Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TPIC6595DWR by Texas Instruments is a SIPO-based peripheral driver with 8 channels, each capable of sinking up to 0.5A current. It operates b/w -40°C to 125°C and has built-in transient protection. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.
Median Price
$3.147
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$2.270
100+ parts
$1.989
1k+ parts
$1.124
10k+ parts
-
Chip1Stop
$3.024
$1.834
$1.441
Arrow
$3.270
$1.988
$1.783
DigiKey
$3.310
$2.054
$1.978
$1.746
Mouser Electronics
$2.060
$1.910
$1.740
Verical
Nova Conductors
$1.686
Digiode
$2.156
Maritex
$3.543
$2.159
$1.721
Chip Stock
Vyrian
Prism Electronics
Bristol Electronics
Semtec, LLC
Continental Prestige Electronics
$1.652
Argo Parts USA
Advanced Electronics
$1.720
Semicontronic
$1.840
$1.794
$1.785
Ampacity Inc.
Corphita
$2.043
Parana Technologies
$7.907
$8.464
IDEA Electronic Components Group
$8.884
$8.440
$7.996
ChromeModa Solutions
$7.285
Corohmni
$14.543
Authorized Procurement Solutions
Lixinc
A-Z Elektronik GmbH
Kepictronics
S.R.D Solutions
DigiPath Technology Company
$8.010
Netroflash
$1.602
$1.568
Robosynatics
Lucentia Tech
The use of plastic/epoxy material ensures durability and protection for the internal components of the peripheral driver.
Allows for easy and efficient installation on circuit boards, saving time and effort during assembly.
Can handle a wide range of supply voltages, making it versatile for different applications.
The transient protection feature safeguards the peripheral driver from sudden voltage spikes, enhancing its reliability.
The open-drain output allows for flexibility in connecting to other components, increasing compatibility and ease of use.
Suitable for automotive applications, where temperature fluctuations are common, ensuring consistent performance in challenging environments.
The Schmitt trigger input helps in filtering out noise and providing a clean signal to the peripheral driver, improving overall system reliability.
Utilizing a SIPO (Serial Input, Parallel Output) based interface simplifies data communication and control, enhancing efficiency in data transfer.
Peripheral Drivers TPIC6595DWR attributes and parameters. Explore more Peripheral Drivers devices from Texas Instruments
Built-in Protections:
Driver No. of Bits:
Input Characteristics:
Interface IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Characteristics:
Output Current Flow Direction:
Maximum Output Current:
Nominal Output Peak Current Limit:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Turn-off Time:
Turn-on Time:
Width:
TPIC6595DWR Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Design 25/Feb/2022 TPIC6x 14/Oct/2022
PCN Assembly/Origin - Mult Dev 30/Oct/2019
Texas Instruments Inc. (TI) is one of the world's leading semiconductor companies and a global leader in analog and digital signal processing technology. The company has had a major impact on the electronics industry for over 80 years, manufacturing integrated circuits (ICs), software and subsystems that leverage high-performance computing capabilities. It offers an extensive portfolio of solutions for a wide range of industries, from aerospace to medical devices and consumer products to communication systems. Over its long history, TI has become synonymous with quality, reliability and innovation. Today, TI is one of the largest semiconductor companies in the world with operations in more than 30 countries across six continents.
President, CEO
Haviv Ilan
Chairman
Richard K. Templeton
Senior VP, CFO
Rafael R. Lizardi
M - Fab
Fabrication
Fab Initiation
1997
USA
South Portland
Wafer Capacity
32,000
D - FAB
1966
Dallas
42,000
D MOS - 6
2002
25,000
D MOS - 5
1995
75,000
Miho - 8
1980
Japan
Inashiki
43,000
S FAB 1
Sherman
91,000
F - FAB
2001
Germany
Freising
37,000
R Fab 1
2010
Richardson
40,000
D HC Line
1999
2,000
JV3
Aizu Wakamatsu
45,000
C - FAB
2007
China
Chengdu
30,000
L - Fab
2015
Lehi
70,000
R - Fab 2
2022
S - FAB 2
2025
S - FAB 3
2028
BAV99
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Diotec Semiconductor Ag
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
Crimson Semiconductor
1554216002
Molex
WIRE AND CABLE;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Yangzhou Yangjie Electronics
ITS428L2XT
Infineon Technologies
ITS428L2XT by Infineon Technologies is a peripheral driver with a max supply voltage of 43V. It offers built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This small outline package is suitable for applications requiring buffer or inverter based interface ICs with a nominal output peak current limit of 1.8A.
L293DD013TR
L293DD013TR by STMicroelectronics is a 20-terminal peripheral driver with a max supply voltage of 36V. It features built-in thermal protection and offers a nominal output peak current limit of 1.2A. Ideal for applications requiring source and sink output current flow direction, such as buffer or inverter-based interface ICs.
TBD62083AFNG(Z.EL)
Toshiba
The TBD62083AFNG(Z.EL) by Toshiba is a peripheral driver with 8 functions. It has a maximum supply voltage of 25V and a minimum supply voltage of 2.5V. The package style is small outline, low profile, shrink pitch. It can handle a maximum operating temperature of 85°C and a minimum operating temperature of -40°C. Its width is 4.4mm and its length is 6.5mm. The TBD62083AFNG(Z.EL) is an industrial-grade BCDMOS technology device with a nominal supply voltage of 5V. Its interface IC type is buffer or inverter based peripheral driver, and it has a sink output current flow direction.
ADUM4223ARWZ
Analog Devices
ADUM4223ARWZ by Analog Devices is a Peripheral Driver with 2 functions, operating at 3-5.5V. It offers thermal and under voltage protection, suitable for automotive applications. This small outline package has 16 terminals, Gull Wing form, and supports up to 4A output peak current limit.
VNB14NV04TR-E
VNB14NV04TR-E by STMicroelectronics is a Peripheral Driver with built-in protections for transient, over current, and over voltage. It has a nominal output peak current limit of 18A and turn-on time of 4.5us. This small outline package driver is ideal for applications requiring sink output current flow direction.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
BTS711L1XT
BTS711L1XT by Infineon Technologies is a peripheral driver with a max supply voltage of 34V. It has built-in protections for transient, over current, over voltage, thermal, and under voltage conditions. This MOS technology-based device is suitable for applications requiring buffer or inverter based peripheral drivers.
IPS160HTR
STMicroelectronics' IPS160HTR is a 12-terminal peripheral driver with 2.5A output current, suitable for various applications. It operates on 8-36V power supplies and features a small outline package style. The interface IC type is buffer or inverter based, making it ideal for electronic systems requiring high-current drive capabilities.
L293DNE
L293DNE by Texas Instruments is a 16-terminal peripheral driver with a max supply voltage of 36V. It features built-in transient and thermal protections, output current flow in both source and sink directions, and a turn-on time of 0.4us. Ideal for applications requiring precise control of motors or actuators in commercial temperature environments.
MIC2076-1YM
Micrel
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
VNS3NV04D
VNS3NV04D by STMicroelectronics is a Peripheral Driver with 2 functions, offering built-in protections for transient, over current, and over voltage. With a max output peak current limit of 5A, it is ideal for applications requiring buffer or inverter based peripheral drivers. The small outline package style with gull wing terminals makes it suitable for compact designs.
BTS640S2GATMA1
BTS640S2GATMA1 by Infineon is a MOS technology peripheral driver with 6 terminals. It offers built-in protections for over current, over voltage, thermal, and under voltage. With a max supply voltage of 34V and nominal output peak current limit of 19A, it's ideal for applications requiring buffer or inverter based peripheral drivers.
ISP772TFUMA1
ISP772TFUMA1 by Infineon Technologies is a Peripheral Driver with 8 terminals, offering built-in protections against transient, over current, and over voltage. It operates b/w -30 to 85 °C with a supply voltage range of 5-34 V. Ideal for applications requiring buffer or inverter based peripheral drivers.
ULN-2004A
Sprague Electric
Sprague Electric's ULN-2004A is a 16-terminal peripheral driver with max output current of 0.35A and nominal voltage of 50V. It operates in commercial temperature range, making it ideal for various applications requiring bipolar technology and through-hole terminal form.
VNH5180ATR-E
VNH5180ATR-E by STMicroelectronics is a HALF BRIDGE BASED PERIPHERAL DRIVER with Matte Tin finish. It has a max reflow temp of 260°C and MSL level of 3. Ideal for applications requiring SINK output current flow direction in SMALL OUTLINE package.
BTS4141NNT
BTS4141NNT by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates b/w -40 to 125 °C and has a max supply voltage of 45 V. Ideal for automotive applications due to its small outline package style and sink output current flow direction.
ULN-2068B
Peripheral Drivers; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MIC5841YN
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BSP752R
BSP752R by Infineon Technologies is a peripheral driver with built-in protections for transient, over current, and over voltage. It operates at supply voltages ranging from 6V to 52V and has a max output current of 1.3A. This MOS technology-based device is ideal for applications requiring buffer or inverter based peripheral drivers in automotive systems.
VN7003AHTR
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Peak Reflow Temperature (C): NOT SPECIFIED; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS160PT801ACBR
DS160PT801ACBR by Texas Instruments is a bus controller IC with 339 terminals, operating at -40 to 85°C. It supports PCI bus compatibility with a data transfer rate of 2000 MBps. This CMOS technology device has a thin profile and fine pitch package suitable for industrial applications.
UCC27284DRCR
UCC27284DRCR by Texas Instruments is a MOSFET gate driver with 2 channels, capable of handling a max output current of 3.5A. It operates in automotive-grade temperatures (-40 to 125°C) and has a turn-on/off time of 30µs. This chip carrier package with very thin profile is suitable for high side driver applications requiring fast switching speeds.
DRV3255EPAPRQ1
DRV3255EPAPRQ1 by Texas Instruments is a Motion Control IC with 64 terminals, operating at -40 to 150°C. It is an AEC-Q100 compliant automotive-grade IC for Brushless DC Motor control, supporting supply voltages from 5V to 90V and output currents up to 3.5A. The package style includes a flatpack with heat sink/slug, suitable for surface mount applications in automotive systems.
TPS7A4301DGQR
TPS7A4301DGQR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 14.5V and a dropout voltage of 0.6V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
DRV8316RRGFR
DRV8316RRGFR by Texas Instruments is a motion control IC with a rectangular package and a terminal form of gull wing. It has a max output current of 8A and can operate at temperatures ranging from -40 to 125°C. This IC is commonly used as a brushless DC motor controller in automotive applications.
LMR43610MSC3RPERQ1
LMR43610MSC3RPERQ1 by Texas Instruments is a 9-terminal switching regulator with a max output voltage of 32V and max output current of 1A. Ideal for automotive applications, it operates b/w -40 to 150°C, featuring a buck switcher config and PWM control mode at up to 2200kHz frequency.
CC2662R1FTWRGZRQ1
CC2662R1FTWRGZRQ1 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU, 48 MHz clock frequency, and 81920 bytes of RAM. Ideal for industrial applications, it features 8 ADC channels, 32 DMA channels, and peripherals like AES and PWM for efficient system integration.
TPIC6B595DWRG4
TPIC6B595DWRG4 by Texas Instruments is an 8-bit register-based peripheral driver with a max supply voltage of 5.5V and output current flow direction as sink. It has built-in transient protections, operates in automotive temperature grade range (-40 to 125 °C), and is ideal for applications requiring open-drain output characteristics.
TPIC6B595DWR
REGISTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
TPIC6595DWRG4
TPIC6595DWRG4 by Texas Instruments is an SIPO-based peripheral driver with 8 functions, 5V nominal voltage, and 0.5A max output current. It is designed for automotive applications, featuring built-in transient protections and operating temperature range of -40 to 125°C.
TPIC6B595DWG4
TPIC6B595DWG4 by Texas Instruments is a register-based peripheral driver with 8 bits. It has a max supply voltage of 5.5V and can handle a max output current of 0.15A. Ideal for automotive applications due to its built-in transient protections and small outline package style.
TPIC6B595DW
TPIC6B595DW by Texas Instruments is an 8-bit register-based peripheral driver with sink output current flow direction. It operates b/w -40 to 125 °C and has a max supply voltage of 5.5 V, making it suitable for automotive applications requiring transient protection and standard input characteristics.
TPIC6273DWRG4
TPIC6273DWRG4 by Texas Instruments is a latch-based peripheral driver with 8 channels, 2A output peak current limit, and inverted output polarity. It operates in automotive-grade temperatures (-40 to 125°C) and has built-in transient protections. Ideal for applications requiring open-drain outputs such as automotive electronics.
TPIC6B595N
REGISTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
TPIC6273DWG4
LATCH BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
TPIC6273DWR
TPIC6273DW
TPIC6595N
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
TPIC2801KV
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Output Characteristics: OPEN-COLLECTOR;
TPIC2406NE-00
LATCH BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
TPIC2801KV-00
SIPO BASED PERIPHERAL DRIVER; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; No. of Functions: 8; Terminal Position: ZIG-ZAG;
TPIC2802KV
SIPO BASED PERIPHERAL DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Package Equivalence Code: SIP15,.1;
TPIC2404KN-00
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Shape: RECTANGULAR; Maximum Operating Temperature: 125 Cel;
TPIC2406NE-10
TPIC4209KV
Peripheral Drivers; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR;
TPIC2603DW
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved