Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSBF3CH60B by Onsemi is a Motion Control IC with 27 terminals, operating voltage range of 13.5V to 16.5V. It features AC Motor Controller technology in a compact MICROELECTRONIC ASSEMBLY package (44mm x 20mm x 7mm), suitable for various motion control applications.
Median Price
$11.525
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$9.220
1k+ parts
$8.250
10k+ parts
$7.760
DigiKey
$12.130
Verical
$10.313
$9.700
Digiode
$9.747
Vyrian
Chip Stock
DigiKey Marketplace
Corphita
$9.234
Corohmni
$10.260
Microchip USA
$27.580
Native Components
$88.339
$84.806
Northwest PG Solutions
$97.173
QUARKTWIN TECHNOLOGY LTD
Problanco Electronics
Kulean Microsystems
TANS Electronics
Supply Digital
SupplyDigital Components
UHIMA Technologies
Rectangular package shape allows for easy handling and mounting in various applications.
Suitable voltage supply for efficient operation of the motion control IC, providing optimal performance.
Sufficient number of terminals for connectivity and integration with other system components.
Microelectronic assembly package style ensures compact size and high reliability for the IC.
Low seated height allows for easier placement and installation in confined spaces or compact devices.
Compact width dimension enables the motion control IC to be used in space-constrained applications.
Specifically designed for AC motor control applications, ensuring compatibility and optimized performance.
Low minimum supply voltage requirement enables operation in a wide range of power supply scenarios.
Moderate length dimension provides room for necessary components and connections without being excessively large.
Hybrid technology offers a balance of performance and efficiency for the motion control IC.
Through-hole terminal form facilitates easy soldering and robust connections for reliable operation.
High maximum supply voltage tolerance ensures stability and protection against overvoltage conditions.
Motion Control ICs FSBF3CH60B attributes and parameters. Explore more Motion Control ICs devices from Onsemi
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Terminal Form:
Terminal Position:
Width (mm):
FSBF3CH60B Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT2907ALT1G
Onsemi
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LAN8720A-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: OTHER; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Itt Semiconductor
SS14
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
LM629N-6/NOPB
LM629N-6/NOPB by Texas Instruments is a Motion Control IC with 28 terminals, operating at 5V. It features a rectangular package style and NMOS technology, suitable for brush DC motor control applications. With an industrial temperature grade range of -40 to 85°C, it offers precise control in various environments.
FNB41560
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 26; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE; Qualification: Not Qualified;
FNB34060T6
FNB34060T6 by Onsemi is a Motion Control IC with 27 terminals, operating b/w -40 to 125°C. It features a nominal voltage of 15V and max supply current of 6mA. Ideal for automotive applications as a Brushless DC Motor Controller in a rectangular package style.
VNH3SP3013TR
VNH3SP3013TR by STMicroelectronics is a Motion Control IC with 30 terminals, operating at power supplies of 9-18V. It features a small outline package shape and gull wing terminal form, suitable for applications requiring precise motion control in compact spaces.
DRV2603RUNR
DRV2603RUNR by Texas Instruments is a Motion Control IC with 10 terminals, operating voltage range of 2.5V to 5.2V, and peak reflow temperature of 260°C. Ideal for brush DC motor control applications due to its compact square package shape and very thin profile chip carrier style. Operating in industrial temperatures from -40°C to 85°C, it offers precise vibration feedback control.
DRV8835DSSR
DRV8835DSSR by Texas Instruments is a motion control IC with 12 terminals, operating voltage of 3-5V, and max output current of 1.5A. Ideal for brush DC motor control applications, it has a small outline package shape and can operate in industrial temperature range from -40 to 85°C.
DRV8353HRTAT
DRV8353HRTAT by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au.
MP6513GJ-Z
Monolithic Power Systems
MP6513GJ-Z by Monolithic Power Systems is a Motion Control IC with 6 terminals, operating voltage range of 2.5V to 21V, and temperature range from -40°C to 125°C. It is designed for stepper motor control applications in automotive systems due to its small outline package and surface-mount capability.
FSBB20CH60CL
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): FLANGE MOUNT;
PDRV8847SPWR
STEPPER MOTOR CONTROLLER;
DRV8316TRGFR
DRV8316TRGFR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for automotive applications due to its high temp grade and compact size (7mm x 5mm).
SLA7026M
Allegro MicroSystems
Allegro MicroSystems' SLA7026M is a Motion Control IC with 24V supply voltage, 5A output current, and -20 to 85°C operating temperature range. Ideal for stepper motor control applications, it features a hybrid technology, 18 terminals in zig-zag position, and matte tin finish on through-hole terminals.
DRV8838DSGT
DRV8838DSGT by Texas Instruments is a Motion Control IC with 1.8A max output current, suitable for brush DC motor control applications. It operates b/w -40 to 85°C, with a supply voltage range of 1.8V to 7V. This small outline IC has a dual terminal position and nickel/palladium/gold finish.
LV8413GP-H
LV8413GP-H by Onsemi is a Motion Control IC in a square chip carrier package. Operates at -30 to 85°C with power supplies of 3.3V and 5V. Features BICMOS technology, suitable for applications requiring precise motion control in compact designs.
TC646BEOA
Microchip TC646BEOA is a Motion Control IC with 8 terminals, operating voltage of 3-5V, and temp range -40 to 85°C. Ideal for Brushless DC Motor control applications due to its small outline package and industrial temperature grade suitability. Features include dual terminal position, matte tin finish, and low supply current of 0.4mA.
DRV8312DDW
Texas Instruments DRV8312DDW is a Motion Control IC with 44 terminals, operating voltage of 12-50V. It features a max output current of 6.5A and operates in industrial temperature range (-40 to 85°C). Ideal for brush DC motor control applications due to its compact size and high supply voltage tolerance.
UC2625DWG4
UC2625DWG4 by Texas Instruments is a Motion Control IC with 12V nominal voltage, 2A max output current, and 30mA max supply current. It's a Brushless DC Motor Controller in small outline package for industrial applications requiring precise motion control.
DRV8301QDCARQ1
DRV8301QDCARQ1 by Texas Instruments is a Motion Control IC with 56 terminals, operating voltage range of 6-60V, and temp. range of -40 to 125°C. Ideal for automotive applications, it's a BLDC motor controller in a small outline package suitable for surface mount assembly.
FAM65V05DF1
Littelfuse
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 44 mm; Technology: HYBRID;
DRV8353HRTAR
DRV8353HRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 9-75V, and max output current of 1A. It is ideal for automotive applications due to its temp grade and brushless DC motor controller type. The IC features a compact square package shape with surface mount capability for easy integration.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSBF15CH60BTL
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Operating Temperature: -40 Cel;
FSBF10CH60B
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Supply Voltage (Vsup): 16.5 V;
FSBF10CH60BT
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Nominal Supply Voltage (Vsup): 15 V;
FSBF10CH60BTL
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Output Current: 20 A;
FSBF15CH60BT
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Minimum Supply Voltage (Vsup): 13.5 V;
FSBF15CH60BT-F166
AC MOTOR CONTROLLER;
FSBF15CH60CT
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XDFM-T27; Maximum Supply Voltage (Vsup): 400 V;
FSBF5CH60B
Onsemi's FSBF5CH60B is a Motion Control IC with 27 terminals, operating b/w -40 to 125°C. It supports AC motor control, offering a max output current of 10A at supply voltages ranging from 13.5V to 16.5V. Ideal for automotive applications due to its robust design and high-temperature grade suitability.
FSBF15CH60BTS
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Length: 44 mm; Additional Features: SEATED HGT-NOM;
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Package Body Material: UNSPECIFIED;
FSBF3CH60B
AC MOTOR CONTROLLER; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Supply Voltage (Vsup): 16.5 V; Package Body Material: UNSPECIFIED;
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; Maximum Operating Temperature: 125 Cel;
AC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 27; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-XDMA-T27;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved