Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Technology: CMOS;
Median Price
$210.620
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
-
100+ parts
$205.590
1k+ parts
10k+ parts
Flip Electronics (Authorized)
Verical
$215.650
Vyrian
Digiode
Anansix
Flip Electronics
AZTECH Wire
$1.060
$1.020
$1.000
$0.980
Microchip USA
$216.149
Corphita
Authorized Procurement Solutions
UNI Independent Distributors
Microprocessors T1022NXE7WQB attributes and parameters. Explore more Microprocessors devices from NXP Semiconductors
Address Bus Width:
Bit Size:
Boundary Scan:
Maximum Clock Frequency:
External Data Bus Width:
Format:
Integrated Cache:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Maximum Seated Height:
Speed:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
Peripheral IC Type:
T1022NXE7WQB Peripheral ICs trade compliance attributes, and parameters.
ECCN
5A002.A.1
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Packaging - All Dev Label Update 15/Dec/2020 Mult Dev Pkg Seal 15/Dec/2020
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Defense Logistics Agency
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Mating Contacts: M39029/58-363; Removal Tool Sources: MILITARY; Alternate Contact Sources: MILITARY;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
LM317T/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-609 Code: e3; Package Shape: RECTANGULAR;
SS14
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Silicon Standard
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tak Cheong Electronics Holdings
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555D
STMicroelectronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
Bytesonic Electronics
MCF5208CVM166
The NXP MCF5208CVM166 microprocessor features a 32-bit architecture with integrated cache and operates at a max clock frequency of 40 MHz. Ideal for industrial applications, it has a low power mode and supports boundary scan testing. With a temperature range from -40 to 85°C, this CMOS technology-based chip is suitable for various embedded systems requiring high performance in compact form factors.
ATSAMA5D27C-LD2G-CUR22
Microchip Technology
ATSAMA5D27C-LD2G-CUR22 by Microchip Technology is a 32-bit microprocessor with 131072 RAM words, 24 MHz clock frequency, and 51 DMA channels. It is used in applications requiring high-speed processing, such as industrial automation and robotics due to its low power mode and floating-point format support.
MIMXRT1064DVL6AR
The NXP Semiconductors MIMXRT1064DVL6AR microprocessor features integrated cache, 1048576 RAM words, and low power mode. It is suitable for applications requiring high-speed processing in a compact form factor, such as IoT devices and embedded systems.
TA80960KB-16
Intel
Intel's TA80960KB-16 microprocessor features 32-bit address and external data bus width, with a max clock frequency of 32 MHz. Ideal for automotive applications, it operates b/w -40 to 125 °C, with a power supply range of 4.5-5.5 V and a max supply current of 315 mA.
MIMXRT106SCVL5B
MICROPROCESSOR, RISC; Maximum Time At Peak Reflow Temperature (s): 40; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 3;
MCF5251VM140
The NXP Semiconductors MCF5251VM140 microprocessor features a 32-bit architecture, 24-bit address bus width, and integrated cache. It is suitable for applications requiring a max clock frequency of 140 MHz, such as embedded systems and industrial automation. With a low profile grid array package style and ball terminal form, it offers reliable performance in commercial-grade environments.
MCF53721CVM240
NXP Semiconductors' MCF53721CVM240 microprocessor features 32-bit architecture, 80 MHz clock frequency, and integrated cache. Ideal for industrial applications requiring low power consumption and high-speed processing in a compact square package with 196 terminals.
Z0840006PSC
IXYS Corporation
Z0840006PSC by IXYS Corporation is an 8-bit microprocessor with a power supply of 5V and 40 terminals. It operates b/w temperatures of 0 to 70°C, making it suitable for commercial applications. This MOS technology-based processor has a speed of 6 rpm and a max supply current of 200mA, ideal for various embedded systems.
AM3351BZCE60R
AM3351BZCE60R by Texas Instruments is a 32-bit microprocessor with 131072 RAM words and 64 DMA channels. It operates at a max clock frequency of 26 MHz, suitable for low power mode applications. With a package style of grid array and boundary scan support, it's ideal for embedded systems requiring high-speed processing in compact form factors.
MCIMX6X2EVN10AB
Freescale Semiconductor
MICROPROCESSOR, RISC; JESD-609 Code: e1; Terminal Finish: TIN SILVER COPPER; Moisture Sensitivity Level (MSL): 3; Technology: CMOS;
P1010NXE5DFB
NXP Semiconductors P1010NXE5DFB microprocessor features 32-bit external data bus, 16-bit address bus, and integrated cache. Ideal for industrial applications with a temperature range of -40 to 105°C, it offers high performance in a compact square package with 425 terminals.
MIMXRT1011DAE5A
MICROPROCESSOR, RISC; Terminal Finish: TIN; Maximum Time At Peak Reflow Temperature (s): 40; Moisture Sensitivity Level (MSL): 3; JESD-609 Code: e3; Peak Reflow Temperature (C): 260;
P1020NXN2HFB
The NXP Semiconductors P1020NXN2HFB microprocessor features 32-bit architecture, 16-bit address bus width, and integrated cache. Ideal for RISC-based applications, it has a max supply voltage of 1.05 V and supports boundary scan technology.
ATSAMA5D26C-CU
Microchip's ATSAMA5D26C-CU is a 32-bit microprocessor with 131072 RAM words, 24 MHz clock frequency, and 1.25 V nominal voltage. Ideal for industrial applications, it features a RISC architecture, low power mode, and boundary scan capability.
CM8070104282327
MICROPROCESSOR;
MIMXRT1024DAG5A
NXP's MIMXRT1024DAG5A microprocessor features 32-bit architecture, 262144 RAM words, and a max clock frequency of 24 MHz. Ideal for low power applications with its integrated cache, it offers 3.6V max supply voltage and operates b/w 0-95°C.
P2010NXN2KFC
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 689; Package Code: BGA; Package Shape: SQUARE; Maximum Supply Voltage: 1.1 V;
HW8076502639302SR388
MPC8270VVUPEA
The NXP Semiconductors MPC8270VVUPEA microprocessor features a 32-bit address bus width, 64-bit external data bus width, and max clock frequency of 100 MHz. Ideal for commercial applications requiring high-speed processing capabilities in a compact package with boundary scan support.
MC7455ARX733LG
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 483; Package Code: BGA; Package Shape: SQUARE; Low Power Mode: YES;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
T1023NSE7PQA
The NXP Semiconductors T1023NSE7PQA microprocessor features a 64-bit architecture, 16-bit address bus width, and 32-bit external data bus width. Ideal for applications requiring high-speed processing, it operates b/w 0 to 105°C with low power mode support.
T1023NXE7MQA
MICROPROCESSOR; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 525; Package Code: FBGA; Package Shape: SQUARE;
T1023NXE7PQA
T1022NXN7WQB
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Minimum Supply Voltage: .97 V;
T1022NXE7MQB
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Width: 23 mm;
T1022NXE7PQB
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Moisture Sensitivity Level (MSL): 3;
T1022NSN7MQB
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Maximum Clock Frequency: 133.3 MHz;
T1022NXN7MQA
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Integrated Cache: YES;
T1022NSE7MQA
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Maximum Seated Height: 2.07 mm;
T1022NSE7PQB
T1022NSN7PQB
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Length: 23 mm;
T1022NXE7PQA
T1022NSN7MQA
T1022NXE7WQA
T1022NSE7PQA
T1022NSN7WQA
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Package Style (Meter): GRID ARRAY, FINE PITCH;
T1022NSE7WQA
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Package Body Material: PLASTIC/EPOXY;
T1022NSN7WQB
MICROPROCESSOR, RISC; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE; Address Bus Width: 16;
T1022NSN7PQA
T1022AN3MQB
Teledyne E2v (Uk)
MICROPROCESSOR, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 780; Package Code: FBGA; Package Shape: SQUARE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved