Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FERRITE CHIP; Maximum DC Resistance: .08 ohm; Rated Current: 2.1 A; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; No. of Functions: 1;
Median Price
$0.278
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.078
100+ parts
-
1k+ parts
10k+ parts
Distrelec
$0.240
Adafruit Industries
$0.249
$0.237
Bürklin Elektronik
$0.292
$0.262
$0.220
Mouser Electronics
$0.340
$0.285
$0.215
DigiKey
Newark
$0.380
$0.325
$0.277
Element14
$0.469
$0.378
$0.353
RS (Exports)
$0.223
Farnell
$0.222
Chip1Stop
$0.052
Nova Conductors
Cyclops Electronics Ltd
Chip Stock
Sensible Micro Corp
ComSIT Distribution GmbH
ComSIT USA
Vyrian
NexGen Digital
Masline Electronics Inc.
LIBRA Elektronik GmbH
Quantum Digital Technology
Bristol Electronics
ACDS - Activité Composants Distribution Service
VNN
SPM Sales
Ampacity Inc.
$0.044
Semicontronic
$0.043
Argo Parts USA
$0.232
$0.225
Corohmni
$0.242
Advanced Electronics
Aztec Data Supply Inc.
$2.861
Metaverse IC Inc.
Kepictronics
GlobX GmbH
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
$0.213
$0.185
$0.169
GreenTree Electronics
Perfect Parts
Data Line Filters 74279220601 attributes and parameters. Explore more Data Line Filters devices from Wurth Elektronik
Approvals (V):
Maximum DC Resistance:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Rated Current:
Terminal Finish:
Width (mm):
74279220601 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Würth Elektronik is one of the most successful companies within the Würth Group. The Würth Elektronik Group is the preferred partner of many developers and manufacturers from a wide range of industries. With its electronic and electromechanical components, printed circuit boards, and intelligent power and control systems, Würth Elektronik stands for innovative solutions, top quality, and outstanding service that goes far beyond the ordinary – in line with our motto: “more than you expect!”.
BAV99
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 240; Terminal Finish: TIN LEAD;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
BLM31SN500SN1L
Murata Manufacturing
Murata Manufacturing's BLM31SN500SN1L is a FERRITE CHIP filter with 2 terminals, rated for 10A current. With dimensions of L3.2xB1.6xH1.1 mm, it operates b/w -55 to 125 °C and has a max DC resistance of 0.0021 ohm. Ideal for data line filtering applications due to its 50 OHM output impedance and surface mounting type.
HI0805R800R-10
Steward
FERRITE CHIP; Construction: Chip Bead; Maximum DC Resistance: .01 ohm; Maximum Frequency: 1000 MHz; Material: Ferrite; Rated Current: 5 A;
742792641
Wuerth Elektronik & Kg
Wurth Elektronik 742792641 is a multi-layer ferrite chip filter with AEC-Q200 approval. It operates b/w -55 to 125 °C, has 2 terminals, and offers an output impedance of 300 ohm. Ideal for data line filtering applications in automotive electronics due to its compact size (1.6x0.8x0.8 mm) and high frequency range (100-250 MHz).
NFM21PS106B0J3D
Murata Manufacturing's NFM21PS106B0J3D is a data line filter with 4 terminals, rated at 6.3V and 4A. Featuring a feed-through capacitor type, it offers high insulation resistance of 50 Mohm. Ideal for applications requiring filtering capabilities in electronic circuits operating b/w -40°C to 85°C.
PA4339.102NLT
Pulse Electronics
PA4339.102NLT by Pulse Electronics is a Data Line Filter with 2 functions, AEC-Q200 screening level, and 80V rated voltage. It has an inductance of 8uH and operates b/w -40°C to 125°C. Ideal for applications requiring surface mount filters with a max current rating of 3A.
74279265
Wurth Elektronik 74279265 is a 0603 multi-layer FERRITE CHIP filter with dimensions of L1.6xB0.8xH0.8 mm. It has a max operating temp of 125°C, min freq of 100 MHz, and DC resistance of 0.45 ohm. Ideal for data line filtering applications due to its surface mounting type and ferrite material construction.
BLM18SG121TN1
Murata Manufacturing's BLM18SG121TN1 is a FERRITE CHIP data line filter with 120 OHM output impedance, 3A rated current, and -55 to 125 °C operating temperature range. Ideal for surface mount applications requiring effective noise suppression in electronic circuits.
SRF0905-501Y
Bourns
Bourns SRF0905-501Y is a 2-function data line filter with inductance of 500uH and rated current of 1A. It operates b/w -40 to 105°C, has a max DC resistance of 0.15 ohm, and output impedance of 1000 ohm. Ideal for surface mount applications in electronics for noise filtering and signal conditioning.
PCMF1USB3SZ
The Nexperia PCMF1USB3SZ is a 5V data line filter with 5 terminals, IEC approval, and -40 to 85°C operating temperature range. It has a compact size of L1.22xB0.82xH0.6 mm and capacitance of 0.25uF. Ideal for applications requiring noise filtering in USB data lines.
BNX022-01
Murata Manufacturing's BNX022-01 is a 3-function data line filter with 500 Mohm insulation resistance and 50 V rated voltage. With max insertion loss of 35 dB, it operates b/w -40 to 125 °C and has a rated current of 10 A. Ideal for surface mount applications requiring effective noise filtering in data lines.
BLM21PG220SN1D
BLM21PG220SN1D by Murata is an 0805 chip bead filter with 2 terminals. It operates b/w -55 to 125 °C and has a DC resistance of 0.01 ohm. With dimensions of L2.0XB1.25XH0.85 (mm), it's ideal for data line filtering applications at frequencies ranging from 100 MHz, offering an output impedance of 22 OHM and a rated current of 6 A.
BKP1608HS391-TV
Taiyo Yuden
Taiyo Yuden's BKP1608HS391-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 390 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, it operates b/w -55 to 85 °C in surface mount installations.
BLM18EG101TN1D
Murata's BLM18EG101TN1D is a chip bead data line filter with 2 terminals, operating from -55 to 125°C. It offers a DC resistance of 0.045 ohm, output impedance of 140Ω, and rated current of 2A. Ideal for surface mount applications in filtering frequencies from 100MHz to 1000MHz.
SRF2012A-900YA
Bourns SRF2012A-900YA is a data line filter with 2 functions, rated at 50V. It offers a max operating temperature of 125°C and min insulation resistance of 10 Mohm. Ideal for applications requiring surface mount filters with dimensions of L2.0xB1.2xH1.2 (mm).
742792640
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
742792023
Wurth Elektronik 742792023 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It has a width of 1.2mm, length of 2mm, and height of 0.9mm. With an output impedance of 120 ohm, it operates b/w -55 to 125 °C and supports frequencies from 100 MHz to 250 MHz.
742792410
Wurth Elektronik 742792410 is a multi-layer FERRITE CHIP filter with dimensions L4.5XB1.6XH1.6 (mm). It operates b/w -55 to 125 °C, has a DC resistance of 0.01 ohm, and output impedance of 60 OHM. Ideal for data line filtering applications with a frequency range from 100 MHz to 1000 MHz.
FBMJ4516HS111-T
FBMJ4516HS111-T by Taiyo Yuden is a chip bead data line filter with 1 function and 2 terminals. It has a max operating temperature of 85°C and a min frequency of 100 MHz. This filter is commonly used in applications requiring noise suppression in electronic circuits.
MPZ2012S300AT
TDK
The TDK MPZ2012S300AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.01 ohm and output impedance of 30Ω. Ideal for data line filtering applications due to its compact size (L2.0xB1.25xH0.85 mm) and high rated current of 6A.
7448262013
Wurth Elektronik 7448262013 Data Line Filter has UL approval, rated voltage of 250V, and inductance of 1300uH. With dimensions L43.5xB23.5xH43.0 (mm), it is ideal for applications requiring a max operating temperature of 125°C and min of -40°C, rated current up to 20A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
742792040
Wurth Elektronik
Wurth Elektronik 742792040 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a DC resistance of 0.15 ohm. Ideal for applications requiring noise suppression in circuits operating at frequencies ranging from 100 MHz to 150 MHz.
742792651
Wurth Elektronik 742792651 is a surface mount data line filter with AEC-Q200 screening. Featuring multi-layer construction, it has 2 terminals and FERRITE BEAD filter type. With dimensions of L1.6xB0.8xH0.8 mm, it operates b/w -55 to 125°C and offers an output impedance of 600 ohm for applications requiring noise suppression in automotive electronics.
742792031
Wurth Elektronik 742792031 is a FERRITE CHIP filter with 2 terminals, rated for 3A current. With dimensions of L2.0XB1.25XH0.9 (mm), it operates b/w -55 to 125 °C and has an output impedance of 300 OHM. Ideal for data line filtering applications due to its surface mount construction and frequency range of 100-200 MHz.
742792662
Wurth Elektronik 742792662 is a FERRITE CHIP data line filter with max operating temp of 125°C and min of -55°C. It has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. With an output impedance of 1000Ω, it's ideal for surface mount applications in electronics to reduce electromagnetic interference.
742792141
Wurth Elektronik 742792141 is a multi-layer data line filter with FERRITE CHIP construction. Operating b/w -55 to 125 °C, it offers 90-100 MHz frequency range and 1 A rated current. Ideal for surface mount applications, providing 1000 OHM output impedance for noise suppression in electronic circuits.
742792664
Wurth Elektronik 742792664 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of 1.6x0.8x0.8 mm and operating temperatures from -55 to 125 °C, it offers a max frequency of 120 MHz and DC resistance of 0.6 ohm, making it ideal for surface mount installations in high-frequency circuits.
742792097
Wuerth Elektronik & Kg 742792097 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm at a frequency range of 70-100 MHz. Ideal for surface mounting, it offers an output impedance of 1500 OHM and can handle a rated current of 1 A efficiently.
74279266
Wurth Elektronik 74279266 is a AEC-Q200 compliant data line filter with multi-layer construction. Featuring FERRITE CHIP technology, it operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L1.6XB0.8XH0.8 (mm), it is ideal for surface mount applications in automotive electronics requiring high impedance filtering up to 140 MHz.
742792663
Wurth Elektronik 742792663 is a 0603 multi-layer FERRITE CHIP filter with dimensions L1.6XB0.8XH0.8 (mm). It operates b/w -55 to 125 °C, has a max frequency of 150 MHz, and DC resistance of 0.85 ohm. Ideal for data line filtering applications due to its surface mount design and output impedance of 1000 OHM.
742792116
Wuerth Elektronik & Kg 742792116 is a FERRITE CHIP filter with 2 terminals, rated for 2.5A current and output impedance of 500 ohm. Ideal for data line filtering applications, it operates b/w -55 to 125 °C, with dimensions L3.2xB1.6xH1.1 mm and surface mounting type.
742792022
Wurth Elektronik 742792022 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it has a max operating temperature of 125 °C and output impedance of 220 OHM at a frequency range from 100 MHz to 300 MHz. Ideal for surface mounting type, it offers low DC resistance (0.05 ohm) and rated current of 2 A in TAPE AND REEL packing method.
7427927311
FERRITE CHIP; Maximum DC Resistance: .09 ohm; Rated Current: 1.2 A; Maximum Operating Temperature: 125 Cel; Length: 1 mm; Minimum Operating Temperature: -55 Cel;
74279226101
Wurth Elektronik 74279226101 is a chip bead data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has 2 terminals, and measures L4.5XB3.2XH2.3 (mm). With a max frequency of 1100 MHz and output impedance of 100 OHM, it's ideal for surface mount applications in electronics requiring noise suppression at frequencies up to 100 MHz.
742792093
Wurth Elektronik 742792093 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C and has a DC resistance of 0.6 ohm. With dimensions of L2.0XB1.2XH0.9 (mm), it offers an output impedance of 2200 OHM at frequencies ranging from 80-100 MHz.
74279218
Wurth Elektronik 74279218 is a multi-layer FERRITE CHIP filter with dimensions L3.2XB1.6XH1.1 (mm). It has a max operating temperature of 125°C and min frequency of 90 MHz, suitable for data line filtering applications in surface mount configurations.
742792602
Wurth Elektronik 742792602 is a multi-layer FERRITE CHIP filter with 2 terminals, suitable for data line applications. It operates b/w -55 to 125 °C, with dimensions of L1.6xB0.8xH0.8 mm and output impedance of 60 ohm at frequencies ranging from 100 MHz to 600 MHz.
742792653
FERRITE CHIP; Construction: Multi-Layer; Maximum DC Resistance: .65 ohm; Maximum Frequency: 200 MHz; Material: Ferrite; Rated Current: .5 A;
742792625
Wurth Elektronik 742792625 is a FERRITE CHIP Data Line Filter with 2 terminals, rated for 2A current. It has dimensions of L1.6xB0.8xH0.8 mm and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring output impedance of 120 ohm.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved