Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CM1620-08DE by Onsemi is a Data Line Filter with 8 functions and 16 terminals. It has a max operating temperature of 85 °C and DC resistance of 120 ohm. Ideal for IEC-approved applications requiring a compact filter with dimensions of L3.6xB1.3xH0.55 mm, it offers an output impedance of 50 ohm and capacitance of 17 uF for effective signal filtering in surface mount installations.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Native Components
$0.082
$0.079
Northwest PG Solutions
$0.091
$0.080
Kulean Microsystems
SupplyDigital Components
TANS Electronics
Problanco Electronics
Corphita
UHIMA Technologies
Corohmni
Having IEC approval ensures that this product meets international safety standards.
This product has multiple functions, providing comprehensive data line filtering.
With 16 terminals, this filter can effectively handle a variety of data line connections.
Being specifically designed as a data line filter ensures efficient filtering of data signals.
The high maximum operating temperature allows this filter to be used in a wide range of environments.
With a low minimum operating temperature, this filter can also be used in colder conditions without issues.
The compact width makes this filter easy to install in various electronic devices.
The low DC resistance helps in maintaining signal integrity while filtering unwanted noise.
The small length of this filter makes it suitable for space-constrained applications.
The output impedance of 50 ohms ensures compatibility with a wide range of devices and systems.
This packing method makes it easy to handle and store multiple filters efficiently.
The surface-mount design simplifies the installation process and saves space on the PCB.
The compact dimensions make this filter versatile and suitable for various applications.
The use of plastic as package material ensures durability and reliability of the filter.
The low height profile allows for easy integration even in slim electronic devices.
The capacitance value of 17uF aids in filtering out high-frequency noise from data lines effectively.
Data Line Filters CM1620-08DE attributes and parameters. Explore more Data Line Filters devices from Onsemi
Additional Features:
Approvals (V):
Capacitance:
Maximum DC Resistance:
Filter Type:
Height:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Package Material:
Packing Method:
Dimensions:
Sub-Category:
Width (mm):
CM1620-08DE Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Established in 1999, Onsemi is a leading global provider of power and image-sensing technologies. They are dedicated to building a better future for the automotive, industrial, cloud, medical, and IoT markets. Onsemi's core technologies include analog, digital, and mixed-signal products that offer innovative solutions for advanced automotive systems; highly reliable power management products for industrial applications; low-cost imaging solutions for medical equipment and consumer electronics; and robust communication architectures for the Internet of Things (IoT).
President, CEO
Hassane El-Khoury
Executive VP, CFO, Treasurer
Thad Trent
Senior VP
Ross F. Jatou
Aizu Fab
Fabrication
Fab Initiation
1995
Japan
Aizu Wakamatsu
Wafer Capacity
52,000
Si/EPI Fab
2018
Czech Republic
Rožnov pod Radhoštěm
10,000
Expansion Phase 1 for SiC / EPI
2019
14,500
Expansion Phase 2 for SiC / EPI
2024
SiC Fab
2022
USA
Hudson
Bucheon
2013
South Korea
61,000
ISMF - Malaysia
1990
Malaysia
Seremban
95,000
Roznov Device Fab
1987
80,000
Fab 10
2002
East Fishkill
15,000
Burlington
1986
Canada
Gresham
1998
45,000
Bucheon 150mm
2000
50,000
Rochester
1983
Nampa
Pennsylvania
1997
Mountain Top
36,000
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Surge Components
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Shandong Yiguang Electronic Joint Stock
Daco Semiconductor
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Gec Plessey Semiconductors
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
FLT007A0-SRZ
Ge Power Electronics
DATA LINE FILTER MODULE; Rated Current: 7 A; Approvals (V): UL; CSA; VDE; Packing Method: BAG; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel;
BLM21AG471SN1D
Murata Manufacturing
BLM21AG471SN1D by Murata Manufacturing is a chip bead data line filter with 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications in electronic devices.
1250F-003
Spectrum Control
DATA LINE FILTER; Maximum DC Resistance: .01 ohm; Rated Current: 10 A; Rated Voltage: 200 V; No. of Functions: 1; Additional Features: PI-TYPE CIRCUIT;
BLM18EG121SN1D
Murata Manufacturing's BLM18EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.04 ohm and an output impedance of 145 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.
742792645
Wuerth Elektronik & Kg
Wurth Elektronik 742792645 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for surface mount applications in electronics to achieve an output impedance of 470 OHM at a rated current of 1 A.
BLM21PG600SN1J
Murata Manufacturing's BLM21PG600SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for data line filtering applications, this ferrite chip is rated for a current of 3A and features tin terminal finish in surface mount packaging.
744228
Wurth Elektronik 744228 Data Line Filter has UL approval, rated voltage of 80V, and inductance of 25uH. With dimensions L9.2XB6.0XH5.0 (mm), it is ideal for noise filtering in data transmission applications with a max operating temperature of 125°C.
MMZ2012R301ATD25
TDK
MMZ2012R301ATD25 by TDK is a chip bead data line filter with AEC-Q200 screening. Featuring FERRITE CHIP technology, it has 2 terminals and operates b/w -55 to 125 °C. With dimensions of L2.0xB1.25xH0.85 (mm), it's ideal for automotive electronics and industrial applications due to its 300 OHM output impedance and 0.6A rated current capacity.
DLW31SN261SQ2L
Murata Manufacturing's DLW31SN261SQ2L is a data line filter with 2 functions, rated at 50V and 0.31A. It offers a max DC resistance of 0.5 ohm and an output impedance of 260 ohm. This surface mount filter operates b/w -40°C to 85°C, making it ideal for various electronic applications requiring noise suppression in data lines.
NFM21PC475B1A3D
Murata Manufacturing's NFM21PC475B1A3D is a data line filter with 100 Mohm insulation resistance, 10V rated voltage, and 4700000 uF capacitance. It is ideal for applications requiring noise suppression in electronic circuits.
CM1422-03CP
California Micro Devices
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Manufacturer Series: CM1422; Capacitance: 15 uF; Dimensions: L4.045XB1.503XH0.714 (mm)/L0.159XB0.059XH0.028 (inch);
ECMF02-4CMX8
STMicroelectronics
STMicroelectronics ECMF02-4CMX8 is a DATA LINE FILTER with 2 functions and 8 terminals. It has a max operating temp of 125°C, DC resistance of 4 ohm, and output impedance of 50 OHM. Ideal for applications requiring data line filtering in compact spaces due to its small dimensions (2.55mm x 1.25mm x 0.6mm).
742792037
Wurth Elektronik 742792037 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with a DC resistance of 0.08 ohm and output impedance of 330 OHM. Measuring L2.0XB1.2XH0.9 (mm), it has a max frequency of 250 MHz and rated current of 2 A, making it ideal for surface mount installations in electronic devices.
BLM18HD601SN1D
Murata Manufacturing's BLM18HD601SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers an output impedance of 600Ω and can handle frequencies from 100MHz to 1000MHz. Ideal for surface mount applications, this ferrite chip filter has a max DC resistance of 1.5Ω and rated current of 0.1A, making it suitable for noise suppression in electronic circuits.
FCFBMJ3216HS800-T
Taiyo Yuden
Taiyo Yuden's FCFBMJ3216HS800-T is a Ferrite Chip Data Line Filter with 2 terminals, 80 Ohm output impedance, and 4A rated current. Ideal for surface mount applications, it operates b/w -40°C to 85°C, offering low DC resistance of 0.01 ohm.
DLW21SN371SQ2L
Murata Manufacturing's DLW21SN371SQ2L is a data line filter with 2 functions, rated at 50V and 0.28A. It offers a min insulation resistance of 10 Mohm, operating b/w -40 to 85 °C. Ideal for applications requiring high impedance filtering in compact spaces.
BLM41PG181SN1L
BLM41PG181SN1L by Murata is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers 180 OHM output impedance, 0.025 ohm DC resistance, and supports frequencies from 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression.
MMZ1608B601C
The TDK MMZ1608B601C is a chip bead data line filter with FERRITE CHIP technology. It has a max operating temperature of 125°C and min of -55°C, with a rated current of 0.5A. Ideal for surface mount applications requiring an output impedance of 600 ohms in compact dimensions of L1.6xB0.8xH0.6 mm.
MPZ1608S102ATD25
TDK's MPZ1608S102ATD25 is a FERRITE CHIP filter with 2 terminals, rated for 0.8A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers 1000 ohm output impedance and operates b/w -55 to 125 °C. Ideal for data line filtering in surface mount applications.
LI0805H151R-10
Steward
FERRITE CHIP; Construction: Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CM1624-08DE
Onsemi
CM1624-08DE by Onsemi is a 4-function data line filter with a rated voltage of 2.5V, inductance of 0.02uH, and max DC resistance of 46 ohm. It operates b/w -40 to 85 °C and has dimensions of L3.4XB1.45XH0.55 (mm). Ideal for applications requiring efficient data line filtering in compact spaces.
CM1693-08DE
CM1693-08DE by Onsemi is a Data Line Filter with 8 functions and 16 terminals. It has an inductance of 0.026 uH, capacitance of 22 uF, and output impedance of 50 OHM. This surface mount filter operates b/w -40 to 85 °C and is ideal for IEC approved applications requiring noise suppression.
LOW PASS FILTER; Height: .5 mm; No. of Functions: 8; Mounting Type: SURFACE MOUNT; Width (mm): 1.35; Length: 3.3 mm;
CM1693-04DE
LOW PASS FILTER; No. of Functions: 4; Width (mm): 1.35; Mounting Type: SURFACE MOUNT; Length: 1.7 mm; Height: .5 mm;
CM1693-04DE by Onsemi is a 4-function data line filter with 8 terminals. It operates b/w -40 to 85°C, has an inductance of 0.026 uH, and output impedance of 50 ohm. Ideal for applications requiring a compact surface mount filter with dimensions L1.7xB1.35xH0.55 mm, such as electronic devices needing noise suppression on data lines.
CM1690-04DE
DATA LINE FILTER; Maximum DC Resistance: 8 ohm; Rated Current: .03 A; Approvals (V): IEC; No. of Terminals: 8; Length: 1.8 mm;
CM1631-06DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Maximum Operating Temperature: 85 Cel; Approvals (V): IEC; Output Impedance (ohm): 50 OHM; Width (mm): 1.45;
CM1690-08DE
DATA LINE FILTER; Maximum DC Resistance: 8 ohm; Rated Current: .03 A; Inductance: .012 uH; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
CM1692-04DE
DATA LINE FILTER; Maximum DC Resistance: 2.3 ohm; Rated Current: .03 A; JESD-609 Code: e3; Width (mm): 1.35; Dimensions: L1.7XB1.35XH0.55 (mm)/L0.067XB0.053XH0.022 (inch);
CM1630-04DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Additional Features: PI-TYPE FILTER; Capacitance: 17 uF; Mounting Type: SURFACE MOUNT; Output Impedance (ohm): 50 OHM;
CM1636-04DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Minimum Operating Temperature: -40 Cel; Dimensions: L1.8XB1.45XH0.55 (mm)/L0.071XB0.057XH0.022 (inch); Height: .55 mm; Output Impedance (ohm): 50 OHM;
CM1683-02DE
DATA LINE FILTER; Maximum DC Resistance: 1 ohm; Rated Voltage: 2.5 V; No. of Functions: 2; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 50 OHM;
CM1631-04DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; No. of Functions: 4; Minimum Operating Temperature: -40 Cel; Length: 1.8 mm;
CM1690-06DE
DATA LINE FILTER; Maximum DC Resistance: 8 ohm; Rated Current: .03 A; No. of Functions: 6; Minimum Insulation Resistance: 10 Mohm; Capacitance: 33 uF;
CM1636-06DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Additional Features: PI-TYPE CIRCUIT; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 50 OHM; Approvals (V): IEC;
CM1630-06DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Output Impedance (ohm): 50 OHM; Height: .55 mm; Minimum Operating Temperature: -40 Cel; Capacitance: 17 uF;
CM1636-08DE
DATA LINE FILTER; Maximum DC Resistance: 240 ohm; Mounting Type: SURFACE MOUNT; No. of Functions: 8; Length: 3.4 mm; JESD-609 Code: e3;
CM1681-02DE
DATA LINE FILTER; Maximum DC Resistance: 12 ohm; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -40 Cel; Length: 2.1 mm; No. of Functions: 2;
CM1631-08DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Packing Method: TAPE AND REEL; Length: 3.4 mm; Dimensions: L3.4XB1.45XH0.55 (mm)/L0.134XB0.057XH0.022 (inch); Mounting Type: SURFACE MOUNT;
CM1620-08DE
DATA LINE FILTER; Maximum DC Resistance: 120 ohm; Capacitance: 8.5 uF; Approvals (V): IEC; Width (mm): 1.3; Height: .55 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved