Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FSA1157P6X by Onsemi is a SPST switch with 2.1 ohm Ron and 40 ns switch-on time. Operating b/w -40 to 85 °C, it has a supply voltage range of 1.65-5.5 V. Ideal for industrial applications requiring compact, low-power multiplexers & switches in small outline packages.
Median Price
$0.278
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Rochester
1+ parts
100+ parts
$0.261
1k+ parts
$0.236
10k+ parts
-
Digiode
$0.264
Nova Conductors
$0.411
Forefront Electronics and Design
$1.230
Flip Electronics
Chip Stock
Vyrian
ACDS - Activité Composants Distribution Service
Prism Electronics
Semicontronic
$0.230
$0.229
Ampacity Inc.
Corphita
$0.250
Corohmni
Continental Prestige Electronics
$0.403
Argo Parts USA
$0.399
Netroflash
Microchip USA
$1.710
$1.700
$1.690
AZTECH Wire
$8.528
Aztec Data Supply Inc.
$23.820
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Perfect Parts
Lixinc
TANS Electronics
Authorized Procurement Solutions
Kulean Microsystems
Glotronic Ltd.
A-Z Elektronik GmbH
Futuretech Components
Alle Elektronik GmbH
SupplyDigital Components
Supply Digital
UHIMA Technologies
Problanco Electronics
The use of plastic/epoxy material makes the package durable and resistant to environmental factors, ensuring long-term reliability.
Being surface mountable allows for easy and efficient integration in circuit boards, saving space and simplifying assembly processes.
The 2.7V nominal supply voltage ensures compatibility with a wide range of applications and power sources.
With a high maximum operating temperature of 85°C, this product can withstand demanding industrial environments.
CMOS technology provides low power consumption and high noise immunity, making this multiplexer/switch efficient and reliable.
Multiplexers & Switches FSA1157P6X attributes and parameters. Explore more Multiplexers & Switches devices from Onsemi
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Normal Position (V):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-on Time:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
FSA1157P6X Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
BAV99
Comchip Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Texas Instruments
LM358N by Texas Instruments is an operational amplifier with 2 functions, offering a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 85 dB. Widely used in commercial applications, it operates at temperatures ranging from 0 to 70 °C and has a unity gain bandwidth of 1000 kHz.
Leshan Radio
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
BSS138
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: TIN LEAD; Package Body Material: PLASTIC/EPOXY;
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
SS14
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
National Semiconductor
LM555CN
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
Dc Components
ADG508AKRZ-REEL
Rochester Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TS5A3159MDBVREP
TS5A3159MDBVREP by Texas Instruments is a SPDT switch with 1.3 ohm Ron, 95 ns switch-on time, and 63 dB isolation. Ideal for military-grade applications due to its MIL-STD temperature range and low profile package design. Suitable for multiplexing and signal routing in compact electronic systems.
FSA5157P6X
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG409DYZ-T
Intersil
DIFFERENTIAL MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ADG419BRMZ-REEL7
Analog Devices
ADG419BRMZ-REEL7 by Analog Devices is an 8-terminal SPDT switch with a max on-state resistance of 35 ohm. Operating at -40 to 85 °C, it has a peak reflow temperature of 260 C and offers 80 dB off-state isolation. Ideal for industrial applications requiring fast switching times and high reliability in compact designs.
MAX4567EEE+
MAX4567EEE+ by Analog Devices is a dual-function audio/video switch with 16 terminals, operating at -40 to 85°C. It features a max on-state resistance of 60 ohm and nominal off-state isolation of 83 dB. Ideal for industrial applications requiring CMOS technology and break-before-make switching behavior.
MAX4547EEE+
Analog Devices' MAX4547EEE+ is a 16-terminal CMOS audio/video switch with 2 functions, operating at -40 to 85°C. It features a max on-state resistance of 20Ω, switching time of 150ns, and nominal off-state isolation of 82dB. Ideal for industrial applications requiring high-speed signal routing in compact designs.
PTMUX1574DYYR
PTMUX1574DYYR by Texas Instruments is a 16-terminal SPDT multiplexer with a max on-state resistance of 4.5 ohm and nominal off-state isolation of 75 dB. It operates in temperatures ranging from -40 to 125 °C and is ideal for automotive applications due to its CMOS technology and small outline package style.
CD74HC4067M96G4
CD74HC4067M96G4 by Texas Instruments is a CMOS multiplexer with 24 terminals, operating voltage of 2-6V, and on-state resistance of 270 ohm. Ideal for military-grade applications due to its small outline package and high isolation of 75 dB. It offers fast switching times of 60 ns and common output configuration.
NLV74HC4067ADTR2G
NLV74HC4067ADTR2G by Onsemi is a 4-function multiplexer with 24 terminals, operating b/w -55 to 125 °C. It features a max on-state resistance of 160 ohm and offers an off-state isolation of 65 dB. Ideal for military-grade applications requiring CMOS technology in compact designs.
CD74HC4051E
Thomson Consumer Electronics
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
MPC506AUG4
The Texas Instruments MPC506AUG4 is a CMOS single-ended multiplexer with 28 terminals in a small outline package. It operates at temperatures ranging from -40 to 85 °C and has a max on-state resistance of 1800 ohm. Ideal for industrial applications requiring common output switching with a supply current of up to 1.5 mA.
DG412DY
Calogic
Multiplexers or Switches; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DG403DYZ
Renesas Electronics
The Renesas Electronics DG403DYZ is a SPDT multiplexer switch with 2 functions, operating at temperatures from -40 to 85°C. It has a max on-state resistance of 45 ohm and a fast switch-on time of 150 ns. Ideal for industrial applications requiring precise signal routing in compact spaces.
ADG706BRUZ
ADG706BRUZ by Analog Devices is a 28-terminal SPST multiplexer with 16 channels. It operates at -40 to 85°C, with a max on-state resistance of 4.5 ohm and switching time of 50 ns. Ideal for industrial applications requiring high-speed signal switching in compact designs.
ADG613YRUZ
ADG613YRUZ by Analog Devices is a 4-function multiplexer with 16 terminals, operating at -40 to 125 °C. It has a max on-state resistance of 115 ohm and switching voltage of 5.5 V, suitable for automotive applications requiring high isolation and low signal current.
DG411DYZ-T
Renesas Electronics' DG411DYZ-T is a CMOS SPST switch with 4 functions, 35 ohm Ron, and 175 ns switch-on time. It operates in industrial temperatures from -40 to 85 °C and has a small outline package for applications requiring high isolation at nominal voltage of +/-15 V.
PCA9546APWT
PCA9546APWT by Texas Instruments is a 4-channel multiplexer with a supply voltage range of 2.3V to 5.5V, ideal for applications requiring separate outputs and low on-state resistance of 45 ohm. With a small outline package style and dual terminal position, it operates b/w -40°C to 85°C for versatile use in various electronic systems.
DG403DY-T1-E3
Vishay Intertechnology's DG403DY-T1-E3 is a CMOS SPDT switch with 2 functions, 16 terminals, and max on-state resistance of 45 ohm. With a supply voltage range of ±15V and industrial temperature grade, it suits applications requiring fast switching times like signal routing in industrial electronics.
74LVC1G3157GW
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ADG751ARMZ
FSA1156P6X
FSA1156P6X by Onsemi is a SPST multiplexer with 2.7V nominal voltage, 1.65V min supply voltage, and 5.5V max supply voltage. It features a max on-state resistance of 2.1 ohm and a max switch-on time of 40ns, making it ideal for industrial applications requiring fast switching capabilities in compact designs.
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1153UCX
AUDIO/VIDEO SWITCH; Temperature Grade: INDUSTRIAL; No. of Terminals: 12; Package Code: VFBGA; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6X
FSA1156L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1208BQX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 20; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1157P6
FSA1157L6X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UMX
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 28; Package Code: HVQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1256AL8X
SPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VBCC; Package Shape: SQUARE; Surface Mount: YES;
FSA1256L8X
FSA1257AL8X
FSA110UMX
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: VQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1257L8X
FSA1257L8X by Onsemi is a CMOS SPST switch with 2 functions, 8 terminals, and a max on-state resistance of 4 ohm. It operates at industrial temperature grades with a supply voltage range of 1.65V to 5.5V, making it suitable for various multiplexing and switching applications in electronics.
FSA110K8X
DPST; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: VSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FSA1211UDMX
FSA1157P6_NL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved