Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BTA225-600BT by NXP Semiconductors is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 150°C, ideal for snubberless applications in AC power control systems. The device features a max DC gate trigger current of 50mA and a max leakage current of 5mA.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
VNN
Anansix
Nova Conductors
Component Stockers USA
$0.690
$0.660
$0.630
One Stop Electronics
$2.100
Aztec Data Supply Inc.
$3.680
Corohmni
$4.686
AZTECH Wire
$6.067
Ampacity Inc.
$22.100
Kepictronics
UNI Independent Distributors
A-Z Elektronik GmbH
Corphita
Alle Elektronik GmbH
Lixinc
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Provides durability and protection for the internal components, ensuring a longer lifespan of the product.
Allows for precise control of the switching operation, ensuring efficient performance.
Simplified design with a single unit, making it easier to install and maintain.
Compact shape that takes up less space in the circuit board, ideal for applications with limited room.
Enables secure and stable connections with other components, reducing the risk of loose connections.
Low leakage current minimizes power loss and ensures efficient operation.
Simplified wiring setup with only three terminals, making it user-friendly for installation.
Easy mounting on a surface using flanges, providing stability and convenience.
Wide temperature range allows for operation in various environments without compromising performance.
Provides protection against voltage spikes and noise, improving the reliability of the product.
Ensures operation in cold conditions without loss of performance.
Corrosion-resistant finish on terminals for long-term reliability and stable connections.
Simplified terminal layout for easy connection and troubleshooting.
High current rating allows for handling of heavy loads, suitable for a wide range of applications.
Low gate trigger voltage for efficient control of the switching operation.
Clearly labeled case connection for easy installation and maintenance.
High voltage rating for reliable performance in high-voltage applications.
High rate of rise of off-state voltage for rapid switching capability and efficient operation.
Provides a margin of safety to ensure the device stays in the off-state when needed, preventing unintended activation.
Triode For Alternating Current (TRIAC) BTA225-600BT attributes and parameters. Explore more Triode For Alternating Current (TRIAC) devices from NXP Semiconductors
Case Connection:
Configuration:
Minimum Critical Rate of Rise of Off-state Voltage:
Maximum DC Gate Trigger Current:
Maximum DC Gate Trigger Voltage:
Maximum Holding Current:
JEDEC-95 Code:
JESD-30 Code:
JESD-609 Code:
Maximum Leakage Current:
No. of Elements:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Shape:
Package Style (Meter):
Qualification:
Maximum RMS On-state Current:
Repetitive Peak Off-state Voltage:
Sub-Category:
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Position:
Trigger Device Type:
BTA225-600BT Triggering Devices trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8541.30.00.80
SB
NXP is a leading semiconductor company that creates cutting-edge technology to power secure connections in a smarter world. Founded in 2006, they have grown to become one of the top five global semiconductor companies and serve their customers in over 70 countries around the world.
Executive Director, President, CEO
Kurt Sievers
Executive VP, CFO
Bill Betz
Executive VP, Chief Sales Officer
Ron Martino
ICN8
Fabrication
Fab Initiation
1996
Netherlands
Nijmegen
Wafer Capacity
55,000
ATMC (Austin Tech & Mfg Center)
1995
USA
Austin
30,000
N/A
1989
Germany
Boeblingen
CHD
1993
Chandler
OHTC
1991
24,000
New Expansion Fab
2026
ECHO
2020
10,000
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SPC TECHNOLOGY/ MULTICOMP
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99LT1G
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
Surge Components
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
DTA3E
DTA3E by Onsemi is a TRIAC with 1.8V max on-state voltage, 15mA max DC gate trigger current, and 1mA max leakage current. Ideal for AC applications, it has a max RMS on-state current of 3A and repetitive peak off-state voltage of 400V.
T435-600B-TR
STMicroelectronics' T435-600B-TR is a single TRIAC with 4A RMS on-state current and 600V repetitive peak off-state voltage. Ideal for snubberless applications, it has a max DC gate trigger current of 35mA and operates b/w -40 to 125°C.
T1235H-600TRG
T1235H-600TRG by STMicroelectronics is a snubberless TRIAC with a max RMS on-state current of 12A and a repetitive peak off-state voltage of 600V. It is commonly used in applications requiring AC power control, such as lighting dimmers and motor speed control.
CLA60MT1200NHR
Littelfuse
TRIAC;
Z00607MA1BA2
Z00607MA1BA2 by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage, 0.8A max RMS on-state current, and 7mA max DC gate trigger current. Ideal for applications requiring precise AC power control in various electronic devices.
BTB16-600SWRG
BTB16-600SWRG by STMicroelectronics is a single TRIAC with 16A max RMS on-state current, 600V repetitive peak off-state voltage, and 10mA max DC gate trigger current. It is ideal for applications requiring precise AC power control in industrial equipment, lighting systems, and home appliances.
ACS102-6TA-TR
STMicroelectronics ACS102-6TA-TR is a TRIAC with 5mA DC Gate Trigger Current, 7.6A Non Repetitive Peak On-state Current, and 0.2A Max On-state Current. It is used in applications requiring AC switching such as dimmers, motor speed controllers, and heating control systems.
MAC4DSMT4G
MAC4DSMT4G by Onsemi is a TRIAC with 600V repetitive peak off-state voltage and 4A max RMS on-state current. It operates b/w -40 to 125 °C, making it suitable for AC power control applications. With a surface mount package style and GULL WING terminal form, it offers efficient performance in various electronic devices.
MAC15-10
MAC15-10 by Onsemi is a TRIAC with 15A RMS on-state current, 800V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
TPDV1225RG
STMicroelectronics TPDV1225RG is a TRIAC with 150mA DC gate trigger current, 25A RMS on-state current, and 1200V repetitive peak off-state voltage. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
MAC16CMG
MAC16CMG by Onsemi is a TRIAC with 16A RMS on-state current, 35mA DC gate trigger current, and 600V repetitive peak off-state voltage. It is used in applications requiring AC power control such as dimmer switches, motor speed controls, and heating control systems.
BT139-600,127
NXP Semiconductors
The NXP Semiconductors BT139-600,127 is a TRIAC with 16A RMS on-state current and 600V repetitive peak off-state voltage. It has a max DC gate trigger current of 35mA and is ideal for applications requiring precise AC power control in various electronic devices.
2N6344A
2N6344A by Onsemi is a TRIAC with max. DC gate trigger current of 100mA, max. RMS on-state current of 12A, and repetitive peak off-state voltage of 600V. It is used in applications requiring AC power control like dimmers, motor speed controllers, and heating control systems.
BT139-800E,127
Ween Semiconductors
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: MAIN TERMINAL 2;
BT138-800G
Philips Semiconductors
TRIAC; Surface Mount: NO; Maximum Holding Current: 60 mA; Maximum DC Gate Trigger Current: 50 mA; Maximum RMS On-state Current: 12 A; Terminal Finish: Matte Tin (Sn);
MAC4DCN-1G
MAC4DCN-1G by Onsemi is a TRIAC with 500mA DC gate trigger current, 4A RMS on-state current, and 800V repetitive peak off-state voltage. It is used in applications requiring AC power control such as dimmers, motor speed controllers, and heating control systems.
SM2LZ47
The Toshiba SM2LZ47 is a TRIAC with 3 terminals, max. DC gate trigger current of 10mA, and max. RMS on-state current of 2A. Ideal for AC applications requiring precise switching control in temperatures ranging from -40 to 125°C.
MAC218A10
MAC218A10 by Onsemi is a TRIAC with 800V repetitive peak off-state voltage, 8A max RMS on-state current, and 2V max on-state voltage. It is used in AC power control applications due to its single configuration, through-hole terminal form, and flange mount package style.
BTA08-600BWRG
BTA08-600BWRG by STMicroelectronics is a single TRIAC with 8A max RMS on-state current, 600V repetitive peak off-state voltage, and 50mA max DC gate trigger current. It is used in snubberless TRIAC applications for AC control systems due to its UL recognized reference standard and -40 to 125°C operating temperature range.
BTA12-600CRG
BTA12-600CRG by STMicroelectronics is a single TRIAC with 12A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125 °C and has a max DC gate trigger current of 25mA. Ideal for applications requiring precise AC power control in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BTA26-600BRG
BTA26-600BRG by STMicroelectronics is a TRIAC with 600V repetitive peak off-state voltage and 25A max RMS on-state current. It has a 50mA max DC gate trigger current and operates b/w -40°C to 125°C. Ideal for applications requiring precise AC power control in various electronic devices.
BTA26-600BWRG
BTA26-600BWRG by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring up to 125°C operating temperature, such as in UL recognized systems for AC power control.
BTA26-800BWRG
BTA26-800BWRG by STMicroelectronics is a single TRIAC with 3 terminals, capable of handling up to 25A RMS current and 800V repetitive peak off-state voltage. It operates b/w -40°C to 125°C, making it suitable for various snubberless TRIAC applications. The device features a max DC gate trigger current of 50mA and a max leakage current of 3mA.
BTA25-600BW
BTA25-600BW by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It operates b/w -40 to 125°C, ideal for snubberless TRIAC applications. Featuring a max DC gate trigger current of 50mA, it is UL recognized and has an isolated case connection.
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
BTA25-600B
4 QUADRANT LOGIC LEVEL TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: UPPER; Configuration: SINGLE; Case Connection: ISOLATED;
STMicroelectronics BTA25-600B is a 25A TRIAC with 600V off-state voltage, suitable for AC applications. Features include 50mA gate trigger current, -40 to 125°C operating temp range, and UL recognition. Ideal for controlling power in various electronic devices.
BTA26-800BRG
BTA26-800BRG by STMicroelectronics is a TRIAC with 3 terminals, rated for 25A RMS current and 800V off-state voltage. It has a max operating temperature of 125°C and trigger voltage of 1.5V, making it suitable for AC power control applications requiring high reliability and performance in industrial settings.
BTA26-600BW
BTA26-600BW by STMicroelectronics is a single TRIAC with 25A RMS on-state current and 600V repetitive peak off-state voltage. It is used as a snubberless TRIAC in applications requiring up to 125°C operating temperature, such as AC power control circuits.
BTA26-800CWRG
SNUBBERLESS TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA204X-600C
TRIAC; Surface Mount: NO; Maximum Holding Current: 15 mA; Maximum RMS On-state Current: 4 A; Maximum On-state Voltage: 1.7 V; Repetitive Peak Off-state Voltage: 600 V;
BTA204X-600C,127
BTA26-800BW
BTA26-800BW by STMicroelectronics is a single TRIAC with 800V repetitive peak off-state voltage, 25A max RMS on-state current, and 50mA max DC gate trigger current. It is used in applications requiring snubberless TRIACs for AC power control at temperatures ranging from -40°C to 125°C.
BTA26600B
Loras Industries
TRIAC; Package Style (Meter): FLANGE MOUNT; Surface Mount: NO; Terminal Position: SINGLE; Configuration: SINGLE; Case Connection: ISOLATED;
BTA26-600B
BTA26-600B by STMicroelectronics is a TRIAC with a max RMS on-state current of 25A and a repetitive peak off-state voltage of 600V. It is commonly used in applications requiring 4 quadrant logic level TRIACs, such as motor control and lighting systems.
BTA24-800BWRG
STMicroelectronics' BTA24-800BWRG is a single TRIAC with 800V peak off-state voltage, 25A max RMS current, and 1.3V gate trigger voltage. Ideal for AC power control in appliances, lighting systems, and industrial equipment due to its snubberless design and UL recognition.
BTA206X-800CT,127
TRIAC; Surface Mount: NO; Maximum RMS On-state Current: 6 A; Moisture Sensitivity Level (MSL): 1; Maximum Holding Current: 35 mA; Repetitive Peak Off-state Voltage: 800 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved