Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Qualification: Not Qualified; JESD-30 Code: R-PSSO-G2;
Median Price
-
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Cyclops Electronics Ltd
1+ parts
100+ parts
1k+ parts
10k+ parts
VNN
Digiode
Vyrian
Nova Conductors
Bristol Electronics
Atlantic Semiconductor
Q Components
Corohmni
$7.291
Modulus Dynamics
$9.601
$9.217
$8.833
Aztec Data Supply Inc.
$12.256
AZTECH Wire
$18.620
$17.880
$17.520
$17.170
Andel Nordic
$26.760
$18.730
Ampacity Inc.
$40.500
Component Stockers USA
$99.990
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Glotronic Ltd.
Argo Parts USA
Lixinc
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Assy Fe
Continental Prestige Electronics
Corphita
Metaverse IC Inc.
Bastille Electronics
Perfect Parts
Peripheral Drivers BTS141E3045A attributes and parameters. Explore more Peripheral Drivers devices from Siemens
Built-in Protections:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
No. of Functions:
No. of Terminals:
Output Characteristics:
Output Current Flow Direction:
Nominal Output Peak Current Limit:
Output Polarity:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
Turn-off Time:
Turn-on Time:
BTS141E3045A Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Siemens is an industrial conglomerate, with businesses selling components and equipment for factory automation, railway equipment, electrical distribution equipment, and medical equipment. Through spinoffs it owns a controlling stake in separately listed Siemens Healthineers and minority take in Siemens Energy, also publicly listed. Healthineers supplies medical imaging equipment, while Siemens Energy supplies power generation, and wind turbines, respectively.
DS18B20U+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Housing: PLASTIC; Minimum Supply Voltage: 3 V;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
Onsemi
Eic Semiconductor
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
1N4148
Microchip Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Crimson Semiconductor
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
Weitronic Enterprise
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
BSS138
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3.5 ohm; Maximum Drain Current (ID): .2 A; Peak Reflow Temperature (C): NOT SPECIFIED;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
M24308/2-1F
Cristek Interconnects
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Rows Loaded: 2; Shell Size: 1/E; Filter Feature: NO;
FPF2110
FPF2110 by Onsemi is a MOS technology-based peripheral driver with built-in protections against transient, over current, and over voltage. It operates b/w -40 to 85 °C with a supply voltage range of 1.8-5.5 V, making it suitable for industrial applications requiring a max output current of 0.8 A in a compact package style measuring 2.9mm x 1.6mm x 1.4mm.
ISO1H812GAUMA1
Infineon Technologies
Infineon's ISO1H812GAUMA1 is a 36-terminal peripheral driver with 8-bit driver configuration and 0.625 A output current. It operates on power supplies of 3.3/5,15/30 V and has a max output peak current limit of 2.2 A. Ideal for applications requiring sink flow direction such as half bridge based interface ICs in small outline packages.
MIC5891YWM-TR
MIC5891YWM-TR by Microchip Tech is a Peripheral Driver with 8 bits, 12V max supply voltage, and 5V min supply voltage. It has a small outline package style and operates in industrial temperature range. Ideal for buffer or inverter-based peripheral driver applications due to its open-emitter output characteristics and built-in transient protection.
ULN2003ADR2G
ULN2003ADR2G by Onsemi is a 16-terminal peripheral driver with open-collector output polarity. It operates b/w -20 to 85°C, suitable for various applications requiring inverted output characteristics and sink current flow direction. This small outline package IC is ideal for buffer or inverter-based interface designs at a nominal voltage of 50V.
ULN2003LVPWR
Texas Instruments
ULN2003LVPWR by Texas Instruments is a 7-bit peripheral driver with a nominal output peak current limit of 1A. It features built-in transient protections and operates b/w -40 to 85°C. Ideal for applications requiring inverted output polarity and sink current flow direction in a small outline, thin profile package.
FDC6330L_NL
FDC6330L_NL by Fairchild Semiconductor is a CMOS peripheral driver with 6 terminals, 2.3A output current, and built-in transient protection. It operates in temperatures ranging from -55 to 150°C and is ideal for military-grade applications requiring a low-profile, small outline package with source current flow direction.
VNS3NV04DP-E
STMicroelectronics
VNS3NV04DP-E by STMicroelectronics is a peripheral driver with built-in thermal and overvoltage protections. It has 2 functions, 8 terminals, and a peak output current limit of 5A. Ideal for applications requiring sink output flow direction, it features a turn-on time of 1.35us and turn-off time of 10us in a small outline package style.
FPF2123
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
BTS640S2GATMA1
BTS640S2GATMA1 by Infineon is a MOS technology peripheral driver with 6 terminals. It offers built-in protections for over current, over voltage, thermal, and under voltage. With a max supply voltage of 34V and nominal output peak current limit of 19A, it's ideal for applications requiring buffer or inverter based peripheral drivers.
VNQ7140AJTR
VNQ7140AJTR by STMicroelectronics is a 16-terminal peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C with a supply voltage range of 4-28 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
ULN-2065B
Sprague Electric
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
VN808CMTR-32-E
STMicroelectronics' VN808CMTR-32-E is a peripheral driver with 8 functions, operating at supply voltages of 10.5V to 32V. It offers built-in thermal and under voltage protections, suitable for automotive applications with a temperature range from -40°C to 125°C. The driver has a small outline package style, source output current flow direction, and turn-on/off times of 100us and 150us respectively.
ADP195ACPZ-R7
Analog Devices
ADP195ACPZ-R7 by Analog Devices is a peripheral driver with 6 terminals, operating voltage range of 1.1V to 3.6V, and industrial temperature grade up to 85°C. It features a small outline package style suitable for buffer or inverter-based applications requiring source current flow direction. The device is designed for surface mount assembly with a compact square shape and very thin profile, making it ideal for space-constrained electronic designs.
BTS443PXT
BTS443PXT by Infineon is a MOS peripheral driver with 36V max supply voltage, 7.6A output peak current limit, and built-in protections. It is used for buffer or inverter-based interface ICs in applications requiring sink output current flow direction and fast turn-on/off times.
VN750PS-E
VN750PS-E by STMicroelectronics is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates within a supply voltage range of 5.5V to 36V and can handle a max output current of 2A. This small outline package is ideal for applications requiring source output current flow direction and quick turn-on/off times.
L293DN
L293DN by Texas Instruments is a peripheral driver with 2 functions, operating at 5V nominal voltage. It offers built-in transient and thermal protections, supporting a max supply voltage of 36V. Ideal for applications requiring source and sink output current flow direction in commercial temperature grade environments.
BTS70082EPAXUMA1
BTS70082EPAXUMA1 by Infineon Technologies is a peripheral driver with 14 terminals, built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 18V and has a turn-on time of 110us. This small outline package is ideal for automotive applications requiring high output peak current limits up to 7.5A.
BTS72004EPAXUMA1
BTS72004EPAXUMA1 by Infineon Technologies is a peripheral driver with a max supply voltage of 18V. It offers built-in protections against transient, over current, over voltage, and thermal issues. This compact driver, with dimensions of 4.9mm x 3.9mm x 1.15mm, is suitable for applications requiring true output polarity and a max output current of 0.004A.
DRV103U/2K5G4
DRV103U/2K5G4 by Texas Instruments is a peripheral driver with a max supply voltage of 32V and built-in protections for transient, over current, and thermal issues. It operates in a temperature range from -55°C to 125°C, making it suitable for military-grade applications. With a nominal output peak current limit of 3.5A, this buffer or inverter-based peripheral driver is ideal for various electronic systems requiring precise control.
L293DD
L293DD by STMicroelectronics is a peripheral driver with 2 functions, 20 terminals, and a max supply voltage of 36V. It features built-in thermal protection and offers true output polarity. Ideal for applications requiring source and sink current flow control in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTS141TCBUMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G3; Output Current Flow Direction: SINK;
BTS141TCXT
BTS141TCXT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 35A and turn-on time of 40us. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTS133TCBUMA1
Peripheral Drivers; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Nominal Output Peak Current Limit: 7 A;
BTS117BKSA1
BTS117BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has 3 terminals, a nominal output peak current limit of 25A, and turn-on time of 70 us. This rectangular package style flange mount device is ideal for applications requiring sink output current flow direction.
BTS141BKSA1
BTS141BKSA1 by Infineon is a MOS technology peripheral driver with 12V nominal voltage and 12A output peak current limit. It offers overcurrent, overvoltage, and thermal protections, making it ideal for applications requiring sink output current flow direction in automotive systems. The package style is flange mount with a rectangular shape and single terminal position.
BTS134DATMA1
BTS134DATMA1 by Infineon Technologies is a peripheral driver with a small outline package shape and gull wing terminal form. It offers built-in protections against transient, over current, over voltage, and thermal issues. With a nominal voltage of 12V and a max output peak current limit of 24A, it is suitable for applications requiring buffer or inverter based interface ICs.
BTS133BKSA1
BTS133BKSA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for over current, over voltage, and thermal issues. It has a nominal output peak current limit of 28A and a turn-on time of 100µs. This rectangular package style device is ideal for applications requiring sink output current flow direction in automotive systems.
BTS142DATMA1
BTS142DATMA1 by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, over voltage, and thermal issues. It has a nominal voltage of 12V and a nominal output peak current limit of 45A. This small outline package driver is ideal for applications requiring sink output current flow direction.
BTS117TCXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 3; Package Code: TO-263; Package Shape: RECTANGULAR; Width: 9.25 mm;
BTS134DXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Turn-off Time: 100 us;
BTS133TCXT
BTS133TCXT by Infineon Technologies is a MOS technology peripheral driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 7A and turn-on time of 100us. This small outline package is ideal for applications requiring sink output current flow direction in a compact form factor.
BTS134D
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Terminal Finish: TIN;
Siemens
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G2; No. of Functions: 1;
BTS141E3045ANTMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Power Supplies (V): 12;
BTS142DXT
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Turn-on Time: 120 us;
BTS117E3045A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Shape: RECTANGULAR; Qualification: Not Qualified; Technology: MOS;
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; Package Equivalence Code: SMSIP3H,.55TB;
BTS141E3045A
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-263; Package Shape: RECTANGULAR; JESD-30 Code: R-PSSO-G2;
BTS118DATMA1
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 2; Package Code: TO-252; Package Shape: RECTANGULAR; Length: 6.5 mm;
BTS149
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 3; Package Shape: RECTANGULAR; Input Characteristics: SCHMITT TRIGGER; Terminal Position: SINGLE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved