Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BKP1608HS121-T by Taiyo Yuden is a 0603 multilayer chip data line filter with 2 terminals. Featuring ferrite chip construction, it has a max operating temp of 85°C and min freq of 100 MHz. Ideal for applications requiring a compact surface mount filter with an output impedance of 120 ohm.
Median Price
-
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Sensible Micro Corp
1+ parts
100+ parts
1k+ parts
10k+ parts
Cyclops Electronics Ltd
Bristol Electronics
Vyrian
Semi Source
Chip Stock
VNN
Prism Electronics
SPM Sales
Nova Conductors
A2Z Electronics, Inc.
Elcom Components
Semicontronic
$0.400
$0.390
$0.388
Aztec Data Supply Inc.
$0.560
Advanced Electronics
$0.932
$0.848
$0.764
Corohmni
$1.573
Ampacity Inc.
$4.400
AZTECH Wire
$18.432
BidChips
Futuretech Components
Authorized Procurement Solutions
Argo Parts USA
Continental Prestige Electronics
Robosynatics
Lucentia Tech
Bastille Electronics
Multilayer chip construction allows for efficient filtering and compact size, making it ideal for space-constrained applications.
Having 2 terminals simplifies installation and connection, reducing the chance of errors.
0603 case code is a standard size, making it compatible with a wide range of circuit boards and applications.
Ferrite chip filters are effective in reducing electromagnetic interference, ensuring clean and reliable signal transmission.
With a high maximum operating temperature, this filter can withstand demanding environments without compromising performance.
Low minimum operating temperature ensures the filter remains functional even in extreme cold conditions.
Tin over nickel terminal finish provides excellent corrosion resistance and solderability, prolonging the lifespan of the filter.
Slim width allows for easy integration into compact designs without adding bulk.
Efficiently filters out noise and interference at frequencies as low as 100 MHz, ensuring signal integrity.
Low DC resistance minimizes power loss and heat generation, improving overall efficiency.
Compact length ensures the filter takes up minimal space while still delivering optimal performance.
Filters out noise and interference effectively up to 100 MHz, maintaining signal clarity.
Output impedance of 120 ohms matches standard impedance levels, reducing signal reflections and distortion.
Tape and reel packaging allows for easy handling, storage, and automated assembly, improving overall efficiency.
Surface mount installation simplifies assembly and offers a secure connection, ideal for modern electronic designs.
Compact dimensions make this filter versatile and suitable for various applications without compromising performance.
High rated current of 2.7 A allows the filter to handle heavy loads without overheating or performance degradation.
Low profile height saves space and enables installation in slim devices or crowded PCB layouts.
Ferrite material provides excellent electromagnetic interference suppression, ensuring clean and reliable signal transmission.
Data Line Filters BKP1608HS121-T attributes and parameters. Explore more Data Line Filters devices from Taiyo Yuden
Case Code:
Construction:
Maximum DC Resistance:
Filter Type:
Maximum Frequency:
Minimum Frequency:
Height:
JESD-609 Code:
Length:
Material:
Mounting Type:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Rated Current:
Sub-Category:
Terminal Finish:
Width (mm):
BKP1608HS121-T Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 25/Feb/2021
Taiyo Yuden Co., Ltd. engages in manufacture and sale of electronic components. Its products include ceramic capacitors, inductors, noise suppression components, multilayer ceramic devices, chip antennas, and wireless modules. The company was founded by Hikohachi Sato on March 23, 1950 and is headquartered in Tokyo, Japan.
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
2N2222A
Ksl Microdevices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
4554
Jw Miller Magnetics
Other Semiconductors;
LM358N
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
STM32F407VGT6
STMicroelectronics
STM32F407VGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 196608 bytes RAM, and 16-Ch 12-Bit ADC channels. It is ideal for industrial applications requiring CAN, ETHERNET, I2C(3), SPI(3), UART(2), USB(2) connectivity and features DMA(16) for efficient data transfer. With a max clock frequency of 50 MHz and operating temperature range of -40 to 85 °C, it offers high performance in a compact package style (14mm x 14mm).
ULN2803ADWR
Texas Instruments
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
NDT2955
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
1N4148
Rochester Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
744228
Wuerth Elektronik & Kg
Wurth Elektronik 744228 Data Line Filter has UL approval, rated voltage of 80V, and inductance of 25uH. With dimensions L9.2XB6.0XH5.0 (mm), it is ideal for noise filtering in data transmission applications with a max operating temperature of 125°C.
742792640
Wurth Elektronik 742792640 is a multi-layer data line filter with FERRITE CHIP construction. It operates b/w -55 to 125 °C, has a DC resistance of 0.35 ohm, and output impedance of 300 OHM. Ideal for surface mount applications in electronics to filter frequencies from 100 MHz to 250 MHz.
ACT1210L-201-2P-TL00
TDK
The TDK ACT1210L-201-2P-TL00 is a data line filter with 2 functions, rated at 80V and -40 to 125°C operating temperature range. It has 4 terminals, insulation resistance of 10 Mohm, and DC resistance of 5.5 ohm. Ideal for automotive applications due to AEC-Q200 screening level compliance.
BLM18HE152SN1J
Murata Manufacturing
Murata Manufacturing's BLM18HE152SN1J is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. With dimensions of 1.6x0.8x0.8 mm, it offers a frequency range from 100 MHz to 1000 MHz and an output impedance of 1500 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
BLM18KG601SN1D
Murata Manufacturing's BLM18KG601SN1D is a chip bead data line filter with 2 terminals, FERRITE CHIP type, and 0.8mm width. Operating b/w -55 to 125 °C, it has a DC resistance of 0.15 ohm and output impedance of 600 OHM. Ideal for surface mount applications in electronics for noise suppression at frequencies ranging from 100 MHz.
FBMH3225HM601NT8
Taiyo Yuden
Taiyo Yuden's FBMH3225HM601NT8 is a Ferrite Chip Data Line Filter with 2 terminals, 600 Ohm output impedance, and 3A rated current. It operates b/w -40°C to 125°C, measures 3.2mm in length, and is ideal for surface mount applications requiring noise suppression in electronic circuits.
1806J0500204MXTE07
Knowles Precision Devices
1806J0500204MXTE07 by Knowles Precision Devices is a feed through capacitor with 50V rated voltage, 200000uF capacitance, and 2A rated current. It is used in data line filters for applications requiring high insulation resistance and operating temperatures ranging from -55 to 85°C.
744235110
Wurth Elektronik 744235110 is a Data Line Filter with 2 functions, AEC-Q200 screening. It has a rated voltage of 60V, inductance of 11uH, and max operating temp of 125°C. Ideal for applications requiring noise suppression in automotive electronics.
STF202-22T1G
STF202-22T1G by Onsemi is a Data Line Filter with 2 functions and 6 terminals. It operates b/w -55°C to 125°C, has a max DC resistance of 24 ohm, and capacitance of 68 uF. This surface mount filter is IEC approved and commonly used in applications requiring data line filtering.
NFM21PC104R1E3D
Murata Manufacturing's NFM21PC104R1E3D is a data line filter with 1000 Mohm insulation resistance, 25V rated voltage, and 100000 uF capacitance. It is a feed through capacitor used in applications requiring noise filtering and signal conditioning.
MPZ1608S221ATA00
The TDK MPZ1608S221ATA00 is a 0603 chip bead data line filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for surface mount applications, it provides an output impedance of 220 ohms and rated current of 2.2A in a compact size of L1.6xB0.8xH0.8 (mm).
MPZ1608S601AT
TDK's MPZ1608S601AT is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, this ferrite chip has a DC resistance of 0.15 ohm and output impedance of 600 OHM.
BLM18BB100SN1D
Murata's BLM18BB100SN1D is a chip bead data line filter with 2 terminals, operating b/w -55°C to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a max frequency of 100MHz and DC resistance of 0.1 ohm. Ideal for surface mount applications, it provides an output impedance of 10Ω, making it suitable for noise suppression in electronic circuits.
MPZ1608B471AT
The TDK MPZ1608B471AT is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.15 ohm, and an output impedance of 470 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100 MHz.
BLM18EG121SN1D
Murata Manufacturing's BLM18EG121SN1D is a chip bead data line filter with 2 terminals, operating b/w -55 to 125°C. With dimensions of 1.6x0.8x0.8mm, it offers a DC resistance of 0.04 ohm and an output impedance of 145 ohm for frequencies ranging from 100 MHz to 1000 MHz. Ideal for surface mount applications, this ferrite chip filter has a rated current of 2A and is commonly used in electronic devices requiring noise suppression on data lines.
742792097
Wuerth Elektronik & Kg 742792097 is an AEC-Q200 rated FERRITE CHIP filter with 2 terminals, suitable for data line applications. With dimensions of L2.0XB1.2XH0.9 (mm), it operates b/w -55 to 125 °C and has a DC resistance of 0.3 ohm at a frequency range of 70-100 MHz. Ideal for surface mounting, it offers an output impedance of 1500 OHM and can handle a rated current of 1 A efficiently.
MMZ1608B121CTAH0
The TDK MMZ1608B121CTAH0 is a chip bead data line filter with 1 function, FERRITE CHIP construction, and 2 terminals. It operates b/w -55°C to 125°C, has a max DC resistance of 0.15 ohm, and an output impedance of 120 OHM. Ideal for surface mount applications in electronics for noise suppression and signal filtering.
BK1608HS601-T
BK1608HS601-T by Taiyo Yuden is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a max frequency of 100 MHz, DC resistance of 0.45 ohm, and output impedance of 600 OHM. Ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
MI0805K400R-10
Laird Technologies
MI0805K400R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it offers a frequency range from 25 MHz to 1000 MHz and an output impedance of 40 OHM. Ideal for surface mount applications in various electronic devices requiring noise suppression and signal filtering capabilities.
MPZ2012S331AT000
The TDK MPZ2012S331AT000 is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.05 ohm, it is ideal for applications requiring noise suppression in electronic circuits. This surface mount filter has dimensions of L2.0xB1.25xH0.85 (mm) and is commonly used in telecommunications equipment.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BKP1005HS121-TV
Taiyo Yuden's BKP1005HS121-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.0xB0.5xH0.5 (mm), it offers an output impedance of 120 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, this surface mount device operates b/w -55 to 85 °C temperatures.
BKP1005HS121-T
BKP1005HS121-T by Taiyo Yuden is a 0402 multilayer chip data line filter with 2 terminals. It operates b/w -55 to 85 °C, has a DC resistance of 0.14 ohm, and output impedance of 120 OHM at 100 MHz. Ideal for surface mount applications in electronics requiring noise suppression and signal filtering.
BKP1005HS121-T8
BKP1005HS121-T8 by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of 1mm length, 0.5mm width, and 0.5mm height, it offers an output impedance of 120Ω and rated current of 1A. Ideal for surface mount applications in various electronic devices requiring noise suppression.
BKP1608HS101-T
BKP1608HS101-T by Taiyo Yuden is a multilayer chip data line filter with 2 terminals. It has a max operating temperature of 85°C and a min operating temperature of -55°C. This ferrite chip filter has a width of 0.8mm, length of 1.6mm, and height of 0.8mm. It is commonly used for noise suppression in electronic devices such as smartphones and tablets.
BKP1608HS121-TV
FERRITE CHIP; Maximum DC Resistance: .035 ohm; Rated Current: 2.7 A; Output Impedance (ohm): 100 OHM; Minimum Operating Temperature: -55 Cel; Width (mm): 0.8;
BKP1608HS391-TV
Taiyo Yuden's BKP1608HS391-TV is a FERRITE CHIP filter with 2 terminals, rated for 1A current. With dimensions of L1.6xB0.8xH0.8 (mm), it offers an output impedance of 390 ohm and max DC resistance of 0.14 ohm. Ideal for data line filtering applications, it operates b/w -55 to 85 °C in surface mount installations.
BKP1005HS221-TV
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .8 A; Packing Method: TR, PAPER; No. of Functions: 1; Additional Features: AEC-Q200;
BKP1005HS221-T
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .2 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: .8 A;
BKP1608HS391-T
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .14 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BKP1608HS101-TV
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 1.7 A; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -55 Cel;
BKP1005HM121-T
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .12 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.1 A;
BKP1005HS221-T8
FERRITE CHIP; Maximum DC Resistance: .2 ohm; Rated Current: .8 A; Height: .5 mm; Width (mm): 0.5; Output Impedance (ohm): 220 OHM;
BKP1005EM221-T
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .15 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1 A;
BKP1005EM221-TV
FERRITE CHIP; Maximum DC Resistance: .15 ohm; Rated Current: 1 A; No. of Functions: 1; Screening Level: AEC-Q200; Packing Method: TR, EMBOSSED PAPER, 7 INCH;
BKP1005EM121-T
BKP1005EM121-T by Taiyo Yuden is a 0402 multilayer chip data line filter with FERRITE CHIP construction. Operating b/w -55°C to 85°C, it has a max frequency of 100 MHz and DC resistance of 0.085 ohm. Ideal for surface mount applications, rated current at 1.55 A makes it suitable for noise suppression in electronic circuits.
BKP1005EM121-TV
BKP1005EM121-TV by Taiyo Yuden is a FERRITE CHIP filter with 2 terminals, rated for 1.55A current and 120 ohm output impedance. It operates b/w -55°C to 125°C, ideal for data line filtering in automotive applications due to AEC-Q200 screening level compliance.
BKP1005HM221-TV
FERRITE CHIP; Maximum DC Resistance: .18 ohm; Rated Current: .9 A; No. of Functions: 1; Width (mm): 0.5; Dimensions: L1.0XB0.5XH0.5 (mm)/L0.039XB0.02XH0.02 (inch);
BKP1005HS100-T
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .03 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 2 A;
BKP1005HS100-T8
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 2 A; Length: 1 mm; Maximum Operating Temperature: 125 Cel; No. of Functions: 1;
BKP1608HS101
FERRITE CHIP; Construction: Multilayer Chip; Maximum DC Resistance: .05 ohm; Maximum Frequency: 100 MHz; Material: Ferrite; Rated Current: 1.7 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved