Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BLM31PG391SN1L is a 1206 chip bead filter with 2 terminals. It offers 390 ohm output impedance, -55 to 125°C operating temperature range, and 100 MHz frequency support. Ideal for data line filtering applications, this ferrite chip has matte tin over nickel finish and surface mounting type.
Median Price
$0.134
Lifecycle Status
Suppliers In-Stock
52
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.310
100+ parts
$0.152
1k+ parts
$0.091
10k+ parts
$0.079
DigiKey
$0.320
$0.155
$0.102
-
TTI Europe
$0.063
Arrow
Verical
TTI
$0.084
Future Electronics
$0.170
RS (Exports)
$0.121
$0.105
$0.097
Chip1Stop
$0.147
$0.086
$0.075
Newark
$0.151
$0.082
Farnell
$0.117
Element14
$0.174
$0.095
Greenchips
$0.068
$0.065
$0.061
$0.056
Nova Conductors
$0.127
DF Sales Co.
$0.160
Maritex
$0.281
$0.081
TME
$0.093
$0.089
Chip Stock
IBS Electronics
$0.125
Vyrian
LIBRA Elektronik GmbH
NAC Semi
$0.356
ComSIT Distribution GmbH
Semi Source
VNN
Rutronik
Connector Distribution Corp
Right Parts Inc.
Schukat
$0.119
Bristol Electronics
SIE Connect GmbH - GreenChips
Sea View Technologies
QIE Inc.
Sensible Micro Corp
Diverse Electronics
Contempo Components LLC
Cogito LLC
ACDS - Activité Composants Distribution Service
Lantek
Micros
$0.087
Partservice
$0.074
Electronic Treasures
Semtec, LLC
Holdelec - ElecDif-Pro
PC Components Company LLC
Micros sp.j. W. Kędra i J. Lic
$0.085
Legend Electronics Inc.
SPM Sales
Prism Electronics
Rebound Electronics
LWI Electronics Inc
Semicontronic
$0.054
$0.053
$0.052
Argo Parts USA
$0.096
Netroflash
$0.118
Corohmni
$0.131
Modulus Dynamics
Advanced Electronics
$0.135
$0.128
Continental Prestige Electronics
$0.098
$0.071
$0.066
Aztec Data Supply Inc.
$1.020
Eastek
$0.010
Perfect Parts
GreenTree Electronics
Abacus Technologies
Kepictronics
Legend Electronics Inc. (Excess)
iodParts Technologies Inc.
Robosynatics
Lucentia Tech
$0.126
Speed Components Ltd (Excess)
Cyclops Electronics Ltd (Excess)
FE SAS
Assy Fe
Chip beads are compact and effective in filtering out interference and noise, making this product suitable for applications where signal quality is crucial.
Having 2 terminals allows for easy and secure connection in the circuit, ensuring stable performance and reliability.
The 1206 case code indicates a standardized size, making it compatible with a wide range of circuit boards and designs.
With a high maximum operating temperature, this data line filter can withstand demanding environmental conditions without compromising its performance.
The low minimum operating temperature ensures that this filter remains functional even in cold environments, making it versatile and reliable.
The matte tin over nickel terminal finish provides excellent conductivity and corrosion resistance, ensuring long-term functionality and durability.
The compact width of 1.6 mm allows for easy integration into tight spaces or dense circuit layouts, making it suitable for compact electronic devices.
With a minimum frequency of 100 MHz, this filter can effectively suppress noise and interference across a wide range of frequencies, ensuring reliable signal quality.
The low maximum DC resistance of 0.05 ohm minimizes power loss and heat generation, improving the efficiency and performance of the filter.
The length of 3.2 mm provides a balance between compact size and effective filtering capabilities, making it suitable for various electronic applications.
With a maximum frequency of 100 MHz, this filter can effectively suppress noise and interference in high-speed data transmission, ensuring reliable signal integrity.
The output impedance of 390 ohms helps match the impedance of the filter with the surrounding circuit, optimizing signal transmission and reducing reflections.
The tape packing method ensures convenient handling and storage, making it easy to integrate these filters into production processes efficiently.
The surface mounting type allows for easy and secure attachment to circuit boards, improving reliability and simplifying assembly processes.
The compact dimensions make this filter suitable for space-constrained applications while providing effective noise suppression and signal filtering capabilities.
With a rated current of 2 A, this data line filter can handle moderate power levels while maintaining stable performance and reliable operation.
The low height of 1.1 mm allows for easy integration into slim electronic devices or crowded circuit layouts, making it versatile and suitable for various applications.
Made from ferrite material, this filter offers excellent electromagnetic interference suppression and signal filtering capabilities, ensuring high signal quality and reliability.
Data Line Filters BLM31PG391SN1L attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BLM31PG391SN1L Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
1554216002
Molex
WIRE AND CABLE;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
2N2222A
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
1552200253
NE555D
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
American Power Devices
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
ACM2012D-900-2P-T00
TDK
TDK's ACM2012D-900-2P-T00 is a FERRITE CHIP filter with 10 Mohm insulation resistance, 20V rated voltage, and 0.3A rated current. Ideal for data line applications due to its compact dimensions of L2.0xB1.2xH1.2 (mm) and surface mounting type.
MI0805K400R-10
Laird Technologies
MI0805K400R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 40 OHM. Ideal for surface mount applications in various electronic devices requiring noise suppression and signal filtering capabilities.
BLM21PG600SN1J
Murata Manufacturing
Murata Manufacturing's BLM21PG600SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125°C. With a width of 1.25mm and length of 2mm, it offers a max DC resistance of 0.025 ohm and output impedance of 60 ohm at frequencies up to 100 MHz. Ideal for data line filtering applications, this ferrite chip is rated for a current of 3A and features tin terminal finish in surface mount packaging.
FBMH3225HM601NT
Taiyo Yuden
Taiyo Yuden's FBMH3225HM601NT is a chip bead data line filter with 2 terminals. It operates b/w -40 to 85°C, offering 600 OHM impedance at 100 MHz. Ideal for surface mount applications, it measures L3.2xB2.5xH2.5 mm and has a max DC resistance of 0.042 ohm.
BLM21PG221SN1J
Murata Manufacturing's BLM21PG221SN1J is an 0805 chip bead filter with 2 terminals, operating from -55 to 125 °C. With a width of 1.25mm and length of 2mm, it offers an output impedance of 220 ohm for data line filtering applications at frequencies ranging from 100 MHz.
DLW21SN121SQ2L
Murata Manufacturing's DLW21SN121SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max operating temperature of 85°C and min insulation resistance of 10 Mohm. Ideal for applications requiring filtering in data lines, it has dimensions of L2.0xB1.2xH1.2 (mm) and operates at a rated current of 0.37A.
MI0805L301R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .06 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
MMZ1608Y102BTA00
TDK MMZ1608Y102BTA00 is a 0603 chip bead filter with max operating temp of 125°C and min of -55°C. With dimensions L1.6xB0.8xH0.8 (mm), it has a DC resistance of 0.5 ohm and output impedance of 1000 ohm, suitable for data line filtering applications.
BKP2125HS600-TV
BKP2125HS600-TV by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals, rated for 3A current. It offers a max DC resistance of 0.025 ohm and an output impedance of 60 ohm. Ideal for surface mount applications in electronics, it operates b/w -55 to 85 °C temperatures.
MPZ1608S601A
TDK's MPZ1608S601A is a FERRITE CHIP filter with 2 terminals, rated for 1A current. It offers low DC resistance of 0.15 ohm and output impedance of 600 ohm. Ideal for data line filtering in applications requiring compact surface mount components.
BNX023-01L
Murata Manufacturing's BNX023-01L is a data line filter with 2 functions and 4 terminals. It offers 35 dB attenuation at 1000 MHz, rated for 100 V and 20 A. Ideal for applications requiring noise suppression in data lines, it operates b/w -40 to 125 °C.
NUF2450MUT2G
Onsemi
NUF2450MUT2G by Onsemi is a Data Line Filter with 2 functions, 8 terminals, and inductance of 0.0023 uH. It operates b/w -40 to 85 °C and has a max DC resistance of 1.7 ohm. Ideal for applications requiring data line filtering in compact dimensions (L1.8XB1.2XH0.55 mm).
BLM21PG331SN1J
BLM21PG331SN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to provide impedance of 330 OHM at a rated current of 1 A.
BLM18SG221TN1D
Murata's BLM18SG221TN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. It offers a max DC resistance of 0.04 ohm and output impedance of 220 ohm at frequencies ranging from 100 MHz. This ferrite chip filter, measuring L1.6xB0.8xH0.5 mm, is ideal for surface mount applications in electronic circuits requiring noise suppression and signal filtering capabilities.
BLM15PX330SN1D
Murata Manufacturing's BLM15PX330SN1D is a FERRITE CHIP data line filter with 33 OHM output impedance, 1.7A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications in electronics to suppress electromagnetic interference.
FBMH1608HM600-T
Taiyo Yuden's FBMH1608HM600-T is a chip bead data line filter with 2 terminals, rated for 3A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications, this compact filter measures L1.6xB0.8xH0.8mm and is designed for frequencies up to 100MHz.
BLM21BB121SN1D
Murata Manufacturing's BLM21BB121SN1D is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 100 MHz and DC resistance of 0.19 ohm, it offers output impedance of 120 OHM. Ideal for data line filtering applications due to its compact size and ferrite material construction.
BLM21AG331SN1D
Murata Manufacturing's BLM21AG331SN1D is an 0805 chip bead data line filter with 2 terminals. Featuring a ferrite chip construction, it has a max operating temp of 125°C and min freq of 100 MHz. Ideal for surface mount applications, it offers an output impedance of 330 ohm and rated current of 0.7 A.
4400-076
Tusonix
FEED THROUGH CAPACITOR; Rated Current: 10 A; Manufacturer Series: 4400-076; Terminal Finish: Silver (Ag); Mounting Type: PANEL MOUNT; JESD-609 Code: e4;
PBY201209T-601Y-N
Pulse Electronics
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .1 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BLM31PG601SN1L
BLM31PG601SN1L by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55 to 125 °C, with dimensions of L3.2xB1.6xH1.1 mm and is used in surface mount applications for filtering frequencies up to 100 MHz.
BLM31PG121SN1L
Murata Manufacturing's BLM31PG121SN1L is a chip bead data line filter with 2 terminals, rated for 3A current. It offers 120 OHM output impedance, -55 to 125 °C operating temperature range, and 0.025 ohm DC resistance. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM31PG500SN1L
Murata Manufacturing's BLM31PG500SN1L is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of L3.2XB1.6XH1.1 (mm), it offers a max frequency of 100 MHz and DC resistance of 0.025 ohm. Ideal for applications requiring a 50 OHM output impedance, this ferrite chip filter is designed for surface mount installation in various electronic devices.
BLM31AF700SN1L
Murata Manufacturing's BLM31AF700SN1L is a Ferrite Chip Data Line Filter with 2 terminals, 70 Ohm output impedance, and 0.15 ohm max DC resistance. It operates b/w -55°C to 125°C, suitable for surface mount applications in various electronic devices requiring noise suppression.
BLM31AJ601SN1L
BLM31AJ601SN1L by Murata Manufacturing is a FERRITE CHIP data line filter with 1 function and 2 terminals. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This surface mount filter measures L3.2XB1.6XH1.1 (mm) and is commonly used for impedance matching in electronic circuits.
BLM31PG330SN1L
Murata Manufacturing's BLM31PG330SN1L is a chip bead data line filter with 2 terminals, rated for 6A current. With dimensions of L3.2xB1.6xH1.1 mm, it offers an output impedance of 33 ohm and operates b/w -55 to 125°C. Ideal for surface mount applications in filtering frequencies from 100 MHz with a max DC resistance of 0.01 ohm.
BLM31SN500SN1L
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
BLM31PG601SN1D
BLM31PG601SN1D by Murata is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600 OHM output impedance. Operating b/w -55 to 125 °C, it's ideal for data line filtering in surface mount applications due to its compact L3.2XB1.6XH1.1 (mm) dimensions and low DC resistance of 0.09 ohm.
BLM31PG601SN1
Murata Manufacturing's BLM31PG601SN1 is a FERRITE CHIP filter with 2 terminals, rated for 1.5A current and 600Ω output impedance. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55°C to 125°C, ideal for data line filtering in surface mount applications.
BLM31PG601SN1K
BLM31PG601SN1K by Murata is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. This ferrite chip filter comes in a compact 1206 case size for surface mounting method.
BLM31PG601SN1B
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
BLM31SN500SH1L
FERRITE CHIP; Maximum DC Resistance: .0016 ohm; Rated Current: 12 A; No. of Terminals: 2; Packing Method: TR, EMBOSSED, 7 INCH; No. of Functions: 1;
BLM31SN500SZ1L
FERRITE CHIP; Maximum DC Resistance: .0016 ohm; Rated Current: 12 A; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); Minimum Operating Temperature: -55 Cel; No. of Terminals: 2;
BLM31AJ260SN1L
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: .5 A; No. of Terminals: 2; Dimensions: L3.2XB1.6XH1.1 (mm)/L0.126XB0.063XH0.043 (inch); Height: 1.1 mm;
BLM31PG121SN1B
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .025 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
BLM31PG121SH1L
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .02 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 3 A;
BLM32A07PT
FERRITE CHIP; Maximum DC Resistance: 1 ohm; Rated Current: .2 A; No. of Functions: 1; Height: 1.1 mm; Mounting Type: SURFACE MOUNT;
BLM31PG391SN1B
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
BLM31KN102SN1L
FERRITE CHIP; Maximum DC Resistance: .075 ohm; Rated Current: 1.4 A; Maximum Operating Temperature: 125 Cel; No. of Functions: 1; No. of Terminals: 2;
BLM31PG391SN1J
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 2 A; Packing Method: TAPE AND REEL; Height: 1.1 mm; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved