electric
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MIC5842YN
MIC5842YN by Microchip Technology is an 8-bit SIPO-based peripheral driver with inverted output polarity. It operates at a nominal voltage of 5V and has a max supply current of 16mA. Ideal for industrial applications, it offers built-in transient protections and sink output current flow direction.
VNQ7040AYTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
ISO8200BQTR
ISO8200BQTR by STMicroelectronics is a peripheral driver with 32 terminals, operating voltage range of 2.75V to 36V, and built-in protections for transient, over current, over voltage, thermal, and under voltage. It has a max output current of 1.3A and is suitable for automotive applications requiring buffer or inverter based peripheral drivers with standard input characteristics.
UDN-2981A
Vishay Intertechnology's UDN-2981A is an 8-function peripheral driver with built-in transient protection. Featuring 18 terminals in an in-line package, it operates b/w -20°C to 85°C. Ideal for applications requiring a buffer or inverter-based interface IC with fast turn-on/off times of 2us and 10us respectively.
IRS2304SPBF
IRS2304SPBF by Infineon Technologies is a peripheral driver with a max supply voltage of 20V. It is a CMOS technology-based interface IC type, suitable for automotive applications. This small outline, shrink pitch package has built-in protections against transient and under voltage conditions.
VND10N06TR-E
VND10N06TR-E by STMicroelectronics is a small outline peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 10A and turn-on time of 1.8us. Ideal for applications requiring sink output current flow direction in compact spaces.
AUIRS21844S
AUIRS21844S by International Rectifier is a half bridge peripheral driver with 2 bits, 15V nominal voltage, and 2.3A output peak current limit. It is designed for automotive applications, featuring built-in transient and under voltage protections, CMOS technology, and source/sink current flow direction.
ADUM7234BRZ
Analog Devices
ADUM7234BRZ by Analog Devices is a half bridge based peripheral driver with 16 terminals. It operates b/w -40 to 105 °C and supports a max supply voltage of 18 V. With turn-on/off time of 0.2 us, it's ideal for industrial applications requiring source/sink output current flow control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTS141
Infineon
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Shape: RECTANGULAR; JESD-30 Code: R-PSFM-T3; Terminal Finish: TIN;
BTS141TCBUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G3; Output Current Flow Direction: SINK;
BTS141TCXT
BTS141TCXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTS133TCBUMA1
Peripheral Drivers; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 7 A;
BTS117BKSA1
BTS117BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 3 terminals, a nominal output peak current limit of 25A, and turn-on time of 70 us. This rectangular package style flange mount device is ideal for applications requiring sink output current flow direction.
BTS134DATMA1
BTS134DATMA1 by Infineon Technologies is a peripheral driver with a small outline package shape and gull wing terminal form. It offers built-in protections against transient, over current, over voltage, and thermal issues. With a nominal voltage of 12V and a max output peak current limit of 24A, it is suitable for applications requiring buffer or inverter based interface ICs.
BTS133BKSA1
BTS133BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for over current, over voltage, and thermal issues. It has a nominal output peak current limit of 28A and a turn-on time of 100µs. This rectangular package style device is ideal for applications requiring sink output current flow direction in automotive systems.
BTS142DATMA1
BTS142DATMA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a nominal voltage of 12V and a nominal output peak current limit of 45A. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTS117TCXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: TO-263; Package Shape: RECTANGULAR; Width: 9.25 mm;
BTS134DXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Turn-off Time: 100 us;
BTS133TCXT
BTS133TCXT by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 7A and turn-on time of 100us. This small outline package is ideal for applications requiring sink output current flow direction in a compact form factor.
BTS134D
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Terminal Finish: TIN;
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G2; No. of Functions: 1;
BTS141E3045ANTMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Power Supplies (V): 12;
BTS142DXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Turn-on Time: 120 us;
BTS117E3045A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Qualification: Not Qualified; Technology: MOS;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Package Equivalence Code: SMSIP3H,.55TB;
BTS141E3045A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Qualification: Not Qualified; JESD-30 Code: R-PSSO-G2;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G2;
BTS118DATMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Length: 6.5 mm;
BTS149
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Shape: RECTANGULAR; Input Characteristics: SCHMITT TRIGGER; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved