Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CM1683-02DE by Onsemi is a 2-function data line filter with 2.5V rated voltage and -40 to 85 °C operating temperature range. Ideal for IEC-approved applications, it features 0.003uH inductance, 1 ohm max DC resistance, and 100uF capacitance. Suitable for surface mount with dimensions of L2.1xB2.1xH0.55mm, it has 8 terminals and output impedance of 50 ohms.
Median Price
$0.292
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.304
1k+ parts
$0.252
10k+ parts
$0.225
Verical
$0.281
Vyrian
$0.213
Digiode
$0.237
Chip Stock
Corohmni
Corphita
$0.224
Native Components
$550.666
$539.653
$534.146
$528.640
Northwest PG Solutions
$605.733
Continental Prestige Electronics
$0.230
Problanco Electronics
TANS Electronics
SupplyDigital Components
Kulean Microsystems
UHIMA Technologies
Metaverse IC Inc.
Having IEC approval ensures that this data line filter meets international standards for safety and quality.
This data line filter can perform two different functions simultaneously, providing versatility in filtering capabilities.
With a rated voltage of 2.5V, this data line filter is suitable for use in low voltage applications.
Having 8 terminals allows for multiple connections, enabling efficient filtering of data lines.
As a specialized data line filter, this product is designed to effectively eliminate noise and interference from data signals.
The high maximum operating temperature of 85 °C ensures reliable performance even in demanding conditions.
With a low minimum operating temperature of -40 °C, this data line filter can function effectively in a wide range of environments.
The tin terminal finish provides excellent conductivity and corrosion resistance, enhancing the durability of the data line filter.
The low inductance value ensures that this data line filter offers minimal impedance to the data signals passing through.
With a compact width of 2.1mm, this data line filter can be easily integrated into various electronic devices.
The low DC resistance of 1 ohm minimizes power loss and ensures efficient filtering of data lines.
The small length of 2.1mm contributes to the overall compactness of this data line filter.
The output impedance of 50 ohms is ideal for matching with standard data line impedance, ensuring optimal signal transmission.
The tape and reel packaging method facilitates easy handling, storage, and automated assembly of this data line filter.
Being surface mountable allows for convenient and space-saving installation of this data line filter on PCBs.
The compact dimensions of this data line filter make it suitable for use in small electronic devices where space is limited.
The plastic package material provides good protection against external elements and mechanical stress, enhancing the longevity of the data line filter.
The low height of 0.55mm contributes to the overall slim profile of this data line filter, making it suitable for compact electronic designs.
The capacitance of 100uF allows this data line filter to effectively filter out high-frequency noise and interference from data signals.
Data Line Filters CM1683-02DE attributes and parameters. Explore more Data Line Filters devices from Onsemi
Additional Features:
Approvals (V):
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Rated Voltage:
Sub-Category:
Terminal Finish:
Width (mm):
CM1683-02DE Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Sensitron Semiconductor
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Multicomp Pro
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
BLM21BB121SN1D
Murata Manufacturing
Murata Manufacturing's BLM21BB121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 100 MHz and DC resistance of 0.19 ohm, it offers output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and ferrite material construction.
FLT007A0Z
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Height: 12.2 mm; No. of Terminals: 5; Length: 25.41 mm; No. of Functions: 2;
BMB2A0060LN2
TE Connectivity's BMB2A0060LN2 is a 0805 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it offers 60 OHM output impedance and operates b/w -55 to 125 °C. Ideal for surface mount applications, this compact filter measures L2XB1.2XH.9 mm and is rated for 0.85 A current, making it suitable for noise suppression in high-frequency circuits up to 100 MHz.
744227S
Wuerth Elektronik & Kg
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
HI1812V101R-10
Laird Technologies
HI1812V101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C and has a DC resistance of 0.007 ohm. With dimensions of L4.5XB3.2XH1.4 (mm), it's ideal for applications requiring filtering in the frequency range of 25-1000 MHz at an output impedance of 125 OHM.
51-750-309
Api Technologies
51-750-309 by Api Technologies is a Data Line Filter with 70V rated voltage and 10A rated current. With a max insertion loss of 65dB, it is ideal for panel mount applications requiring high capacitance at 12000uF. Its compact size of 4.95mm diameter and 26.62mm height make it suitable for various electronic devices.
DLW5BTN102SQ2L
Murata's DLW5BTN102SQ2L is a Data Line Filter with 10 Mohm Insulation Resistance, 50V Rated Voltage, and 2A Rated Current. It has 4 terminals, operates b/w -40 to 85 °C, and offers an output impedance of 1000 ohm. Ideal for applications requiring noise suppression in data lines.
54-844-001
54-844-001 by Api Technologies is a UL/CSA approved data line filter with a rated voltage of 600V. Featuring a feed through capacitor, it offers max insertion loss of 50dB and capacitance of 4700uF. Ideal for panel mounting applications, this filter operates at temperatures up to 125°C.
ILHB1206ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .02 ohm; Rated Current: 6 A; Width (mm): 1.6; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Maximum Operating Temperature: 125 Cel;
7448263505
7448263505 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has two functions and an inductance of 500uH, making it suitable for applications requiring high current filtering and protection against electromagnetic interference.
782633601
Wurth Elektronik 782633601 is a surface mount data line filter with AEC-Q200 screening. Features include FERRITE BEAD filter type, 1A rated current, and 600Ω output impedance. Ideal for automotive applications requiring noise suppression in compact spaces.
HI3312X101R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .004 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 10 A;
BLM18AG102SN1D
Murata Manufacturing's BLM18AG102SN1D is a chip bead data line filter with 2 terminals, rated for 0.4A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 1000Ω at frequencies up to 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
FBMH3225HM601NT
Taiyo Yuden
Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.
MMZ2012R301ATD25
TDK
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
BLM31AF700SN1L
Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.
HZ0805E601R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .3 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: .5 A;
BLM18EG121SN1D
Murata Manufacturing's BLM18EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.04 ohm and an output impedance of 145 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.
MI0805J102R-10
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BLA31BD601SN4D
Murata Manufacturing's BLA31BD601SN4D is a FERRITE CHIP filter with 4 functions and 8 terminals. With dimensions of L3.2XB1.6XH0.8 (mm), it has a max operating temperature of 125°C and min of -55°C. Ideal for data line filtering applications, it offers a max DC resistance of 0.45 ohm and output impedance of 600 OHM at a rated current of 0.1 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CM1624-08DE
CM1624-08DE by Onsemi is a 4-function data line filter with a rated voltage of 2.5V, inductance of 0.02uH, and max DC resistance of 46 ohm. It operates b/w -40 to 85 °C and has dimensions of L3.4XB1.45XH0.55 (mm). Ideal for applications requiring efficient data line filtering in compact spaces.
CM1693-08DE
CM1693-08DE by Onsemi is a Data Line Filter with 8 functions and 16 terminals. It has an inductance of 0.026 uH, capacitance of 22 uF, and output impedance of 50 OHM. This surface mount filter operates b/w -40 to 85 °C and is ideal for IEC approved applications requiring noise suppression.
California Micro Devices
LOW PASS FILTER; Height: .5 mm; No. of Functions: 8; Mounting Type: SURFACE MOUNT; Width (mm): 1.35; Length: 3.3 mm;
CM1693-04DE
LOW PASS FILTER; No. of Functions: 4; Width (mm): 1.35; Mounting Type: SURFACE MOUNT; Length: 1.7 mm; Height: .5 mm;
CM1693-04DE by Onsemi is a 4-function data line filter with 8 terminals. It operates b/w -40 to 85°C, has an inductance of 0.026 uH, and output impedance of 50 ohm. Ideal for applications requiring a compact surface mount filter with dimensions L1.7xB1.35xH0.55 mm, such as electronic devices needing noise suppression on data lines.
CM1690-04DE
DATA LINE FILTER; Maximum DC Resistance: 8 ohm; Rated Current: .03 A; Approvals (V): IEC; No. of Terminals: 8; Length: 1.8 mm;
CM1631-06DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Maximum Operating Temperature: 85 Cel; Approvals (V): IEC; Output Impedance (ohm): 50 OHM; Width (mm): 1.45;
CM1690-08DE
DATA LINE FILTER; Maximum DC Resistance: 8 ohm; Rated Current: .03 A; Inductance: .012 uH; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
CM1692-04DE
DATA LINE FILTER; Maximum DC Resistance: 2.3 ohm; Rated Current: .03 A; JESD-609 Code: e3; Width (mm): 1.35; Dimensions: L1.7XB1.35XH0.55 (mm)/L0.067XB0.053XH0.022 (inch);
CM1620-08DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Maximum Operating Temperature: 85 Cel; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM; Capacitance: 17 uF;
CM1630-04DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Additional Features: PI-TYPE FILTER; Capacitance: 17 uF; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
CM1636-04DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Minimum Operating Temperature: -40 Cel; Dimensions: L1.8XB1.45XH0.55 (mm)/L0.071XB0.057XH0.022 (inch); Height: .55 mm; Output Impedance (ohm): 50 OHM;
CM1631-04DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; No. of Functions: 4; Minimum Operating Temperature: -40 Cel; Length: 1.8 mm;
CM1690-06DE
DATA LINE FILTER; Maximum DC Resistance: 8 ohm; Rated Current: .03 A; No. of Functions: 6; Minimum Insulation Resistance: 10 Mohm; Capacitance: 33 uF;
CM1636-06DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Additional Features: PI-TYPE CIRCUIT; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 50 OHM; Approvals (V): IEC;
CM1630-06DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Height: .55 mm; Minimum Operating Temperature: -40 Cel; Capacitance: 17 uF;
CM1636-08DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Mounting Type: SURFACE MOUNT; No. of Functions: 8; Length: 3.4 mm; JESD-609 Code: e3;
CM1681-02DE
DATA LINE FILTER; Maximum DC Resistance: 12 ohm; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel; Length: 2.1 mm; No. of Functions: 2;
CM1631-08DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; Length: 3.4 mm; Dimensions: L3.4XB1.45XH0.55 (mm)/L0.134XB0.057XH0.022 (inch); Mounting Type: SURFACE MOUNT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved