Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$2.878
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.280
100+ parts
$1.840
1k+ parts
$1.830
10k+ parts
$1.600
Texas Instruments
$2.943
$2.431
$1.314
-
Mouser Electronics
$4.020
$2.520
$2.440
$2.330
DigiKey
$4.270
$2.696
$2.456
$2.329
Arrow
$2.343
$2.181
$2.111
Verical
RS (Exports)
$2.812
Nova Conductors
$1.371
Digiode
$2.166
DF Sales Co.
$3.000
TME
$3.440
$2.610
Vyrian
Chip Stock
ACDS - Activité Composants Distribution Service
Anansix
Bristol Electronics
Electronics Depot
Continental Prestige Electronics
$1.099
$1.077
Argo Parts USA
Netroflash
Advanced Electronics
$1.398
Semicontronic
$1.500
$1.462
$1.455
Modulus Dynamics
$1.522
$1.507
$1.461
Corphita
$2.052
Corohmni
$6.140
Parana Technologies
$10.621
$11.114
DigiPath Technology Company
$11.695
$10.760
ChromeModa Solutions
$11.934
$9.786
IDEA Electronic Components Group
$11.337
$10.741
QUARKTWIN TECHNOLOGY LTD
Lixinc
Perfect Parts
Glotronic Ltd.
Authorized Procurement Solutions
CPlus Electronics
GreenTree Electronics
Robosynatics
Lucentia Tech
Line Drivers & Receivers DS89C21TM/NOPB attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Output Characteristics:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
DS89C21TM/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Copper Wire Update 14/May/2015 Mold Compound 24/Mar/2016
PCN Assembly/Origin - Mult Devices Assembly 22/Jan/2018
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Toshiba
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
LM7805CT
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Promax-johnton
FDD5614P
Onsemi
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WT
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
LMH0387SLE/NOPB
LMH0387SLE/NOPB by Texas Instruments is a Line Transceiver with 48 terminals, operating at -40 to 85°C. It features a differential output with complementary polarity and requires a supply voltage of 3.135-3.465V. Ideal for industrial applications requiring high-speed data transmission in compact spaces due to its small form factor and low power consumption.
ISL3172EIBZ-T
Renesas Electronics
ISL3172EIBZ-T by Renesas Electronics is a Line Driver & Receiver with 8 terminals, operating at -40 to 85°C. It features a differential output and supports EIA-422/EIA-485 interface standards. Ideal for industrial applications requiring BICMOS technology and a supply voltage range of 3V to 3.6V.
ADM3202ARNZ
Analog Devices
ADM3202ARNZ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3.3V. It features a max supply voltage of 5.5V and can withstand temperatures from -40 to 85°C. Ideal for industrial applications requiring EIA-232-E, TIA-232-E, V.28 interface standards.
MAX3232ECPE+
MAX3232ECPE+ by Analog Devices is a Line Driver & Receiver with 16 terminals. It operates at 3-5.5V, has 2 functions, and uses BICMOS technology. Ideal for EIA-232, TIA-232, V.24, V.28 interfaces in commercial applications requiring high output current of 1.6A.
DS26LV32ATMX
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SP485EEN-L/TR
Sipex
MAX3221ECAE+T
Analog Devices' MAX3221ECAE+T is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features a max output low current of 1.6A and supports interface standards EIA-232, TIA-232, V.24, V.28 for applications requiring reliable data transmission in commercial temperature environments up to 70°C.
DS26C31TM/NOPB
DS26C31TM/NOPB by Texas Instruments is a 4-function line driver with 3-STATE output, EIA-422 interface standard, and CMOS technology. It operates at -40 to 85 °C with a supply voltage range of 4.5V to 5.5V, making it ideal for industrial applications requiring differential outputs in compact spaces.
SN65HVD73DGS
SN65HVD73DGS by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and wide temperature range from -40 to 125°C.
SN65HVD72D
SN65HVD72D by Texas Instruments is a line transceiver with 8 terminals, operating at 3.3V supply voltage. It features EIA-422 and EIA-485 interface standards, differential output, and a max transmit delay of 1000ns. Ideal for automotive applications due to its wide temperature range from -40°C to 125°C.
MAX3490EESA+
MAX3490EESA+ by Analog Devices is a line driver with 3.6V max supply voltage, 35ns max transmit delay, and 2.5A max output low current. Ideal for EIA-422/EIA-485 interfaces in industrial applications due to its small outline package and differential output capability.
MAX3221EIPWRG4
MAX3221EIPWRG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It has a max supply voltage of 3.6V and can handle industrial temperatures from -40 to 85°C. Ideal for EIA-232-F, TIA-232-F, V.28 interfaces due to its Schmitt trigger input characteristics and inverted output polarity.
ISL3295EIHZ-T
Intersil
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: LSSOP; Package Shape: RECTANGULAR;
ISO1432BDWR
ISO1432BDWR by Texas Instruments is a line driver & receiver with a plastic/epoxy package. It has a max supply voltage of 5.5V and operates in automotive temperature grade. This interface IC type is commonly used for EIA-485-A, TIA-485-A, and EIA-422 applications.
DS34LV86TMX/NOPB
MAX3295AUT-T
MAX3295AUT-T by Analog Devices is a line driver & receiver with a max supply voltage of 3.465V and a max transmit delay of 25ns. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
SN65HVD1470DGSR
SN65HVD1470DGSR by Texas Instruments is a line driver/receiver with 10 terminals, operating at 3-3.6V. It features EIA-485 interface standard, differential output, and peak reflow temp of 260°C. Ideal for automotive applications due to its small outline package and Schmitt trigger input characteristics.
MAX485ESA+
Maxim Integrated
SN65HVD1474DGKR
SN65HVD1474DGKR by Texas Instruments is an EIA-485 line transceiver with a 3.6V supply voltage, 20ns transmit delay, and 90ns receive delay. Ideal for automotive applications, it operates in temperatures from -40 to 125°C and features a small outline package with dual Gull Wing terminals.
LTC2862ACS8-2#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS89C21TMX/NOPB
DS89C21TMX/NOPB by Texas Instruments is a Line Transceiver with 8 terminals, operating at 5V. It features differential outputs, Schmitt trigger input characteristics, and a max transmit delay of 10ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.
DS89C21TM/NOPB
DS8923AMX
DS8923AMX by Texas Instruments is a line driver and receiver with 2 functions. It has a max transmit delay of 15 ns and a max receive delay of 20 ns. This IC is commonly used in EIA-422, ESDI, ST412, and ST506 interfaces.
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
DS89C21TMX
DS8921AMX/NOPB
DS8922AMX/NOPB
DS8922AMX/NOPB by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has a max transmit delay of 15ns and is commonly used in EIA-422, ESDI, ST412, and ST506 interface applications.
DS8921ATM/NOPB
DS8921AM/NOPB
DS8921AM/NOPB by Texas Instruments is a line driver/receiver with 5.5V supply voltage, 15ns transmit delay, and 8A output low current. Ideal for EIA-422 interface applications requiring differential output and bipolar technology in commercial temperature grade environments.
DS8921MX/NOPB
DS89C21TM
DS89C21TN
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved