Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FCH47N60N by Onsemi is a N-CHANNEL Power FET with 600V DS Breakdown Voltage. It has a max IDM of 141A and EAS of 3068mJ, making it ideal for SWITCHING applications. The transistor operates in ENHANCEMENT MODE with 0.062ohm RDS(on) and can handle up to 368W power dissipation at a max temp of 150°C.
Median Price
$9.425
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Newark
1+ parts
$12.570
100+ parts
$8.080
1k+ parts
$7.750
10k+ parts
-
Mouser Electronics
$12.830
$10.440
$8.070
$7.930
DigiKey
$5.280
Flip Electronics (Authorized)
Rochester
$7.200
$6.440
$6.060
Verical
$8.438
$7.938
Digiode
$1.995
Vyrian
$2.100
Flip Electronics
$4.360
Chip Stock
DigiKey Marketplace
Zilex Electronics Inc.
R&J Components
Native Components
$0.680
Northwest PG Solutions
$0.748
Corphita
$1.890
Corohmni
Andel Nordic
$4.095
$3.931
Microchip USA
$33.880
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Lixinc
A-Z Elektronik GmbH
TANS Electronics
SupplyDigital Components
Problanco Electronics
Authorized Procurement Solutions
Kepictronics
Kulean Microsystems
Alle Elektronik GmbH
Perfect Parts
UHIMA Technologies
Supply Digital
Provides durability and protection for the internal components of the FET, ensuring a longer lifespan.
Allows the FET to handle high voltage applications with ease, making it suitable for a wide range of power circuits.
Capable of handling high current surges, making it reliable for applications requiring peak power performance.
Efficient heat dissipation capability allows the FET to operate at higher power levels without overheating.
Can operate at high temperatures without performance degradation, suitable for demanding industrial environments.
Power Field Effect Transistors (FET) FCH47N60N attributes and parameters. Explore more Power Field Effect Transistors (FET) devices from Onsemi
Avalanche Energy Rating (EAS):
Configuration:
Minimum DS Breakdown Voltage:
Maximum Drain Current (Abs) (ID):
Maximum Drain Current (ID):
Maximum Drain-Source On Resistance:
Field Effect Transistor Technology:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
No. of Elements:
No. of Terminals:
Operating Mode:
Maximum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Polarity or Channel Type:
Maximum Power Dissipation (Abs):
Maximum Pulsed Drain Current (IDM):
Qualification:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Transistor Application:
Transistor Element Material:
FCH47N60N Transistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
1N4148WS
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Nexperia
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
Surge Components
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
IRFZ44NS
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 94 W; No. of Elements: 1; Package Shape: RECTANGULAR;
FDD6685
FDD6685 by Onsemi is a P-CHANNEL Power FET with 30V DS Breakdown Voltage and 11A Drain Current. Ideal for SWITCHING applications, it features a built-in DIODE, GULL WING terminals, and operates in ENHANCEMENT MODE. With a max power dissipation of 52W and peak reflow temperature of 260°C, it offers reliable performance in various electronic devices.
CSD19534Q5AT
CSD19534Q5AT by Texas Instruments is a N-CHANNEL Power FET with 100V DS Breakdown Voltage. It is used for switching applications, has a max IDM of 137A and an EAS rating of 55mJ.
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
BSS123
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (ID): .17 A; Operating Mode: ENHANCEMENT MODE;
BSC016N06NSATMA1
Infineon's BSC016N06NSATMA1 is a N-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a max IDM of 400A and EAS of 380mJ, ensuring efficient operation. With a drain-source on resistance of 0.0016 ohm and operating temperature up to 150°C, it offers high performance in a small outline package.
IRLL024NTRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL; Case Connection: DRAIN;
FDB2532
FDB2532 by Onsemi is a N-CHANNEL Power FET with 150V DS Breakdown Voltage and 79A Drain Current. Ideal for SWITCHING applications, it features a SINGLE configuration with BUILT-IN DIODE in a PLASTIC/EPOXY package. Operating in ENHANCEMENT MODE, it has an EAS of 400mJ and can handle up to 310W power dissipation.
IRFHS9301TRPBF
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Qualification: Not Qualified; Package Shape: SQUARE; Operating Mode: ENHANCEMENT MODE;
IRFP460
IXYS Corporation
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 280 W; Maximum Operating Temperature: 150 Cel; Maximum Drain Current (Abs) (ID): 20 A;
BSC190N15NS3GATMA1
Infineon BSC190N15NS3GATMA1 is a N-CHANNEL FET with 150V DS breakdown voltage, ideal for switching applications. Features include 200A IDM, 170mJ EAS, and 0.019 ohm RDS(on). Operating from -55 to 150 °C, it has a max power dissipation of 125W in a small outline package.
PSMN4R8-100BSEJ
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 405 W; Maximum Pulsed Drain Current (IDM): 707 A; Terminal Form: GULL WING;
IRLML6344TRPBF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
IRF530NPBF
IRF530NPBF by Infineon is a N-CHANNEL FET with 100V DS Breakdown Voltage, 60A IDM, and 93mJ EAS. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operating in ENHANCEMENT MODE, it has a max power dissipation of 70W and can handle temperatures from -55 to 175 °C.
FDS4465
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2.5 W; Maximum Time At Peak Reflow Temperature (s): 30; Operating Mode: ENHANCEMENT MODE;
FDS8949
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Peak Reflow Temperature (C): 260; Maximum Pulsed Drain Current (IDM): 20 A;
G3R75MT12D
Genesic Semiconductor
G3R75MT12D by Genesic Semiconductor is a N-CHANNEL FET with 1200V DS Breakdown Voltage, ideal for SWITCHING applications. Featuring a max IDM of 70A and EAS of 199mJ, this ENHANCEMENT MODE transistor operates b/w -55 to 175 °C, with 0.097 ohm RDS(on) and 182W power dissipation in a RECTANGULAR package.
SQ2362ES-T1_GE3
Vishay Intertechnology
Vishay Intertechnology's SQ2362ES-T1_GE3 is a N-CHANNEL Power FET with 60V DS Breakdown Voltage and 17A IDM. Ideal for applications requiring high drain current handling, such as automotive power management systems. Features include EAS of 7mJ, -55 to 175 °C operating temp range, and AEC-Q101 compliance.
FQD12N20LTM_F085
FQD12N20LTM_F085 by Fairchild Semiconductor is a N-CHANNEL Power FET with 200V DS Breakdown Voltage, 36A IDM, and 0.32 ohm RDS(on). It is used for SWITCHING applications in ENHANCEMENT MODE with a max power dissipation of 55W.
IRFR6215TRPBF
Infineon's IRFR6215TRPBF is a P-CHANNEL FET with 150V DS Breakdown Voltage, 44A IDM, and 0.295 ohm RDS(on). Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 110W. Suitable for surface mount with GULL WING terminals, it has an operating temp range of -55 to 175 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NTHL067N65S3H
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 266 W; Terminal Position: SINGLE; Package Body Material: PLASTIC/EPOXY;
FCH47N60_F133
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; JEDEC-95 Code: TO-247AB; Package Body Material: PLASTIC/EPOXY;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Maximum Pulsed Drain Current (IDM): 141 A; Peak Reflow Temperature (C): NOT SPECIFIED;
FCH47N60F
N-CHANNEL; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (Abs) (ID): 47 A;
FCH47N60-F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Package Style (Meter): FLANGE MOUNT; Terminal Form: THROUGH-HOLE;
FCH47N60F-F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Transistor Element Material: SILICON; Package Body Material: PLASTIC/EPOXY;
FCH47N60F-F133
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Package Style (Meter): FLANGE MOUNT; Peak Reflow Temperature (C): NOT SPECIFIED;
FCH47N60F_F133
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; No. of Elements: 1; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
FCH47N60NF
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 368 W; Transistor Application: SWITCHING; Operating Mode: ENHANCEMENT MODE;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 368 W; Maximum Drain-Source On Resistance: .065 ohm; Maximum Drain Current (Abs) (ID): 45.8 A;
FCH47N60F_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain-Source On Resistance: .075 ohm; Terminal Position: SINGLE;
FCH47N60_F085
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Transistor Application: SWITCHING; JEDEC-95 Code: TO-247;
FCH47N60N
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 368 W; Package Shape: RECTANGULAR; No. of Elements: 1;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Maximum Drain-Source On Resistance: .073 ohm; Operating Mode: ENHANCEMENT MODE;
FCH47N60
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Maximum Drain Current (Abs) (ID): 47 A; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): 417 W; Package Style (Meter): FLANGE MOUNT; Minimum DS Breakdown Voltage: 600 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved