Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$1.324
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Rochester
1+ parts
$0.590
100+ parts
$0.580
1k+ parts
$0.570
10k+ parts
-
Chip1Stop
$1.300
$1.190
$0.985
$0.860
Arrow
$1.347
$1.234
$1.225
Texas Instruments
$2.571
$1.978
$1.041
DigiKey
$3.470
$2.153
$2.015
Verical
Nova Conductors
$0.833
Digiode
$1.388
TME
$3.110
$1.910
$1.720
Vyrian
Sensible Micro Corp
Anansix
Bristol Electronics
Chip Stock
Prism Electronics
Aranea Global
$0.816
$0.784
Continental Prestige Electronics
Argo Parts USA
Semicontronic
$1.060
$1.034
$1.028
Ampacity Inc.
Corphita
$1.315
Corohmni
$8.098
Parana Technologies
$9.907
$10.476
ChromeModa Solutions
$11.131
$9.127
IDEA Electronic Components Group
$10.574
$10.018
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
CPlus Electronics
A-Z Elektronik GmbH
Glotronic Ltd.
Alle Elektronik GmbH
Lixinc
Authorized Procurement Solutions
ChipTracer
DigiPath Technology Company
$10.036
Line Drivers & Receivers DS8921AMX/NOPB attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Output Characteristics:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
DS8921AMX/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
PIC18F4550-I/PT
PIC18F4550-I/PT by Microchip: 8-bit microcontroller with 44 terminals, 48 MHz clock frequency, and USB connectivity. Ideal for industrial applications requiring low power mode and 10-bit ADC channels.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
SMBJ18CA
Telefunken Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Formosa Microsemi
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
ISL3280EIHZ-T
Integrated Device Technology
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
MAX490ESA
Maxim Integrated
MAX490ESA by Maxim Integrated is a Line Driver & Receiver with 8 terminals, operating voltage of 4.75-5.25V, and output current up to 4A. Ideal for EIA-422/EIA-485 interfaces, it offers differential outputs and operates in industrial temperature range (-40 to 85°C).
MAX3232EIDWR
MAX3232EIDWR by Texas Instruments is a Line Driver & Receiver with 16 terminals. It operates at 3.3/5V, has a max supply voltage of 3.6V, and supports EIA-232-F interface standard. Ideal for industrial applications requiring inverted output polarity and Schmitt trigger input characteristics.
ISO3086DWG4
ISO3086DWG4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at -40 to 85°C. It features a max transmit delay of 45ns, differential outputs, and interface standards EIA-422/485. Ideal for industrial applications requiring high-speed data transmission in compact designs.
SN65C3232EDRE4
SN65C3232EDRE4 by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at 3.3/5V. It features EIA-232 interface standard, Schmitt trigger input characteristics, and dual function terminal position. Ideal for industrial applications requiring reliable data transmission over short distances with low power consumption.
LT1785AIS8#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SP335EER1-L
Maxlinear
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
ST232CDR
ST232CDR by STMicroelectronics is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max supply voltage of 5.5V and operates in temperatures ranging from 0 to 70°C. Ideal for EIA-232, TIA-232, V.28 interfaces in commercial applications.
SP3485CN-L
Sipex
THVD1450D
THVD1450D by Texas Instruments is an EIA-485-A/TIA-485-A line transceiver with differential output and Schmitt trigger input. It operates in automotive-grade temperature range (-40 to 125 °C) with a supply voltage of 3-5.5 V. With small outline package style, it offers fast transmission delay (20 ns) and low supply current (3 mA), making it ideal for industrial automation and communication systems.
ST3232CTR
ST3232CTR by STMicroelectronics is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features dual functions, CMOS technology, and Schmitt trigger input characteristics. Ideal for EIA-232, TIA-232, V.24, and V.28 interfaces in commercial temperature grade applications.
LTC2855IDE#PBF
Analog Devices
LTC2855IDE#PBF by Analog Devices is an EIA-485-A/TIA-485-A line transceiver with differential output. It operates at a supply voltage range of 3V to 3.6V and has a max transmit delay of 50ns. Ideal for industrial applications requiring reliable communication over long distances.
MAX3232CSE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3485CSA+T
MAX232CWE+T
MAX232CWE+T by Analog Devices is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 10000ns and operates b/w 0-70°C. Ideal for EIA-232-E, TIA-232-E, V.28, V.24 interfaces in commercial applications.
MAX3232CUE+T
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
ADM485ARZ-REEL
ADM485ARZ-REEL by Analog Devices is a Line Driver & Receiver with 5V supply, 15ns max transmit delay, and EIA-422/EIA-485 interface standard. Ideal for industrial applications requiring differential output and Schmitt trigger input characteristics in a compact small outline package.
SN65HVD78DRBR
SN65HVD78DRBR by Texas Instruments is a line driver/receiver with 3.6V max supply voltage, 15ns max transmit delay, and 8A max output low current. Ideal for automotive applications, it features EIA-422/EIA-485 interface standards and operates in temperatures ranging from -40 to 125°C.
SN65HVD75DGKR
SN65HVD75DGKR by Texas Instruments is a Line Driver & Receiver with 3.6V max supply voltage, 17ns max transmit delay, and 70ns max receive delay. Ideal for automotive applications due to its EIA-422/EIA-485 interface standard and differential output capability.
MAX232CSE+
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS89C21TMX/NOPB
DS89C21TMX/NOPB by Texas Instruments is a Line Transceiver with 8 terminals, operating at 5V. It features differential outputs, Schmitt trigger input characteristics, and a max transmit delay of 10ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.
DS89C21TM/NOPB
DS8923AMX
DS8923AMX by Texas Instruments is a line driver and receiver with 2 functions. It has a max transmit delay of 15 ns and a max receive delay of 20 ns. This IC is commonly used in EIA-422, ESDI, ST412, and ST506 interfaces.
DS89C21TMX
DS8921AMX/NOPB
DS8922AMX/NOPB
DS8922AMX/NOPB by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has a max transmit delay of 15ns and is commonly used in EIA-422, ESDI, ST412, and ST506 interface applications.
DS8921ATM/NOPB
DS8921AM/NOPB
DS8921AM/NOPB by Texas Instruments is a line driver/receiver with 5.5V supply voltage, 15ns transmit delay, and 8A output low current. Ideal for EIA-422 interface applications requiring differential output and bipolar technology in commercial temperature grade environments.
DS8921MX/NOPB
DS89C21TM
DS8921AM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved