Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$2.486
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.600
100+ parts
-
1k+ parts
10k+ parts
Farnell
$2.760
$1.660
$1.570
Texas Instruments
$2.798
$2.311
$1.249
Newark
$4.000
$3.390
$3.090
Mouser Electronics
$4.080
$2.460
$2.330
$2.210
Element14
$5.030
$4.790
Arrow
$1.756
Rochester
$1.980
$1.770
Verical
$2.212
$2.075
RS (Exports)
$2.182
$2.018
Nova Conductors
$1.020
Digiode
$1.444
Forefront Electronics and Design
$3.430
Vyrian
Anansix
Semtec, LLC
Semi Source
Chip Stock
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
Inventory MP
Bristol Electronics
Sensible Micro Corp
Argo Parts USA
Continental Prestige Electronics
$1.000
Semicontronic
$1.310
$1.277
$1.271
Corphita
$1.368
Corohmni
$2.755
Ampacity Inc.
$2.850
Parana Technologies
$6.129
$6.899
DigiPath Technology Company
$6.749
IDEA Electronic Components Group
$6.887
$6.198
ChromeModa Solutions
$5.647
Lixinc
Perfect Parts
Futuretech Components
Authorized Procurement Solutions
Technoshack Inc. (Excess)
Line Drivers & Receivers DS8921AM/NOPB attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Output Characteristics:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
DS8921AM/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Semitron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Silicon Standard
M39029/58360
Esterline Technologies
CONNECTOR ACCESSORY; Terminal Type: CRIMP; Removal Tools: M81969/14-01; Associated Military - Specifications: MIL-DTL-38999; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT;
FDLL4148
Onsemi
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
CRCW04020000Z0EDHP
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0EDHP is a 0402 SMT resistor with 0 ohm resistance, rated for temperatures from -55°C to 155°C. Ideal for jumper applications in automotive electronics due to AEC-Q200 compliance and compact size of 1mm x 0.5mm x 0.3mm.
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM555CM
Fairchild Semiconductor
LD1117S33CTR
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
2N7002
Motorola
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified; Minimum Operating Temperature: -55 Cel;
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
Taitron Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Minimum DS Breakdown Voltage: 60 V; Package Shape: RECTANGULAR;
SS14
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SP485EEN-L
Exar
Exar's SP485EEN-L is a BICMOS line transceiver with EIA-485/EIA-422 interface. It operates at 5V, has 8 terminals, and supports differential output. With a max transmit delay of 60ns, it is ideal for industrial applications requiring fast data transmission in temperature ranges from -40 to 85°C.
MAX232CWE
Rochester Electronics
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
MAX3160EAP+
Maxim Integrated
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SSOP; Package Shape: RECTANGULAR;
MAX3221EEAE+
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR;
DS34LV86TM/NOPB
DS34LV86TM/NOPB by Texas Instruments is a 16-terminal line driver with 3.3V power supply, operating b/w -40 to 85°C. It features EIA-422-B interface standard, differential output, and 4-bit receiver for industrial applications requiring high-speed data transmission.
ISOW1412DFM
ISOW1412DFM by Texas Instruments is a line driver & receiver with 20 terminals, operating from -40 to 105 °C. It supports EIA-422 and EIA-485 interfaces, with a supply voltage range of 1.71V to 5.5V. This IC is ideal for industrial applications requiring true output polarity and differential outputs.
LT1785CN8#PBF
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DRV135UA
Burr-Brown Corporation
LINE DRIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
ADM3101EACPZ-250R7
Analog Devices
ADM3101EACPZ-250R7 by Analog Devices is a CMOS Line Transceiver with 3.3V supply, 5.5V max voltage, and 1.6A output current. Ideal for EIA-232/TIA-232/V.28 interfaces in industrial settings due to its -40 to 85°C operating range and Schmitt trigger input characteristics.
XISOW1432DFMR
XISOW1432DFMR by Texas Instruments is a Line Transceiver with EIA-422 and EIA-485 interface standards. It operates in automotive-grade temperatures (-40 to 125 °C) with low power consumption (0.55 mA). Featuring differential outputs, it has a max transmit delay of 125 ns, making it ideal for industrial automation and communication applications.
DS91M040TSQX/NOPB
Line Driver or Receivers; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: QCCN; Package Shape: SQUARE;
SN65HVD72DRBT
SN65HVD72DRBT by Texas Instruments is a Line Transceiver with 8 terminals, operating at 3.3V power supply. It features EIA-422 and EIA-485 interface standards, with a max transmit delay of 1000ns. Ideal for automotive applications due to its wide temperature range from -40°C to 125°C.
DS90LV048ATMTCX/NOPB
LINE RECEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MAX485ESA-T
MAX485ESA-T by Maxim Integrated is a CMOS line transceiver with 8 terminals, operating at 5V. It features EIA-422 and EIA-485 interface standards, with a max supply voltage of 5.25V and output polarity as complementary. Ideal for industrial applications requiring differential outputs and Schmitt trigger inputs.
ISL3280EFHZ-T7A
Renesas Electronics
LINE RECEIVER; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed;
MAX232ACPE
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
SP3232EEY-L/TR
Maxlinear
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
DS26LV32ATMX
DS26LV32ATMX by Texas Instruments is a 4-function line receiver with 3.3V supply voltage, operating b/w -40 to 85°C. It features EIA-422-B, TIA-422-B, V.11 interface standards and differential Schmitt trigger input characteristics. Ideal for industrial applications requiring fast signal transmission with low output current of 6Amp at peak reflow temperature of 235°C in a small outline package style.
MAX232AEWE-T
MAX232AEWE-T by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interface standards in commercial temperature grade applications.
ISO1176TDWR
ISO1176TDWR by Texas Instruments is a line driver with 16 terminals, operating at -40 to 85 °C. It has a max transmit delay of 35 ns and differential output for EIA-485/TIA-485 interface standard. Ideal for industrial applications requiring high-speed data transmission in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS89C21TMX/NOPB
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS89C21TMX/NOPB by Texas Instruments is a Line Transceiver with 8 terminals, operating at 5V. It features differential outputs, Schmitt trigger input characteristics, and a max transmit delay of 10ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.
DS89C21TM/NOPB
DS8923AMX
DS8923AMX by Texas Instruments is a line driver and receiver with 2 functions. It has a max transmit delay of 15 ns and a max receive delay of 20 ns. This IC is commonly used in EIA-422, ESDI, ST412, and ST506 interfaces.
DS89C21TMX
DS8921AMX/NOPB
DS8922AMX/NOPB
DS8922AMX/NOPB by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has a max transmit delay of 15ns and is commonly used in EIA-422, ESDI, ST412, and ST506 interface applications.
DS8921ATM/NOPB
DS8921AM/NOPB
DS8921AM/NOPB by Texas Instruments is a line driver/receiver with 5.5V supply voltage, 15ns transmit delay, and 8A output low current. Ideal for EIA-422 interface applications requiring differential output and bipolar technology in commercial temperature grade environments.
DS8921MX/NOPB
DS89C21TM
DS8921AM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved