Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FS7140-01(16SOIC)TR clock generator by Onsemi is a CMOS technology device with 16 terminals and a supply voltage of 3.3V. It operates b/w 0 °C to 70°C, making it suitable for commercial applications. This small outline package in rectangular shape is surface mountable, ideal for various electronic systems requiring precise timing control.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Native Components
$1.000
Northwest PG Solutions
$1.100
Problanco Electronics
Kulean Microsystems
Corphita
SupplyDigital Components
Corohmni
TANS Electronics
UHIMA Technologies
This material provides durability and protection for the internal components of the clock generator, ensuring a longer lifespan.
Enables easy and efficient installation on circuit boards, saving space and reducing assembly time.
Operates on a common voltage level, compatible with many systems and devices.
Offers ample connection points for interfacing with other components in the system.
Ensures reliable performance even under high temperature conditions, suitable for various applications.
Operates effectively in colder environments, providing versatility for different operating conditions.
Designed for standard commercial use, making it suitable for a wide range of industries and applications.
Utilizes CMOS technology known for low power consumption and high noise immunity, enhancing efficiency and reliability.
Maintains a consistent voltage level for stable operation, reducing the risk of voltage fluctuations.
Provides precise spacing for terminals, facilitating easy and accurate connections during installation.
Clock Generators FS7140-01(16SOIC)TR attributes and parameters. Explore more Clock Generators devices from Onsemi
JESD-30 Code:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Qualification:
Sub-Category:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
FS7140-01(16SOIC)TR Peripheral ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBR0540T1G
Onsemi
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
1N4148
Panjit International
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Shanghai Lunsure Electronic Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
0462-201-16141
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
Leshan Radio
Hitano Enterprise
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BAV99
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CY2545QI
Infineon Technologies
Infineon's CY2545QI is a clock generator with 166 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and supports supply voltage range of 2.25V to 3.6V. With a compact square package style and surface mount design, it features 24 terminals in a quad position for easy integration.
AV9155-01CW20
Avasem
Clock Generators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Package Shape: RECTANGULAR;
LMK04828BISQX/NOPB
LMK04828BISQX/NOPB clock generator by Texas Instruments operates at a max output frequency of 500 MHz, with a supply voltage range of 3.15V to 3.45V. This industrial-grade chip carrier is suitable for applications requiring precise clock generation in a compact form factor, featuring a quad-terminal position and CMOS technology.
CDCM6208V2GRGZR
The Texas Instruments CDCM6208V2GRGZR clock generator operates at a max frequency of 800 MHz with a supply voltage range of 1.71-3.465 V. This industrial-grade chip carrier is ideal for applications requiring precise timing control in electronic systems, featuring a compact square package and quad terminal position.
ICS9148F-12
Integrated Circuit Systems
Clock Generators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: SSOP; Package Shape: RECTANGULAR;
SI5338A-B08744-GMR
Silicon Labs
SI5338A-B08744-GMR by Silicon Labs is a clock generator with 710 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71V to 1.98V. This CMOS technology chip comes in a square package style with 24 terminals in a quad position.
LMK04208NKDT
LMK04208NKDT by Texas Instruments is a clock generator with a max output frequency of 1536 MHz. It operates in industrial temperature range (-40 to 85 °C) and has a supply voltage range of 3.15V to 3.45V. This chip carrier package with very thin profile is suitable for various applications requiring precise clock generation at high frequencies.
SI5317D-C-GMR
Skyworks Solutions
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
ICS511MILF
Integrated Device Technology
CLOCK GENERATOR, OTHER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SI5340D-B05891-GMR
SI5340D-B05891-GMR by Silicon Labs is a clock generator with 44 terminals, operating at 350 MHz max frequency. It has a supply voltage range of 1.71V to 1.89V and operates b/w -40°C to 85°C. Ideal for applications requiring precise clock generation in compact spaces.
SI5338K-B02726-GM
SI5338K-B02726-GM by Silicon Labs is a clock generator with 710 MHz output frequency, suitable for industrial applications. It operates b/w -40 to 85 °C and has a supply voltage range of 1.71V to 1.98V. This CMOS technology device comes in a square package with 24 terminals, making it ideal for processor-specific peripherals.
6V49205BNLGI
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ICS180M-51LFT
CLOCK GENERATOR, OTHER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
8T49N242-998NLGI
The Renesas Electronics clock generator 8T49N242-998NLGI operates at a max output frequency of 1000 MHz with a supply voltage range of 2.375V to 2.625V. This chip carrier package is suitable for industrial applications requiring precise timing and clock generation up to 875 MHz, featuring a compact square shape with surface mount capability.
SI5356A-B-GM
SI5356A-B-GM clock generator by Silicon Labs operates at 200 MHz, with a supply voltage range of 1.71-1.98 V. Ideal for industrial applications, it features a compact square package with 24 terminals and CMOS technology.
CY29430FLQXIT
CY29430FLQXIT clock generator by Infineon operates at a max frequency of 2100 MHz with 16 terminals in a square package. It has a supply voltage range of 1.71V to 1.89V, suitable for industrial applications requiring precise timing and processor-specific clock generation. The compact chip carrier design with a low profile makes it ideal for space-constrained environments.
SI5386A-E-GMR
SI5386A-E-GMR by Silicon Labs is a clock generator with 737.28 MHz output frequency, suitable for JITTER ATTENUATOR applications. It operates b/w -40 to 85 °C with 1.7-1.89 V supply voltage range and features a compact 9x9 mm square package style for surface mount assembly.
SI5335A-B11058-GMR
CLOCK GENERATOR, PCIe; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE; Length: 4 mm;
9FGV1004B000NBGI8
The Renesas Electronics 9FGV1004B000NBGI8 clock generator operates at a max output frequency of 325 MHz with a supply voltage range of 1.71-1.89 V. This industrial-grade chip carrier is suitable for processor-specific applications, featuring CMOS technology and quad terminals in a compact square package style.
DSC557-0334FI1-T
Microchip Technology
DSC557-0334FI1-T by Microchip Technology is a clock generator with a max output frequency of 460 MHz. Operating b/w -40 to 85°C, it has a supply voltage range of 2.25V to 3.6V and draws a max current of 23mA. Ideal for applications requiring precise timing in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FS7140-01G-XTD
FS7140-01G-XTD by Onsemi is a clock generator with max output frequency of 300 MHz, operating at 3.3V. It comes in a small outline package suitable for processors, with temp range of 0-70°C. Ideal for applications requiring precise timing control and clock signal generation.
FS7140-01G(16SSOP)
Clock Generators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
FS7145-01-XTD
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FS7140-01G-XTP(16SOIC)
FS7140-02G-XTD
FS7140-02G-XTD Clock Generator by Onsemi operates at 300 MHz with a supply voltage range of 3-3.6 V. Ideal for processors, it features a small outline package and CMOS technology, suitable for commercial-grade applications requiring precise clock generation up to 35 MHz.
FS7140-01G-XTD(16SSOP)
CLOCK GENERATOR, PROCESSOR SPECIFIC; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
FS7145-01-XTP
FS7140-01G(16SSOP)TR
FS7140-01G-XTP(16SSOP)
FS7140-01-XTD(16SOIC)
Clock Generators; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
FS7140-01-XTP(16SSOP)
FS7140-01G-XTD(16SOIC)
FS7140-02G-XTP
FS7140-01(16SSOP)TR
FS7140-01G-XTP
FS7140-01(16SOIC)
FS7140-01(16SSOP)
FS7140-01-XTD(16SSOP)
FS7140-01-XTP(16SOIC)
FS7140-01(16SOIC)TR
Ami Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved