Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Wurth Elektronik 744220 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 4.7uH and max DC resistance of 0.75 ohm, it's ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0 (mm).
Median Price
$2.630
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Farnell
1+ parts
$2.260
100+ parts
$1.280
1k+ parts
$1.260
10k+ parts
-
Chip1Stop
$1.950
$1.730
$1.520
Bürklin Elektronik
$2.440
$2.100
$1.940
Mouser Electronics
$2.620
$2.250
$1.920
DigiKey
$2.257
$2.090
RS Americas
$1.710
RS (Exports)
$2.631
$2.302
$2.074
Distrelec
$2.884
$2.187
Newark
$2.980
$2.610
$2.450
Freelance Electronics
$1.313
$1.379
$1.300
Greenchips
$1.588
$1.512
$1.440
Nova Conductors
$1.964
Chip Stock
Bristol Electronics
Atlantic Semiconductor
J2 Sourcing AB
Inventory MP
SIE Connect GmbH - GreenChips
Cyclops Electronics Ltd
EMSNET
ComSIT Distribution GmbH
VNN
Kruse Electronics AG
Kruse
Sensible Micro Corp
LIBRA Elektronik GmbH
PC Components Company LLC
Vyrian
Rebound Electronics
A2Z Electronics, Inc.
Prism Electronics
Advanced Electronics
$0.808
$0.735
$0.663
Ampacity Inc.
$1.560
Semicontronic
$1.760
$1.716
$1.707
Abianca Electronics
$1.873
$1.798
Continental Prestige Electronics
$1.921
$1.883
Argo Parts USA
Netroflash
$1.865
$1.826
Corohmni
$2.140
Aztec Data Supply Inc.
$2.950
GlobX GmbH
Perfect Parts
Kepictronics
Cyclops Electronics Ltd (Excess)
Having UL approval ensures that this data line filter meets necessary safety standards and regulations, providing peace of mind for the user.
A high rated voltage of 80V allows this data line filter to handle a wide range of voltage inputs, making it versatile and suitable for various applications.
With an inductance of 4.7uH, this data line filter effectively filters out unwanted noise and interference, ensuring clean data transmission.
The high maximum operating temperature of 125°C means this data line filter can withstand elevated temperatures without compromising its performance or longevity.
Compact dimensions of 9.2mm length, 6.0mm width, and 5.0mm height make this data line filter suitable for space-constrained applications, offering flexibility in installation.
The high output impedance of 20000 ohms helps to attenuate noise and maintain signal integrity, resulting in reliable data transmission.
Data Line Filters 744220 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
Inductance:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Dimensions:
Rated Current:
Rated Voltage:
Terminal Finish:
Width (mm):
744220 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
NSN
1290-99-798-9934, 1290997989934, 4210-14-328-1647, 4210143281647
NIIN
997989934, 143281647
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
General Semiconductor
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Siemens
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
RB6132-36-0M4
Schaffner Holding Ag
RB6132-36-0M4 by Schaffner Holding Ag is a Data Line Filter with 3 functions, rated voltage of 1000V, and inductance of 420uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0014 ohm. Ideal for applications requiring noise suppression in data lines with UL and IEC approvals.
NFM21PC104R1E3D
Murata Manufacturing
Murata Manufacturing's NFM21PC104R1E3D is a data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring noise filtering and signal conditioning.
BK1608HS601-TV
Taiyo Yuden
BK1608HS601-TV by Taiyo Yuden is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring an output impedance of 600 ohm, rated current of 0.35A, and surface mounting type.
74279262
Wuerth Elektronik & Kg
74279262 by Wurth Elektronik is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a max operating temperature of 125°C and min frequency of 100 MHz. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 120 OHM and rated current of 1.35 A, making it ideal for surface mount installations in electronic devices.
BLM18SG700TN1D
Murata's BLM18SG700TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. With dimensions of 1.6x0.8x0.5mm, it offers an output impedance of 70Ω and rated current of 4A. Ideal for surface mount applications, this ferrite chip filter has a max frequency of 100MHz, making it suitable for noise suppression in electronic circuits.
MMZ1005S601CT000
TDK
The TDK MMZ1005S601CT000 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1x0.5x0.5mm and a max operating temperature of 125°C, it offers low DC resistance of 0.6 ohm and output impedance of 600 ohm. This ferrite chip filter is suitable for use in electronic devices requiring noise suppression on data lines.
LI0805G301R-10
Laird Technologies
Laird Technologies' LI0805G301R-10 is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 mm, it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 300 ohm. Ideal for surface mount applications, it has a max DC resistance of 0.2 ohm and rated current of 0.7 A.
NUF2114MNT1G
NUF2114MNT1G by Onsemi is a Data Line Filter with 2 functions and 8 terminals. It has a max operating temperature of 85°C, DC resistance of 9.9 ohm, and output impedance of 50 ohm. Ideal for applications requiring data line filtering in compact spaces.
7122-RC
Bourns
The Bourns 7122-RC Data Line Filter has 2 functions, 4 terminals, and inductance of 25500 uH. With UL approval, it operates b/w -55°C to 105°C. Ideal for applications requiring a max current of 4A such as data line filtering.
ACT45B-220-2P-TL003
The TDK ACT45B-220-2P-TL003 is a FERRITE CHIP filter with 22uH inductance, 10 Mohm insulation resistance, and 0.25A rated current. Ideal for data line filtering applications due to its compact dimensions of L4.5XB3.2XH2.8 (mm) and surface mounting type.
744272221
Wurth Elektronik 744272221 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 220uH. It operates b/w -40°C to 125°C, has dimensions of L10.0xB8.7xH6.5 (mm), and is suitable for surface mount applications in electronics for impedance matching and noise filtering purposes.
MPZ2012S300AT000
TDK's MPZ2012S300AT000 is a chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, offering a max DC resistance of 0.01 ohm and output impedance of 30 ohm at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
FCFBMJ2125HS420-T
Taiyo Yuden's FCFBMJ2125HS420-T is a Ferrite Chip Data Line Filter with 2 terminals, 42 Ohm output impedance, and 4A rated current. It operates b/w -40°C to 85°C, has a max DC resistance of 0.008 ohm, and dimensions of L2.0xB1.25xH0.85 (mm). Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
ACM2012H-900-2P-T03
TDK's ACM2012H-900-2P-T03 is a data line filter with 10 Mohm min insulation resistance, 50V rated voltage, and 105°C max operating temp. Ideal for automotive applications due to AEC-Q200 screening level and compact dimensions of L2.0xB1.2xH1.2 mm.
NFM21PC474R1C3D
Murata Manufacturing's NFM21PC474R1C3D is a data line filter with 16V rated voltage, 470000uF capacitance, and 2A rated current. It features a feed through capacitor design for noise suppression in electronic circuits. Ideal for surface mount applications requiring high insulation resistance and low DC resistance.
742792043
Wurth Elektronik 742792043 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. Featuring multi-layer construction, it operates b/w -55 to 125 °C with a DC resistance of 0.65 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it has a max frequency of 190 MHz and output impedance of 600 OHM.
ACM7060-301-2PL-TL
The TDK ACM7060-301-2PL-TL is a data line filter with 2 functions, rated at 80V and 5A. It offers a min insulation resistance of 10 Mohm and operates b/w -25°C to 85°C. Ideal for applications requiring noise suppression in data lines with its compact dimensions of L7.0xB6.0xH3.5 mm.
742792625
Wurth Elektronik 742792625 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It has dimensions of L1.6xB0.8xH0.8 mm and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring output impedance of 120 ohm.
DLW31SN222SQ2L
Murata Manufacturing's DLW31SN222SQ2L is a Data Line Filter with 2 functions, rated at 50V. It offers a max DC resistance of 1.2 ohm and an output impedance of 2200 ohm. This surface mount filter operates b/w -40 to 85 °C and is ideal for applications requiring high insulation resistance.
ACM2012H-900-2P-T05
ACM2012H-900-2P-T05 by TDK is a data line filter with 2 functions, rated voltage of 20V, and max operating temp of 85°C. It has a min insulation resistance of 10 Mohm and is ideal for applications requiring noise suppression in electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
744232090
Wurth Elektronik
Wurth Elektronik 744232090 Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 125°C. Ideal for applications requiring surface mount filters with dimensions L3.2xB1.6xH1.9mm in tape and reel packaging.
744242220
Wurth Elektronik 744242220 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 22uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.23 ohm. Ideal for applications requiring filtering on data lines with UL approval.
744231091
Wurth Elektronik 744231091 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temperature of 125°C. It has 4 terminals, tin finish, and dimensions of L2.0xB1.2xH1.2 (mm). Ideal for applications requiring filtering in data lines with a current rating of 0.37A.
744227S
744227S by Wurth Elektronik is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. It operates b/w -40°C to 125°C, has a max DC resistance of 0.16 ohm, and output impedance of 5500 ohm. Ideal for surface mount applications requiring a compact L9.2xB6.0xH5.0mm size and rated current of 1A.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
744230900
Wurth Elektronik 744230900 is a Data Line Filter with 2 functions, rated voltage of 50V, and max operating temp of 105°C. Ideal for surface mount applications, it has dimensions of L1.6xB0.85xH1.1 (mm) and output impedance of 90 ohm.
744232222
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
744227
Wurth Elektronik 744227 is a UL-approved data line filter with 2 functions, rated at 80V and inductance of 51uH. Ideal for applications requiring surface mount filters with dimensions of L9.2xB6.0xH5.0mm, it operates b/w -40°C to 125°C and has a max DC resistance of 0.16 ohm.
744226S
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Output Impedance (ohm): 920 OHM; Width (mm): 6.0; No. of Terminals: 4;
744242510
Wurth Elektronik 744242510 is a Data Line Filter with UL approval, rated voltage of 80V, and inductance of 51uH. It has 2 functions, operates b/w -40°C to 125°C, and offers a max DC resistance of 0.32 ohm. This filter is ideal for applications requiring noise suppression in data lines.
744272471
DATA LINE FILTER; Maximum DC Resistance: .065 ohm; Rated Current: 1.6 A; Mounting Type: SURFACE MOUNT; Length: 10 mm; Packing Method: TAPE AND REEL;
744223
Wurth Elektronik 744223 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 500uH and max DC resistance of 0.15 ohm, it's ideal for applications requiring output impedance of 3300 OHM. This surface mount filter operates b/w -40 to 125 °C, making it suitable for various electronic devices.
744273501
Wurth Elektronik 744273501 is a Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 5uH. It operates b/w -40°C to 125°C, has Tin/Copper terminals, and dimensions of L9.5xB8.3xH5.3mm. Ideal for applications requiring a max current of 5A and output impedance of 500Ω in surface mount configurations.
744224
Wuerth Elektronik & Kg 744224 Data Line Filter with 2 functions, rated voltage of 80V, and inductance of 250uH. UL approved for applications requiring output impedance of 1800 ohm and rated current of 1.2A. Ideal for surface mount installations in electronics to filter data lines efficiently.
744220203
Wurth Elektronik 744220203 is a Data Line Filter with 2 functions and rated voltage of 80V. It has inductance of 20000uH, max operating temp of 125°C, and DC resistance of 2.6 ohm. Ideal for applications requiring noise suppression in data lines with approval from IEC standards.
744226
DATA LINE FILTER; Maximum DC Resistance: .08 ohm; Rated Current: 1.6 A; Width (mm): 6.0; No. of Functions: 2; Inductance: 10 uH;
744220103
DATA LINE FILTER; Maximum DC Resistance: 1.2 ohm; Rated Current: .35 A; No. of Terminals: 4; Packing Method: TR, EMBOSSED, 13 INCH; Height: 5 mm;
744231371
DATA LINE FILTER; Maximum DC Resistance: .45 ohm; Rated Current: .28 A; Terminal Finish: Tin (Sn); Rated Voltage: 50 V; No. of Terminals: 4;
744272121
Wurth Elektronik 744272121 is a Data Line Filter with 2 functions, rated at 80V. It has inductance of 120uH and operates b/w -40 to 125°C. Ideal for applications requiring filtering of data lines, it offers low DC resistance of 0.025 ohm and output impedance of 460Ω.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved