Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSA1208BQX by Onsemi is a CMOS SPST switch with 20 terminals, operating b/w -40 to 85°C. It has a supply voltage range of 2.5-4V and can handle peak reflow temperatures up to 260°C. This chip carrier is ideal for industrial applications requiring separate output switching at a very thin profile.
Median Price
$0.922
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.849
1k+ parts
$0.705
10k+ parts
$0.628
DigiKey
$1.060
Verical
$0.822
Flip Electronics (Authorized)
Digiode
$0.693
DigiKey Marketplace
Vyrian
Flip Electronics
Chip Stock
ACDS - Activité Composants Distribution Service
Nova Conductors
SPM Sales
Semicontronic
$0.620
$0.604
$0.601
Ampacity Inc.
Corphita
$0.656
Corohmni
$0.729
Aztec Data Supply Inc.
$20.397
Perfect Parts
Metaverse IC Inc.
Cyclops Electronics Ltd (Excess)
QUARKTWIN TECHNOLOGY LTD
Lixinc
Problanco Electronics
Microchip USA
A-Z Elektronik GmbH
Kulean Microsystems
Alle Elektronik GmbH
Argo Parts USA
TANS Electronics
Authorized Procurement Solutions
Continental Prestige Electronics
Kepictronics
Bastille Electronics
Supply Digital
UHIMA Technologies
SupplyDigital Components
PLASTIC/EPOXY material provides good thermal and electrical insulation, making the product durable and reliable.
Surface mount capability allows for easy and efficient assembly onto circuit boards, saving time and effort in production.
Low nominal supply voltage of 2.3V helps in reducing power consumption and improving energy efficiency.
With a high maximum operating temperature of 85 °C, this product can withstand elevated heat conditions, ensuring reliability in various environments.
CMOS technology offers low power consumption and high noise immunity, resulting in improved performance and efficiency of the product.
Multiplexers & Switches FSA1208BQX attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output (V):
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Nominal Supply Voltage (Vsup):
Surface Mount:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSA1208BQX Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
1N4148
Multicomp Pro
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Config: SINGLE; No. of Phases: 1; No. of Elements: 1;
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
DP83848IVVX/NOPB
National Semiconductor
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: QFP; Package Shape: SQUARE;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
TS5A23157RSERG4
TS5A23157RSERG4 by Texas Instruments is a 2-function SPDT switch with 140 ohm Ron, suitable for industrial applications. Operating at -40 to 85 °C, it has a 0.6 mm seated height and offers 60 dB isolation. With a terminal pitch of 0.5 mm and package style of CHIP CARRIER, it's ideal for compact designs requiring fast switching times.
ADG5419BRMZ
Analog Devices
ADG5419BRMZ by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 15 ohm. Operating at temperatures from -40 to 125 °C, it has a switching voltage range of +-9/+-22/9/40 V. Ideal for automotive applications due to its CMOS technology and compact design.
DG419DY+
Analog Devices' DG419DY+ is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm and switching voltage of +-15V. Ideal for industrial applications, it operates b/w -40 to 85°C, has a peak reflow temp of 260°C, and offers break-before-make switching.
SN74LV4051ARGYR
SN74LV4051ARGYR by Texas Instruments is a CMOS multiplexer with 16 terminals, operating at temperatures from -40 to 85°C. It has a max supply voltage of 5.5V and on-state resistance of 225 ohm, suitable for industrial applications requiring high-speed switching up to 35 kHz. The chip carrier package style with very thin profile makes it ideal for space-constrained designs needing separate outputs and low power consumption.
DG508ACJ
Vishay Intertechnology's DG508ACJ is an 8-channel CMOS multiplexer with a max on-state resistance of 450 ohm and max switch-on time of 1500 ns. It operates at temperatures b/w 0 to 70 °C and has a supply current of up to 2.4 mA. Ideal for applications requiring high-speed signal switching in commercial-grade environments.
DG412DY+
Maxim Integrated
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NC7SZ66M5X_NL
Fairchild Semiconductor
NC7SZ66M5X_NL by Fairchild Semiconductor is a CMOS SPST switch with 5 terminals, operating at temperatures from -40 to 85°C. It has a low profile rectangular package with matte tin finish and shrink pitch style. With a max on-state resistance of 30 ohms and fast switching times of 7-9 ns, it is ideal for industrial applications requiring high-speed signal multiplexing.
TMUX7213PWR
TMUX7213PWR by Texas Instruments is a 4-channel CMOS multiplexer with a max supply voltage of 22V. It has a nominal bandwidth of 48kHz and offers separate outputs. This automotive-grade device is suitable for applications requiring high-speed switching and low on-state resistance.
ADG508AKRZ-REEL7
ADG508AKRZ-REEL7 by Analog Devices is a CMOS multiplexer with 8 channels, 450 ohm max Ron, and 300 ns switch-on/off time. It operates in industrial temperature range (-40 to 85 °C) and is ideal for signal routing applications requiring high isolation (68 dB) and low on-state resistance match (22.5 ohm).
ADG1208YRUZ-REEL7
ADG1208YRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of ±16.5V and has a max on-state resistance of 200 ohm. With a temperature grade of automotive, it is suitable for applications requiring high-speed switching in harsh environments.
CD4052BPWRG3
CD4052BPWRG3 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at -55 to 125°C. It has a max on-state resistance of 1050 ohm and a nominal bandwidth of 25 kHz. Ideal for military-grade applications requiring separate outputs and low signal current consumption.
DG411DY-E3
Vishay Intertechnology's DG411DY-E3 is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 220 ns switch-on time. Ideal for industrial applications, it operates b/w -40 to 85°C with a peak reflow temperature of 260°C. This small outline package has separate outputs and offers 68 dB isolation at ±15 V supplies.
TS3USB221RSERG4
TS3USB221RSERG4 by Texas Instruments is a 1-channel differential multiplexer with 2.5V nominal voltage, 1100 kHz nominal bandwidth, and 40 dB off-state isolation. It is ideal for industrial applications requiring fast switching times (50 ns on, 23 ns off) in a compact chip carrier package with very thin profile.
TS5A3166DBVRE4
TS5A3166DBVRE4 by Texas Instruments is a SPST switch with 1.8/5 V supplies, 3.4 ohm Ron, and 200 kHz bandwidth. It is ideal for industrial applications requiring low-profile switches with separate outputs and high off-state isolation. The switch operates b/w -40 to 85 °C and has a compact design suitable for surface mount PCBs.
NCP45524IMNTWG-H
NCP45524IMNTWG-H by Onsemi is an 8-terminal SPST switch with a max on-state resistance of 0.0317 ohm and operates at a nominal voltage of 3.3V. This small outline, heat sink package is ideal for industrial applications requiring low power consumption and precise switching capabilities.
74HC4052D
NXP Semiconductors
NXP Semiconductors' 74HC4052D is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125 °C and has a max on-state resistance of 195 ohm. With a small outline package, it's ideal for automotive applications requiring fast switching times and high isolation levels.
ADG1409YRUZ-REEL7
ADG1409YRUZ-REEL7 by Analog Devices is a CMOS differential multiplexer with 4 channels. It operates at a supply voltage range of 4.5V to 5.5V and offers a max on-state resistance of 9 ohm. With automotive temperature grade, it is suitable for applications requiring fast switching times in compact designs.
MAX14662ETI+T
MAX14662ETI+T by Analog Devices is a 28-terminal SPST switch with 1 ohm Ron, 0.02 ohm resistance match, and 40 dB isolation. It operates b/w -40 to 85 °C, ideal for industrial applications requiring high-speed switching in a compact square package.
CD4052BPWRG4
CD4052BPWRG4 by Texas Instruments is a CMOS differential multiplexer with 2 channels, operating at temperatures from -55 to 125 °C. It has a max on-state resistance of 1050 ohm and a nominal bandwidth of 25 kHz. Ideal for military-grade applications requiring high isolation and low signal current consumption.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA1156P6X
FSA1156P6X by Onsemi is a SPST multiplexer with 2.7V nominal voltage, 1.65V min supply voltage, and 5.5V max supply voltage. It features a max on-state resistance of 2.1 ohm and a max switch-on time of 40ns, making it ideal for industrial applications requiring fast switching capabilities in compact designs.
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1153UCX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6X
FSA1156L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1208BQX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6
FSA1157L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UMX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1256AL8X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VBCC; Package Shape: SQUARE; Surface Mount: YES;
FSA1256L8X
FSA1257AL8X
FSA110UMX
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1257L8X
FSA1257L8X by Onsemi is a CMOS SPST switch with 2 functions, 8 terminals, and a max on-state resistance of 4 ohm. It operates at industrial temperature grades with a supply voltage range of 1.65V to 5.5V, making it suitable for various multiplexing and switching applications in electronics.
FSA110K8X
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UDMX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved