Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FDC3601N by Onsemi is a N-CHANNEL FET with 2 elements & built-in diode, ideal for SWITCHING applications. It features a Min DS Breakdown Voltage of 100V, Max Drain Current of 1A, and Max Power Dissipation of 0.7W. With a package style of SMALL OUTLINE and operating temperature up to 150°C, it offers reliable performance in various electronic circuits.
Median Price
$0.362
Lifecycle Status
Suppliers In-Stock
27
In-Stock Inventory
1k+
DigiKey
1+ parts
$1.030
100+ parts
$0.420
1k+ parts
$0.324
10k+ parts
-
Mouser Electronics
$0.421
$0.299
$0.252
Adafruit Industries
$1.704
$1.618
Future Electronics
$0.505
Flip Electronics (Authorized)
Newark
$0.350
$0.244
$0.234
Farnell
$0.319
$0.203
$0.188
Element14
$0.571
$0.363
$0.302
Arrow
$0.192
Verical
$0.296
$0.267
Master Electronics
$0.373
$0.251
$0.227
Rochester
$0.260
$0.216
$0.193
Chip1Stop
$0.228
Digiode
$0.076
Nova Conductors
$0.287
Maritex
$0.626
$0.366
$0.338
$0.305
TME
$0.970
$0.403
$0.270
$0.261
IBS Electronics
$0.726
NAC Semi
Chip Stock
Flip Electronics
Vyrian
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
A2Z Electronics, Inc.
NexGen Digital
Rebound Electronics
Ampacity Inc.
$0.068
Semicontronic
$0.066
Corphita
$0.072
Corohmni
$0.080
Aranea Global
$0.281
Argo Parts USA
$0.278
Aztec Data Supply Inc.
$0.561
Continental Prestige Electronics
$0.639
$0.351
$0.215
$0.187
Advanced Electronics
Modulus Dynamics
$1.760
Perfect Parts
Kepictronics
GreenTree Electronics
Lixinc
SupplyDigital Components
Problanco Electronics
Robosynatics
$0.358
Lucentia Tech
Kulean Microsystems
Futuretech Components
S.R.D Solutions
A-Z Elektronik GmbH
iodParts Technologies Inc.
Alle Elektronik GmbH
Authorized Procurement Solutions
UHIMA Technologies
TANS Electronics
Supply Digital
The use of PLASTIC/EPOXY material ensures durability and protection for the internal components of the transistor.
N-CHANNEL FETs generally have better performance in switching applications compared to P-CHANNEL FETs.
The built-in diode provides protection against voltage and current spikes, making this transistor suitable for switching applications.
Designed specifically for switching applications, ensuring reliable performance in controlling electrical signals.
Being surface mountable allows for easier and more efficient soldering onto circuit boards, saving space and simplifying assembly.
The high breakdown voltage of 100 V provides a wider safety margin for voltage spikes and surges in the circuit.
With a maximum drain current of 1 A, this transistor can handle moderate current loads in various applications.
The maximum power dissipation of 0.7 W indicates the transistor's ability to dissipate heat efficiently, ensuring reliable operation.
With a maximum operating temperature of 150°C, this transistor can withstand high temperature environments without compromising performance.
The low drain-source on resistance of 0.5 ohm minimizes power losses and improves efficiency in switching applications.
Small Signal Field Effect Transistors (FET) FDC3601N attributes and parameters. Explore more Small Signal Field Effect Transistors (FET) devices from Onsemi
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JESD-30 Code:
JESD-609 Code:
Moisture Sensitivity Level (MSL):
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Transistor Application:
Transistor Element Material:
FDC3601N Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
BSS138W-7-F
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Sangdest Microelectronics (Nanjing)
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
1N4148WT
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
2N7002DW
Transys Electronics
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Shape: RECTANGULAR; Maximum Feedback Capacitance (Crss): 5 pF;
FDS9435A
The Onsemi FDS9435A is a P-CHANNEL FET with 30V DS Breakdown Voltage, ideal for SWITCHING applications. It features 5.3A Drain Current, 0.05 ohm On Resistance, and operates in ENHANCEMENT MODE. With a max power dissipation of 2.5W and operating temperature range from -55 to 175 °C, it is suitable for various electronic designs requiring high performance in a small outline package.
JANTX2N6796
Microsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Package Body Material: METAL; Reference Standard: MIL-19500; Terminal Form: WIRE;
BSS308PEH6327XTSA1/SAMPLE
Infineon Technologies
Small Signal Field-Effect Transistors;
MMBF4117
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
FDS6912A
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Moisture Sensitivity Level (MSL): 1; Transistor Application: SWITCHING;
LBSS84LT1G
Leshan Radio
LBSS84LT1G by Leshan Radio is a P-CHANNEL small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.13A and a max power dissipation of 0.225W.
FDN304PZ
FDN304PZ by Onsemi is a P-CHANNEL FET with 20V DS breakdown voltage, ideal for switching applications. It features a max drain current of 2.4A and 0.052 ohm on-resistance, operating in enhancement mode at up to 150°C. This small outline transistor with gull wing terminals is designed for surface mount configurations.
2N7002WT1G
2N7002WT1G by Onsemi is a N-CHANNEL FET with 60V DS breakdown voltage, 0.31A max drain current, and 1.6 ohm max on resistance. Ideal for switching applications in enhancement mode operation, this transistor comes in a small outline package with gull wing terminals for surface mount assembly.
FDV302PD87Z
Fairchild Semiconductor's FDV302PD87Z is a P-CHANNEL FET with 25V DS Breakdown Voltage, 0.12A ID, and 10 ohm RDS. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at up to 150°C. Package: PLASTIC/EPOXY, GULL WING terminals, SMALL OUTLINE style.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
BS250P
Diodes Incorporated
Diodes Inc.'s BS250P is a P-CHANNEL FET with 45V DS Breakdown Voltage and 0.23A Drain Current. Ideal for applications requiring low power dissipation, such as portable electronics. Features include ENHANCEMENT MODE operation, SILICON transistor element, and 150°C max operating temp.
NTR1P02T1G
NTR1P02T1G by Onsemi is a P-CHANNEL FET with 20V DS Breakdown Voltage, 0.18 ohm RDS(on), and 1A Drain Current. Ideal for SWITCHING applications, it features ENHANCEMENT MODE operation in a SMALL OUTLINE package with GULL WING terminals. Operating up to 150°C, it's designed for high-performance electronic systems.
2N7002P,215
NXP Semiconductors
2N7002P,215 by NXP Semiconductors is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.36A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with 1.6 ohm On Resistance. Package style is SMALL OUTLINE, suitable for surface mount technology.
DMP10H4D2S-7
DMP10H4D2S-7 by Diodes Inc. is a P-channel FET with 100V DS breakdown voltage, 0.27A max drain current, and 4.2 ohm max on resistance. Ideal for switching applications in automotive electronics due to AEC-Q101 compliance and -55°C min operating temp.
BSS123
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
2N7000BU
2N7000BU by Onsemi is a N-CHANNEL FET with max drain current of 0.2A and power dissipation of 0.4W. Ideal for low-power applications, it operates at up to 150°C temp, featuring metal-oxide semiconductor tech. Suitable for single configuration circuits requiring efficient switching capabilities.
SI2371EDS-T1-GE3
SI2371EDS-T1-GE3 by Vishay Intertechnology is a P-CHANNEL FET with 30V DS Breakdown Voltage and 4.8A ID. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at -55 to 150 °C, featuring 0.045 ohm RDS(on) and 1.7W Power Dissipation in a SMALL OUTLINE package.
2N7002K
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Transistor Application: SWITCHING; Maximum Time At Peak Reflow Temperature (s): 30;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
FDC3601N
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .7 W; Maximum Drain-Source On Resistance: .5 ohm; Package Shape: RECTANGULAR;
FDC3512
FDC3512 by Onsemi is a N-CHANNEL FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 3A Drain Current, 0.077 ohm On Resistance, and operates in ENHANCEMENT MODE. With a max power dissipation of 1.6W and operating temperature range from -55 to 150 °C, it is suitable for various electronic designs requiring high performance in a small outline package.
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Operating Mode: ENHANCEMENT MODE; Terminal Finish: MATTE TIN;
FDC3535
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Body Material: PLASTIC/EPOXY; Maximum Drain Current (ID): 2.1 A;
FDC3535 by Onsemi is a P-CHANNEL FET with 80V DS Breakdown Voltage, ideal for SWITCHING applications. It features 2.1A Drain Current, 0.183 ohm On Resistance, and operates in ENHANCEMENT MODE. With GULL WING terminals and PLASTIC/EPOXY body, it's designed for surface mount in small outline packages at up to 150°C.
FDC3612
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Terminal Finish: MATTE TIN; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Moisture Sensitivity Level (MSL): 1; Qualification: Not Qualified;
FDC3512_NL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Maximum Drain Current (Abs) (ID): 3 A; Terminal Finish: MATTE TIN;
FDC365P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Minimum DS Breakdown Voltage: 35 V; No. of Terminals: 6;
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Package Style (Meter): SMALL OUTLINE; Operating Mode: ENHANCEMENT MODE;
FDC30N20DZ
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .96 W; Package Shape: RECTANGULAR; Moisture Sensitivity Level (MSL): 1;
FDC3601ND84Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Transistor Element Material: SILICON; Maximum Drain Current (ID): 1 A;
FDC3612D87Z
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 100 V; Maximum Drain Current (ID): 2.6 A; Maximum Drain-Source On Resistance: .125 ohm;
FDC3612_NF073
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Shape: RECTANGULAR; Terminal Form: GULL WING; Package Style (Meter): SMALL OUTLINE;
FDC3601ND87Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Minimum DS Breakdown Voltage: 100 V; Transistor Application: SWITCHING;
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Operating Mode: ENHANCEMENT MODE; No. of Elements: 2;
FDC3601NL99Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): 1 A; No. of Terminals: 6;
FDC3601NS62Z
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Position: DUAL; Minimum DS Breakdown Voltage: 100 V; JESD-30 Code: R-PDSO-G6;
FDC3601N_NL
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .7 W; Qualification: Not Qualified; Operating Mode: ENHANCEMENT MODE;
FDC3612_NL
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .8 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved