Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$0.412
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.364
1k+ parts
$0.334
10k+ parts
-
Mouser Electronics
$0.500
$0.431
$0.371
$0.356
Rochester
$0.463
$0.385
$0.343
Verical
$0.404
Avnet
Flip Electronics (Authorized)
Chip1Stop
$0.338
$0.315
Digiode
$0.361
Nova Conductors
$0.388
NAC Semi
$0.645
Vyrian
Rebound Electronics
ECAB
Flip Electronics
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Bristol Electronics
$0.662
$0.459
Cyclops Electronics Ltd
Semicontronic
$0.287
$0.280
$0.278
Ampacity Inc.
Corohmni
Corphita
$0.342
Argo Parts USA
$0.377
Continental Prestige Electronics
$0.381
Aztec Data Supply Inc.
$2.786
Perfect Parts
Kulean Microsystems
SupplyDigital Components
TANS Electronics
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Problanco Electronics
A-Z Elektronik GmbH
Microchip USA
Alle Elektronik GmbH
Assy Fe
Netroflash
$0.369
Supply Digital
Kepictronics
UHIMA Technologies
Multiplexers & Switches FSA1156L6X attributes and parameters. Explore more Multiplexers & Switches devices from Fairchild Semiconductor
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSA1156L6X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
In 2016 Fairchild was acquired by ON Semiconductor (after 2022, onsemi). Fairchild Semiconductor International, Inc. was an American semiconductor company based in San Jose, California. Founded in 1957 as a division of Fairchild Camera and Instrument, it became a pioneer in the manufacturing of transistors and of integrated circuits. Schlumberger bought the firm in 1979 and sold it to National Semiconductor in 1987; Fairchild was spun off as an independent company again in 1997. In September 2016, Fairchild was acquired by ON Semiconductor. The company had locations in the United States at San Jose, California; San Rafael, California; South Portland, Maine; West Jordan, Utah; and Mountaintop, Pennsylvania. Outside the US it operated locations in Australia;[4] Singapore; Bucheon, South Korea; Penang, Malaysia; Suzhou, China; and Cebu, Philippines, among others.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Panjit International
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
Semicoa
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
ADG601BRTZ-REEL7
ADG601BRTZ-REEL7 by Analog Devices is a SPST switch with 6 terminals, operating at -40 to 85 °C. It has a max on-state resistance of 2.5 ohm and switching type BREAK-BEFORE-MAKE. Ideal for industrial applications requiring low-profile, small-outline switches with high isolation levels.
DG408DY
Renesas Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MAX399EEE+
Maxim Integrated
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LV4051ARGYR
SN74LV4051ARGYR by Texas Instruments is a CMOS multiplexer with 16 terminals, operating at temperatures from -40 to 85°C. It has a max supply voltage of 5.5V and on-state resistance of 225 ohm, suitable for industrial applications requiring high-speed switching up to 35 kHz. The chip carrier package style with very thin profile makes it ideal for space-constrained designs needing separate outputs and low power consumption.
74HC4051BQ,115
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
DG408DYZ
DG408DYZ by Renesas Electronics is an 8-channel CMOS multiplexer with a max supply voltage of 20V. It features a small outline package, matte tin terminal finish, and industrial temperature grade. With a nominal off-state isolation of 75dB and on-state resistance match of 15 ohm, it is ideal for industrial applications requiring precise signal routing in harsh environments.
AD8174ARZ
AD8174ARZ by Analog Devices is a 4-channel VIDEO MULTIPLEXER with 17 ns max switch-on time. It operates at -40 to 85 °C, with +-5 V power supplies and 13 mA max supply current. Ideal for industrial applications requiring fast signal switching in a compact SMALL OUTLINE package.
TC4066BP(N,F)
Toshiba
SPST;
ADG1208YRUZ
ADG1208YRUZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a max supply voltage of +/-16.5V and has a max on-state resistance of 200 ohm. With automotive temperature grade, it is ideal for applications requiring high-speed switching and low power consumption.
ADG408BRZ-REEL
ADG408BRZ-REEL by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 100 ohm and break-before-make switching. It operates at a nominal voltage of +/-15V, has a package style of small outline, and is ideal for industrial temperature grade applications.
CD4052BE
Rca Solid State
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
74HC4051D
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74LVC1G66GW
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG508AKRZ-REEL7
Rochester Electronics
DG419DY
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
7705201EC
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG708BRUZ
ADG708BRUZ by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at a nominal voltage of 2.5V and has a max on-state resistance of 4.5 ohm. Ideal for automotive applications, it features a small outline package with dual terminals and common output configuration.
DG508ACJ
Temic Semiconductors
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Shape: RECTANGULAR; Surface Mount: NO; JESD-30 Code: R-PDIP-T16;
DG445DJ-E3
Vishay Intertechnology's DG445DJ-E3 is a CMOS SPST switch with 4 functions, -40 to 85°C operating temp, and 15V supply voltage. With 16 terminals in an IN-LINE package, it offers separate output at 85 ohm resistance. Ideal for industrial applications requiring high isolation and fast switching times.
CD74HC4051E
CD74HC4051E by Texas Instruments is a CMOS single-ended multiplexer with 16 terminals. It operates at temperatures from -55 to 125°C and has a max on-state resistance of 270 ohm. Ideal for applications requiring common output switching with a bandwidth of 200 kHz, it offers break-before-make switching and high off-state isolation of 73 dB.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA1156P6X
FSA1156P6X by Onsemi is a SPST multiplexer with 2.7V nominal voltage, 1.65V min supply voltage, and 5.5V max supply voltage. It features a max on-state resistance of 2.1 ohm and a max switch-on time of 40ns, making it ideal for industrial applications requiring fast switching capabilities in compact designs.
Fairchild Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1153UCX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6X
FSA1156L6X
FSA1208BQX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6
FSA1157L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UMX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1256AL8X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VBCC; Package Shape: SQUARE; Surface Mount: YES;
FSA1256L8X
FSA1257AL8X
FSA110UMX
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1257L8X
FSA1257L8X by Onsemi is a CMOS SPST switch with 2 functions, 8 terminals, and a max on-state resistance of 4 ohm. It operates at industrial temperature grades with a supply voltage range of 1.65V to 5.5V, making it suitable for various multiplexing and switching applications in electronics.
FSA110K8X
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UDMX
FSA1156P6
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved