Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDPF5N50UT by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. It has a max IDM of 16A and EAS of 216mJ, suitable for SWITCHING applications. With a package style of FLANGE MOUNT and operating temperature up to 150°C, it offers high power dissipation at 28W in an ENHANCEMENT MODE configuration.
Median Price
$1.143
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.390
100+ parts
$0.893
1k+ parts
$0.616
10k+ parts
$0.527
Element14
$1.676
$1.177
$0.767
$0.720
Farnell
$1.699
$1.040
-
Adafruit Industries
$1.875
$1.781
Rochester
$0.599
$0.497
$0.443
DigiKey
$0.750
Verical
$0.622
$0.554
Flip Electronics (Authorized)
RS (Exports)
$0.896
$0.618
Digiode
$0.583
Nova Conductors
$0.792
Chip Stock
Vyrian
Flip Electronics
DigiKey Marketplace
$0.512
Fibra_Brandt Electronic GMBH
LittleDiode
Corohmni
Ampacity Inc.
$0.520
Semicontronic
$0.507
$0.504
Corphita
$0.553
Aztec Data Supply Inc.
$0.693
Argo Parts USA
$0.775
Bastille Electronics
$0.752
$0.715
$0.705
Andel Nordic
$1.200
$1.152
Continental Prestige Electronics
$1.310
$0.802
Advanced Electronics
Microchip USA
$9.035
SupplyDigital Components
Authorized Procurement Solutions
Kepictronics
Problanco Electronics
Lixinc
Kulean Microsystems
Supply Digital
Perfect Parts
Assy Fe
TANS Electronics
UHIMA Technologies
The plastic/epoxy material makes the product lightweight and durable, ideal for a wide range of applications.
N-channel FETs offer high efficiency and fast switching speeds, making them suitable for high-performance applications.
The built-in diode simplifies circuit design and ensures reliable operation in various switching applications.
Designed specifically for switching applications, this FET offers low power consumption and high efficiency.
With a high breakdown voltage, this FET can handle high voltages without risk of damage, ensuring long-term reliability.
The rectangular shape allows for easy mounting and space-saving installation in a variety of electronic devices.
Through-hole terminals provide a secure connection to the circuit board, reducing the risk of connectivity issues.
Enhancement mode FETs offer simple circuit design and fast response times, making them ideal for switching applications.
The high pulsed drain current rating allows for reliable performance in high-current applications.
The high avalanche energy rating ensures the FET can handle transient voltage spikes without damage.
With a maximum drain current of 4 A, this FET is ideal for low to medium power applications.
The three terminals provide the necessary connections for the FET to function effectively in a circuit.
With a high power dissipation rating, this FET can handle high power levels without overheating.
The flange mount package style provides secure mounting and efficient heat dissipation for optimal performance.
MOS technology offers low power consumption and high efficiency, making it an ideal choice for various applications.
With a high operating temperature rating, this FET can function reliably in a wide range of environments.
Silicon material offers high reliability and stable performance over a wide temperature range.
The matte tin finish provides excellent solderability and reliability for secure connections.
The low drain-source on resistance minimizes power losses and ensures efficient operation.
The single terminal position simplifies circuit design and installation, making it easy to integrate into various applications.
The isolated case connection helps prevent electrical interference and ensures stable operation in a variety of electronic systems.
Power Field Effect Transistors (FET) FDPF5N50UT attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Case Connection:
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FDPF5N50UT Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
SMBJ18CA
Vishay Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
M39029/58-360
Molex
CONNECTOR ACCESSORY; Alternate Contact Sources: MILITARY; Removal Tool Sources: MILITARY; Material: COPPER ALLOY; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354;
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM555CM
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
CRCW080510K0FKEA
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
IRF840PBF
Vishay Intertechnology's IRF840PBF is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features 32A IDM and 510mJ EAS ratings. The transistor operates in ENHANCEMENT MODE with 0.85 ohm RDS(on) and can handle up to 125W power dissipation.
IRF7425TRPBF-1
Infineon Technologies
IRF7425TRPBF-1 by Infineon is a P-channel Power FET with 20V DS breakdown voltage, 15A max drain current, and 0.0082 ohm RDS(on). It's used in power management applications due to its small outline package, 60A pulsed drain current, and -55 to +150°C operating temperature range.
FQD1N80TM
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 1 A;
NDT2955
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
IRF7103TRPBF
International Rectifier
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Package Body Material: PLASTIC/EPOXY; Additional Features: LOGIC LEVEL COMPATIBLE;
IPD90P04P405ATMA1
IPD90P04P405ATMA1 by Infineon is a P-CHANNEL FET with 40V DS Breakdown Voltage, 360A IDM, and 0.0047 ohm RDS(ON). It's used in power applications due to its 60mJ EAS rating and ENHANCEMENT MODE operation.
SI7439DP-T1-E3
Vishay Intertechnology's SI7439DP-T1-E3 is a P-CHANNEL FET with 150V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 50A IDM, 80mJ EAS, and 0.09 ohm Drain-Source On Resistance. Operating at up to 150°C, it has a small outline package style for efficient heat dissipation.
STW9N150
STMicroelectronics
STW9N150 by STMicroelectronics is a Power FET with 1500V DS Breakdown Voltage, 32A IDM, and 320W Pd. Ideal for SWITCHING applications, it features N-CHANNEL polarity, SINGLE configuration with built-in diode, and operates in ENHANCEMENT MODE.
CSD18543Q3A
CSD18543Q3A by Texas Instruments is a N-CHANNEL Power FET for SWITCHING applications. It features 60V DS Breakdown Voltage, 156A IDM, and 0.0156 ohm Drain-Source On Resistance. With METAL-OXIDE SEMICONDUCTOR technology, it operates b/w -55 to 150 °C, making it ideal for high-power switching circuits.
FDD8424H_F085A
N-CHANNEL AND P-CHANNEL; Configuration: COMMON DRAIN, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 35 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Peak Reflow Temperature (C): 260;
BSP297H6327XTSA1
Infineon's BSP297H6327XTSA1 is a N-CHANNEL FET with 200V DS Breakdown Voltage, ideal for power applications. Features include 2.64A IDM, 1.8Ω RDS(on), and AEC-Q101 compliance. Suitable for enhancement mode operation in automotive electronics due to its high reliability and performance.
IRF3205LPBF
IRF3205LPBF by Infineon is a N-CHANNEL FET with 55V DS Breakdown Voltage, ideal for SWITCHING applications. It features 390A IDM, 264mJ EAS, and 0.008 ohm RDS(on). With a max power dissipation of 200W and operating temperature of 175°C, it's suitable for high-power circuits requiring efficient switching capabilities.
IRLML6402GTRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum DS Breakdown Voltage: 20 V; Transistor Application: SWITCHING;
IRF7304TRPBF
P-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Additional Features: LOGIC LEVEL COMPATIBLE; Moisture Sensitivity Level (MSL): 1;
NTD2955T4G
Onsemi
NTD2955T4G by Onsemi is a P-CHANNEL power FET with a min DS breakdown voltage of 60V. It is used for switching applications and has a max pulsed drain current of 18A.
IRF3710PBF
IRF3710PBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage and 180A IDM. Ideal for SWITCHING applications, it has a max power dissipation of 200W and operates in ENHANCEMENT MODE at temperatures ranging from -55 to 175°C.
IRFR024NTRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 45 W; Maximum Drain Current (ID): 17 A; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier;
SI7850DP-T1-E3
SI7850DP-T1-E3 by Vishay Intertechnology is an N-channel power field effect transistor (FET) with a min DS breakdown voltage of 60V. It is designed for switching applications and has a max pulsed drain current of 40A. This surface mount transistor operates in enhancement mode and has a max operating temperature of 150°C.
FDS8984_F085
FDS8984_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. Features include 2 ELEMENTS WITH BUILT-IN DIODE, 30A Max Pulsed Drain Current, and 0.023 ohm Max Drain-Source On Resistance. Suitable for surface mount with GULL WING terminals in a SMALL OUTLINE package style.
IRF640STRLPBF
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): 18 A; Avalanche Energy Rating (EAS): 580 mJ; Terminal Position: SINGLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDPF8N50NZU
FDPF10N60NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38 W; Maximum Drain Current (ID): 10 A; Minimum DS Breakdown Voltage: 600 V;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38 W; Maximum Operating Temperature: 150 Cel; Terminal Position: SINGLE;
FDPF12N50NZ
FDPF12N50NZ by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. Ideal for SWITCHING applications, it features a Max IDM of 46A and 0.52 ohm RDS(on). The transistor operates in ENHANCEMENT MODE and has a max power dissipation of 42W.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 42 W; Maximum Drain-Source On Resistance: .52 ohm; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDPF44N25T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Package Shape: RECTANGULAR; Qualification: Not Qualified;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 56 W; Maximum Operating Temperature: 150 Cel; JESD-30 Code: R-PSFM-T3;
FDPF5N50UT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; Maximum Drain-Source On Resistance: 2 ohm; Maximum Pulsed Drain Current (IDM): 16 A;
FDPF5N50NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Case Connection: ISOLATED; Maximum Drain Current (ID): 4.5 A;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 30 W; Maximum Drain Current (ID): 4.5 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDPF18N20FT
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 41 W; Maximum Operating Temperature: 150 Cel; Transistor Element Material: SILICON;
FDPF18N20FT by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 200V. It is an N-channel transistor used for switching applications, with a max pulsed drain current of 72A and a max power dissipation of 41W.
FDPF3N50NZ
FDPF3N50NZ by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage. It has a max IDM of 12A and EAS of 113mJ, suitable for SWITCHING applications. Operating in ENHANCEMENT MODE, it features a max power dissipation of 27W and an RDS(on) of 2.5 ohm, making it ideal for high-power requirements.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 27 W; Operating Mode: ENHANCEMENT MODE; JESD-30 Code: R-PSFM-T3;
FDPF4N60NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; JEDEC-95 Code: TO-220AB; Maximum Operating Temperature: 150 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (ID): 3.8 A;
FDPF20N50T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 38.5 W; No. of Terminals: 3; Package Body Material: PLASTIC/EPOXY;
FDPF20N50T by Onsemi is a N-CHANNEL Power FET with 500V DS Breakdown Voltage and 80A IDM. Ideal for SWITCHING applications, it features a single configuration with built-in diode and 0.23 ohm Drain-Source On Resistance. Operating in ENHANCEMENT MODE, it has a max power dissipation of 38.5W at 150°C temperature.
FDPF7N60NZ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 33 W; Operating Mode: ENHANCEMENT MODE; Package Body Material: PLASTIC/EPOXY;
FDPF7N60NZ by Onsemi is a power field effect transistor (FET) with a min DS breakdown voltage of 600V. It is used for switching applications and has a max pulsed drain current of 26A.
FDPF5N50T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 28 W; Operating Mode: ENHANCEMENT MODE; Case Connection: ISOLATED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved