Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSA1211UDMX by Onsemi is a 28-terminal SPST multiplexer with a max on-state resistance of 14 ohm. Operating in industrial temperature range (-40 to 85 °C), it offers nominal off-state isolation of 45 dB. Ideal for applications requiring fast switching times (45 ns on, 35 ns off) and low supply voltage (1.8-4.3 V).
Median Price
$1.262
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$1.220
1k+ parts
$1.010
10k+ parts
$0.903
DigiKey
$1.530
Verical
$1.129
Digiode
$0.947
Vyrian
$0.997
Corphita
$0.897
Corohmni
Andel Nordic
$3.186
$3.058
A-Z Elektronik GmbH
TANS Electronics
SupplyDigital Components
Authorized Procurement Solutions
Alle Elektronik GmbH
Problanco Electronics
Supply Digital
Kulean Microsystems
Northwest PG Solutions
Kepictronics
UHIMA Technologies
Native Components
Surface mount design makes it easy to integrate into compact electronic devices, saving space and simplifying assembly.
Operates efficiently at a voltage commonly used in many electronic systems, ensuring compatibility with existing setups.
Provides multiple terminals for connecting to various components, allowing for complex circuit configurations.
Can withstand high temperatures, making it suitable for industrial applications where heat may be a concern.
Compact width allows for tight placement on circuit boards, enabling dense packing of components.
Low resistance ensures minimal signal loss when the switch is in the on state, maintaining signal integrity.
Fast switching time enables quick response in changing signal paths, improving overall performance.
Industrial-grade temperature rating ensures reliable operation in harsh environmental conditions.
Provides strong isolation between the off-state terminals, reducing the risk of signal interference.
Multiplexers & Switches FSA1211UDMX attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
FSA1211UDMX Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
BAV99
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
TCA6424ARGJR
Texas Instruments
TCA6424ARGJR by Texas Instruments is a CMOS parallel I/O port with 24 bits and 3 ports. It operates b/w -40 to 85°C, suitable for industrial applications. With a max clock frequency of 0.4 MHz, it offers low power consumption at only 0.03 mA supply current.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Yangzhou Yangjie Electronics
First Components International
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Multicomp Pro
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
MBR1560CT
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
NCP45525IMNTWG-H
NCP45525IMNTWG-H by Onsemi is an 8-terminal SPST switch with a max on-state resistance of 0.0317 ohm. Operating b/w -40 to 85 °C, it has a supply voltage range of 3-5.5 V making it ideal for industrial applications requiring precise signal routing in compact spaces.
DG407DYZ-T
Renesas Electronics
Renesas Electronics DG407DYZ-T is an 8-channel differential multiplexer with a max on-state resistance of 100 ohm. It operates in industrial temperature range (-40 to 85 °C) and has a peak reflow temperature of 260 C. Suitable for various applications requiring precise signal switching in compact designs.
MAX14757EUE+T
Analog Devices
MAX14757EUE+T by Analog Devices is a 4-function multiplexer with 16 terminals, operating b/w -40 to 85°C. It features a BICMOS technology, matte tin terminal finish, and a max on-state resistance of 10 ohm. Ideal for industrial applications requiring precise signal switching in compact designs.
ADG708BRUZ-REEL7
ADG708BRUZ-REEL7 by Analog Devices is a CMOS single-ended multiplexer with 8 channels. It operates at -40 to 125 °C and has a max on-state resistance of 4.5 ohm. Ideal for automotive applications, it features a small outline package with dual terminals and common output voltage.
DG412DYZ-T
Renesas Electronics' DG412DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. Ideal for industrial applications requiring a small outline package, it operates b/w -40 to 85 °C with a supply voltage range of +/-5V to +/-15V.
PTMUX1574PWR
SPDT;
PCA9548AD,118
PCA9548AD,118 by NXP Semiconductors is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It features separate outputs, dual terminal position, and small outline package style for applications requiring signal routing in compact spaces at temperatures ranging from -40°C to 85°C.
FSA4476UCX
FSA4476UCX by Onsemi is a DPDT switch with 25 terminals in a square grid array package. It operates b/w -40 to 85°C, with a supply voltage range of 2.7V to 5.5V and offers 100dB isolation. Ideal for industrial applications requiring high-performance multiplexing and switching capabilities in compact designs.
FSA4157P6X
FSA4157P6X by Onsemi is a SPDT switch with 1.15 ohm Ron, 70 dB isolation, and 60 ns switch-on time. It operates in industrial temperature range and has a supply voltage of 1.65V to 5.5V. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
74HC4051D
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SN74LVC1G3157DRLR
SN74LVC1G3157DRLR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and fast switching times of 14 ns turn-on and 7.5 ns turn-off, making it ideal for industrial applications requiring precise signal routing in compact spaces.
SN74LVC1G3157DCKR
SN74LVC1G3157DCKR by Texas Instruments is a SPDT switch with 6 terminals, operating at a voltage range of 1.65V to 5.5V. It offers a max on-state resistance of 30 ohm and a bandwidth of 340 kHz, suitable for industrial applications requiring fast switching times and high isolation levels. The package style is small outline with thin profile, making it ideal for space-constrained designs.
DG419DY+
Analog Devices' DG419DY+ is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm and switching voltage of +-15V. Ideal for industrial applications, it operates b/w -40 to 85°C, has a peak reflow temp of 260°C, and offers break-before-make switching.
ADG1434YRUZ-REEL
ADG1434YRUZ-REEL by Analog Devices is a CMOS SPDT multiplexer with 4 channels. It operates at a nominal voltage of +-5V and has a max on-state resistance of 9 ohm. This multiplexer is commonly used in automotive applications due to its small size and high temperature tolerance.
PI5A3157CEX
Diodes Incorporated
PI5A3157CEX by Diodes Inc. is a CMOS single-ended multiplexer with 6 terminals, operating at temperatures from -40 to 85°C. It has a max on-state resistance of 24 ohm and a switch-on time of 13 ns, making it ideal for industrial applications requiring precise signal routing in compact spaces.
74HC4052D-Q100,118
NXP Semiconductors' 74HC4052D-Q100,118 is a CMOS differential multiplexer with 4 channels and on-state resistance of 270 ohm. AEC-Q100 screened for automotive applications, it operates b/w -40 to 125 °C with low supply current of 0.32 mA. This small outline package switch has gull wing terminals and is ideal for automotive electronics requiring reliable signal switching.
ADG732BSUZ
ADG732BSUZ by Analog Devices is a 32-channel CMOS multiplexer with 5.5 ohm max resistance and 37 ns switch-on time. It operates in industrial temperature range (-40 to 85 °C) and has a thin profile flatpack package, making it ideal for high-speed signal switching applications.
DG409DY
Vishay Intertechnology's DG409DY is a CMOS differential multiplexer with 4 channels and 2 functions. It operates at temperatures ranging from -40 to 85°C, with a max seated height of 1.75mm. Ideal for industrial applications requiring low on-state resistance and high off-state isolation.
ADG1436YCPZ-REEL
ADG1436YCPZ-REEL by Analog Devices is a 2-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 4 ohm and switching voltage of +-5/+12/+-15 V. Ideal for automotive applications requiring fast switching and high isolation levels.
74HC4052D
Toshiba
DIFFERENTIAL MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FSA1156P6X
FSA1156P6X by Onsemi is a SPST multiplexer with 2.7V nominal voltage, 1.65V min supply voltage, and 5.5V max supply voltage. It features a max on-state resistance of 2.1 ohm and a max switch-on time of 40ns, making it ideal for industrial applications requiring fast switching capabilities in compact designs.
Fairchild Semiconductor
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1153UCX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6X
FSA1156L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1208BQX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6
FSA1157L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UMX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1256AL8X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VBCC; Package Shape: SQUARE; Surface Mount: YES;
FSA1256L8X
FSA1257AL8X
FSA110UMX
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1257L8X
FSA1257L8X by Onsemi is a CMOS SPST switch with 2 functions, 8 terminals, and a max on-state resistance of 4 ohm. It operates at industrial temperature grades with a supply voltage range of 1.65V to 5.5V, making it suitable for various multiplexing and switching applications in electronics.
FSA110K8X
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved