Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
UVPROM; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: WDIP; Package Shape: RECTANGULAR; Input/Output Type: COMMON;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Bristol Electronics
Authorized Procurement Solutions
Supply Digital
Corphita
Microchip USA
EPROM NMC27C16BQE150 attributes and parameters. Explore more EPROM devices from National Semiconductor
Maximum Access Time:
Additional Features:
Input/Output Type:
JESD-30 Code:
JESD-609 Code:
Memory Density:
Memory IC Type:
Memory Width:
No. of Functions:
No. of Terminals:
No. of Words:
No. of Words Code:
Operating Mode:
Maximum Operating Temperature:
Minimum Operating Temperature:
Organization:
Output Characteristics:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Parallel or Serial:
Power Supplies (V):
Qualification:
Maximum Seated Height:
Maximum Standby Current:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
NMC27C16BQE150 Memory ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.32.00.61
SB
8542.32.00.60
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
Daco Semiconductor
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Shenzhen Yixinsemi Electronics
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
BAV99
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
TMS27C512-20JL
Texas Instruments
TMS27C512-20JL by Texas Instruments is a 64KX8 EPROM with 200ns access time, 3-STATE output, and CMOS technology. It operates at 5V, has a memory density of 524288 bit, and is used in commercial applications requiring fast parallel memory access.
TMS27C256-17JE
TMS27C256-17JE by Texas Instruments is a 32KX8 EPROM with 170 ns access time, 3-STATE output, and operates at -40 to 85 °C. It is used in industrial applications for storing data securely with a memory density of 262144 bit.
TMS27C010A-10JL
TMS27C010A-10JL by Texas Instruments is a 128KX8 EPROM with 100ns access time, operating at 5V. It features a CMOS technology, 3-STATE output, and IN-LINE package style. Commonly used in commercial applications requiring non-volatile memory storage with parallel interface.
TMS27C128-1JL4
TMS27C128-1JL4 by Texas Instruments is a 16KX8 EPROM with 150 ns access time, 3-STATE output, and 5V nominal voltage. Commonly used in commercial applications, it features a CMOS technology, through-hole terminal form, and operates in parallel mode for fast data retrieval.
EPC1441TC32N
Intel
EPC1441TC32N by Intel is a 32-terminal EPROM with a square package and a max operating temperature of 70°C. It operates in synchronous mode and has a memory density of 440800 bits. This configuration memory IC is suitable for various applications requiring non-volatile storage.
M27C1001-15L3X
M27C1001-15L3X EPROM by STMicroelectronics features 128KX8 organization, 120 ns access time, and 1048576 bit memory density. Ideal for automotive applications, it operates at temperatures ranging from -40 to 125 °C with a supply voltage of 4.5-5.5 V.
M27C1001-15F6
M27C1001-15F6 by STMicroelectronics is a 128KX8 EPROM with 3-STATE output, operating at 5V. It has a max access time of 150ns and memory density of 1048576 bits. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact IN-LINE package.
TMS27C32-150JL4
TMS27C32-150JL4 by Texas Instruments is a 4KX8 EPROM with 150 ns access time, 5V supply voltage, and 3-STATE output. It is used in commercial applications requiring fast memory access and features a CMOS technology for efficient performance.
TMS27C128-100JL4
TMS27C128-100JL4 by Texas Instruments is a 16KX8 EPROM with 100 ns access time, 5V supply voltage, and 3-STATE output. It is used in commercial applications requiring fast memory access and reliable data storage.
TMS27C040-80JL
TMS27C040-80JL by Texas Instruments is a 512KX8 EPROM with 80 ns access time, 5V supply voltage, and 32 terminals. It operates in asynchronous mode with a memory density of 4194304 bit. Commonly used for parallel applications requiring fast data access and reliable performance.
TMS27C510-12JE4
TMS27C510-12JE4 by Texas Instruments is a 64KX8 EPROM with 120ns access time, operating at 5V. It features a 3-STATE output and operates in industrial temperature range. Commonly used for memory storage applications due to its high density and parallel interface.
TMS27C256-45JL
TMS27C256-45JL by Texas Instruments is a 32KX8 EPROM with 450 ns access time, operating at 5V. It features 3-STATE output and CMOS technology, suitable for commercial applications requiring fast parallel memory access. The package style is IN-LINE, WINDOW with DUAL terminals and THROUGH-HOLE form factor.
M27C1001-15F6X
M27C1001-15F6X EPROM by STMicroelectronics features 128Kx8 organization, 120ns access time, and 5V nominal voltage. Ideal for industrial applications requiring reliable non-volatile memory with a max standby current of 0.0001Amp.
TMS27C512-3JL
TMS27C512-3JL by Texas Instruments is a 64KX8 EPROM with 300 ns access time, 5V supply voltage, and 524288 bit memory density. It is used in commercial applications requiring reliable non-volatile memory storage in a rectangular ceramic package with through-hole terminals.
5962-8961403MYX
5962-8961403MYX by STMicroelectronics is a military-grade EPROM with a 128Kx8 organization, operating asynchronously at a nominal voltage of 5V. It features a ceramic, metal-sealed package and supports temperatures from -55 °C to 125 °C. Ideal for reliable data storage in harsh environments.
TMS27C256-120JE4
TMS27C256-120JE4 by Texas Instruments is a 32KX8 EPROM with 120 ns access time, 3-STATE output, and operates at -40 to 85 °C. Commonly used in industrial applications for storing data securely due to its UVPROM memory type and CMOS technology.
8510202YA
National Semiconductor
UVPROM; No. of Terminals: 28; Technology: CMOS; Terminal Position: DUAL; Organization: 16KX8; No. of Words: 16384 words;
M27C1001-20F3
M27C1001-20F3 EPROM by STMicroelectronics features 128KX8 organization, 200 ns access time, and 1048576 bit memory density. Ideal for automotive applications, it operates at -40 to 125 °C with a supply voltage of 4.5-5.5 V.
M27C512-90F1
The STMicroelectronics M27C512-90F1 EPROM features 64KX8 organization, 90 ns access time, and 5V nominal voltage. Commonly used in commercial applications, this CMOS technology-based memory IC offers a memory density of 524288 bits and operates in parallel mode with a max standby current of 0.0001 Amp.
TMS27C040-120JE
TMS27C040-120JE by Texas Instruments is a 512Kx8 EPROM with 120ns access time, operating at 5V. It features asynchronous mode, 3-state output, and through-hole terminal form. Ideal for industrial applications requiring reliable non-volatile memory storage in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved