Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Median Price
$3.640
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$2.798
100+ parts
$2.311
1k+ parts
$1.249
10k+ parts
-
DigiKey
$2.277
$2.069
$1.924
Mouser Electronics
$2.180
$2.060
$1.950
Chip1Stop
$4.430
$1.820
$1.770
Arrow
$1.910
$1.726
$1.484
Nova Conductors
$1.021
Digiode
$2.658
TME
$4.190
$2.680
$2.520
$2.480
Vyrian
Connect4Technologies Inc.
Rebound Electronics
Speed Components Ltd
Anansix
Chip Stock
Prism Electronics
QIE Inc.
Cyclops Electronics Ltd
Semi Source
Argo Parts USA
Netroflash
Continental Prestige Electronics
$1.220
Ampacity Inc.
$1.620
Corphita
$2.518
Corohmni
$8.538
Parana Technologies
$9.989
$10.551
DigiPath Technology Company
$11.000
$10.120
IDEA Electronic Components Group
$11.224
$10.663
$10.102
ChromeModa Solutions
$9.204
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Lixinc
CPlus Electronics
Legend Electronics Inc. (Excess)
Speed Components Ltd (Excess)
Line Drivers & Receivers DS8921ATM/NOPB attributes and parameters. Explore more Line Drivers & Receivers devices from National Semiconductor
Differential Output:
Driver No. of Bits:
Maximum High Level Input Current:
Input Characteristics:
Interface IC Type:
Interface Standard:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Minimum Out Swing:
Output Characteristics:
Maximum Output Low Current:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Receive Delay:
Receiver No. of Bits:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Transmit Delay:
Width:
DS8921ATM/NOPB Interface ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
1N4148
1N4148 by Texas Instruments is a rectifier diode with max reverse recovery time of 0.004 us and max forward voltage of 1V. Ideal for applications requiring low reverse current such as signal demodulation circuits. Operates at max temp of 200°C, making it suitable for high-temperature environments.
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NC7WZ07P6X
Onsemi
The Onsemi NC7WZ07P6X is a logic gate with 2 functions, featuring a propagation delay of 4.8 ns at 1.8V supply voltage. With open-drain output characteristics, it operates in industrial temperatures from -40 to 85°C. Ideal for applications requiring fast signal processing and low power consumption in compact designs.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
Comchip Technology
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
Yangzhou Yangjie Electronics
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
Tri-star Electronics International
CONNECTOR ACCESSORY; Material: COPPER ALLOY; MIL Conformity: YES; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; MIL-Connector Accessory Name: CONTACT; Terminal Type: CRIMP;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
Rfe International
LM358AN
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
ICL3221EIAZ-T7A
Renesas Electronics
LINE TRANSCEIVER; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
MAX232AEWE
Maxim Integrated
MAX232AEWE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and output polarity is inverted. Widely used in EIA-232-E, TIA-232-E interfaces for communication applications.
LTC2862ACS8-2#PBF
Analog Devices
LTC2862ACS8-2#PBF by Analog Devices is a Line Driver & Receiver with 8 terminals, operating at 3-5.5V. It offers differential output and interfaces with EIA-422/EIA-485 standards. Ideal for applications requiring fast data transmission over short distances in commercial temperature range.
SP335EER1-L/TR
Exar
Exar's SP335EER1-L/TR is a Line Transceiver with 2 functions, operating at 3-5.5V. It features EIA-232 interface standard, differential output, and quad terminal position. Ideal for industrial applications requiring reliable data transmission within the -40 to 85°C temperature range.
MAX3232ECWE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN75176ADRG4
SN75176ADRG4 by Texas Instruments is a Line Driver & Receiver with 8 terminals, operating at 5V. It features a max transmit delay of 60ns and differential output. Ideal for V.11 and EIA-422-B interface standards in commercial temperature grade applications.
ISL83485IBZ-T7A
Line Driver or Receivers; Terminal Finish: MATTE TIN; Peak Reflow Temperature (C): 250; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30; JESD-609 Code: e3;
MAX3232IDW
MAX3232IDW by Texas Instruments is a Line Driver & Receiver with 16 terminals, operating at temperatures from -40 to 85°C. It has a max supply voltage of 3.6V and peak reflow temperature of 260°C. Ideal for industrial applications requiring EIA-232-F, TIA-232-F, V.28 interface standard compliance.
ADM3101EACPZ-REEL
ADM3101EACPZ-REEL by Analog Devices is a CMOS Line Driver & Receiver with 3.3V power supply, 5.5V max voltage, and EIA-232 interface standard. Ideal for industrial applications requiring high-speed data transmission over long distances with its SCHMITT TRIGGER input characteristics and quad terminal position.
SN65HVD10DR
SN65HVD10DR by Texas Instruments is a line driver and receiver with a max supply voltage of 3.6V. It has a max transmit delay of 16ns and operates in an industrial temperature range. This IC is commonly used as a line transceiver for EIA-485-A, TIA-485-A, and ISO 8482 interfaces.
MAX3232EEAE+T
Analog Devices' MAX3232EEAE+T is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features BICMOS technology, EIA-232 interface standard, and SCHMITT TRIGGER input characteristics. Ideal for industrial applications requiring reliable data transmission in harsh environments.
LTC485IN8#PBF
Linear Technology
LINE TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS26C32ATM
DS26C32ATM by Texas Instruments is a line driver with 4 functions, operating at 5V. It has a max output low current of 6A and receiver with 4 bits. Ideal for EIA-422 and EIA-423 interfaces in industrial applications due to its CMOS technology and wide temperature range from -40°C to 85°C.
SN65LVDT2DBVT
SN65LVDT2DBVT by Texas Instruments is a Line Receiver IC with 3.6V max supply voltage, 3.1ns max transmit delay, and 8mA max supply current. Ideal for industrial applications requiring EIA-644-A interface standard and TTL technology in a small outline package.
MAX3483EESA+
MAX3232ECPE+
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MAX232ACWE
MAX232ACWE by Maxim Integrated is a Line Driver & Receiver with 2 functions, operating at 5V. It has a max transmit delay of 3500ns and can handle up to 10mA supply current. Ideal for EIA-232-E, TIA-232-E, V.28, and V.24 interfaces in commercial temperature grade applications.
MAX3232ECAE+
MAX3232ECAE+ by Analog Devices is a Line Driver & Receiver with 16 terminals, operating at 3-5.5V. It features dual functions, BICMOS technology, and supports EIA-232/TIA-232/V.24/V.28 interfaces. Ideal for applications requiring reliable signal transmission in commercial temperature range of 0-70°C.
SN65C1168EPWR
SN65C1168EPWR by Texas Instruments is a Line Driver & Receiver with 2 functions, operating at 5V. It features EIA-422-B, TIA-422-B, V.11 interface standard and differential output for industrial applications. With a max supply voltage of 5.5V and transmit delay of 16ns, it offers reliable performance in various communication systems.
AM26LV31EIRGYR
AM26LV31EIRGYR by Texas Instruments is a 4-function line driver with 3.6V max supply voltage, operating at -40 to 85°C. It features EIA-422-B interface standard and is ideal for industrial applications requiring true output polarity and differential outputs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DS89C21TMX/NOPB
National Semiconductor
DS89C21TMX/NOPB by Texas Instruments is a Line Transceiver with 8 terminals, operating at 5V. It features differential outputs, Schmitt trigger input characteristics, and a max transmit delay of 10ns. Ideal for industrial applications requiring reliable data transmission in harsh environments.
DS89C21TM/NOPB
DS8923AMX
DS8923AMX by Texas Instruments is a line driver and receiver with 2 functions. It has a max transmit delay of 15 ns and a max receive delay of 20 ns. This IC is commonly used in EIA-422, ESDI, ST412, and ST506 interfaces.
DS89C21TMX
DS8921AMX/NOPB
LINE TRANSCEIVER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
DS8922AMX/NOPB
DS8922AMX/NOPB by Texas Instruments is a line driver and receiver with a max supply voltage of 5.5V. It has a max transmit delay of 15ns and is commonly used in EIA-422, ESDI, ST412, and ST506 interface applications.
DS8921ATM/NOPB
DS8921AM/NOPB
DS8921AM/NOPB by Texas Instruments is a line driver/receiver with 5.5V supply voltage, 15ns transmit delay, and 8A output low current. Ideal for EIA-422 interface applications requiring differential output and bipolar technology in commercial temperature grade environments.
DS8921MX/NOPB
DS89C21TM
DS8921ATM
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved