Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-1251 RF MMCX Connector features 0.173" body diameter, 1000000000 ohm insulation resistance, and 0.2 dB insertion loss. Ideal for applications requiring a durable connector with characteristic impedance of 50 ohm, such as RG-316 cable types in high-frequency environments up to 6 GHz.
Median Price
$4.245
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.990
100+ parts
$2.793
1k+ parts
$2.314
10k+ parts
-
Mouser Electronics
$4.500
$3.250
$2.760
$2.580
Element14
$4.800
$4.190
TTI
$3.300
$2.570
$2.150
PSC Electronics
Nova Conductors
$2.280
Digiode
$3.790
VNN
Vyrian
Q Components
Aranea Global
$2.234
$2.145
Argo Parts USA
Continental Prestige Electronics
Advanced Electronics
$2.645
$2.433
Semicontronic
$2.800
$2.730
$2.716
Corphita
$3.591
Aztec Data Supply Inc.
$8.606
Andel Nordic
$8.860
$6.200
Kepictronics
Perfect Parts
Robosynatics
$0.114
Lucentia Tech
The compact size of the body makes this connector suitable for applications where space is limited.
High insulation resistance ensures minimal signal loss and interference, resulting in reliable performance.
Low insertion loss helps maintain signal strength and quality in transmission.
High dielectric voltage withstand capability ensures safe operation and protection against electrical breakdown.
Gold/nickel contact finish provides excellent conductivity and corrosion resistance for long-term durability.
Snap coupling allows for quick and easy connection, suitable for applications requiring frequent mating and unmating.
Polytetrafluoroethylene insulation offers high temperature resistance and excellent dielectric properties for reliable performance.
Withstands high temperatures, making it suitable for applications exposed to elevated operating conditions.
Capable of operating in low temperatures, suitable for a wide range of environments.
Gold shell finish provides enhanced durability and corrosion resistance, ensuring long-term performance.
RF MMCX connector ensures reliable RF signal transmission and compatibility with MMCX interfaces.
Brass contacts offer high conductivity and durability for reliable electrical connections.
Low VSWR indicates efficient power transfer and minimal signal reflection for optimal RF performance.
Withstands repeated mating cycles, suitable for applications requiring frequent connection and disconnection.
Cable mounting type allows for easy installation and secure connection to cable assemblies.
Matches standard impedance requirements for RF applications, ensuring proper signal transmission and compatibility.
Brass shell material provides durability and robustness for reliable performance in demanding environments.
Compatible with RG-316 cable types, ensuring secure and reliable connections for various applications.
Crimp termination offers a secure and reliable connection method for cable assemblies, preventing signal loss and interference.
Low withdrawal force ensures easy disconnection and prevents damage to the connector during removal.
Male contact gender is commonly used for RF connections, providing a secure and reliable interface.
Low contact resistance ensures minimal signal loss and efficient power transfer for reliable performance.
Plug style design enables easy mating and unmating of connectors, suitable for applications requiring quick connections.
Straight mounting style allows for easy installation in a linear configuration, suitable for various equipment setups.
Coaxial contact style ensures proper RF signal transmission with minimal interference and signal loss.
High insertion force ensures a secure and reliable connection, preventing accidental disconnection during operation.
Locking mounting option provides added security and stability for the connector during operation, preventing unintended disconnection.
Capable of handling high-frequency signals up to 6 GHz, suitable for a wide range of RF applications.
MCX & MMCX Connectors 73415-1251 attributes and parameters. Explore more MCX & MMCX Connectors devices from Molex
Additional Features:
Body Diameter:
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insertion Loss:
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Finish:
Shell Material:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
73415-1251 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
1N4148
Shenzhen Yixinsemi Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
Onsemi
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
1N5819HW-7-F
Diodes Incorporated
1N5819HW-7-F by Diodes Inc. is a Schottky rectifier diode with 40V reverse test voltage, 1A output current, and 0.75V forward voltage. It's a surface mount device in a small outline package ideal for efficiency applications at temperatures ranging from -65 to 125°C.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
MICRODIODE ELECTRONICS SHENZHEN CO LTD
4554
Jw Miller Magnetics
Other Semiconductors;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM358N
Fairchild Semiconductor
EU2B-YS3203C
Idec
ROTARY SWITCH;
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
STM8S003F3P6TR
STMicroelectronics
STM8S003F3P6TR by STMicroelectronics is an 8-bit microcontroller with a max clock frequency of 16 MHz. It features 1024 RAM bytes, 128 data EEPROM size, and 5-ch 10-bit ADC channels. Ideal for industrial applications requiring low power mode and connectivity via I2C, SPI, and UART interfaces.
252151
Amphenol
Amphenol 252151 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting in applications requiring high-frequency signal transmission with low loss and high-quality gold termination contacts.
MMCX-P-P-H-ST-EM1
Samtec
Samtec's MMCX-P-P-H-ST-EM1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for commercial applications, it features gold termination finish, PTFE insulator material, and brass shell construction for reliable performance in temperatures ranging from -65 to 125°C.
133-8433-101
Bel Fuse
Bel Fuse 133-8433-101 is an RF MCX connector with 1.07 VSWR, 0.2 dB insertion loss, and 1400VAC dielectric voltage. Ideal for RG-179 cables in applications requiring a durable, right-angle plug with 75 ohm impedance and PTFE insulator material.
908-22101
Amphenol 908-22101 RF MMCX Connector features 50 ohm impedance, 700VAC dielectric voltage, and 6 GHz operating frequency. Ideal for commercial applications requiring high durability with a min temperature of -55°C and max of 155°C. Suitable for board mounting with liquid crystal polymer insulator material.
MMCX-P-P-H-ST-TH1
Samtec's MMCX-P-P-H-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, -65 to 125 °C temperature range, and 700VAC dielectric voltage.
133-9701-201
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; IEC Conformity: NO; Mounting Style: STRAIGHT;
262107
Amphenol 262107 is an RF MMCX connector with gold termination, ideal for board mounting. Featuring a female contact gender and PTFE insulator material, it offers reliable connectivity in various applications like telecommunications and networking equipment.
908-22101-TC
Amphenol's 908-22101-TC RF MMCX Connector features GOLD finish, LIQUID CRYSTAL POLYMER insulator, and BERYLLIUM COPPER contact material. With a 50 ohm impedance and 6 GHz operating frequency, it is ideal for high-frequency applications requiring surface mount termination in MCX & MMCX Connectors.
82_MMCX-50-0-18/111_OM
Huber+suhner Ag
82_MMCX-50-0-18/111_OM by Huber+suhner Ag is a RF MMCX connector with gold (Au) termination, SNAP coupling, and 50 ohm impedance. Ideal for applications requiring surface mount female connectors up to 6 GHz frequency, such as in telecommunications and wireless networking systems.
R113.424.000
Radiall S A
R113.424.000 by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR suitable for applications up to 6 GHz frequency range. It features gold over nickel termination finish, PTFE insulator material, and can withstand temperatures from -55 to 155 °C. Ideal for commercial use in board mounting configurations requiring high durability with 500 cycles lifespan.
MMCX-J-P-H-ST-MT1
Samtec's MMCX-J-P-H-ST-MT1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 125°C operating temp. Ideal for commercial applications, it features brass shell material, PTFE insulator, and snap coupling for reliable performance in board mounting setups.
82_MMCX-50-0-8/111_OE
82_MMCX-50-0-8/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features gold (Au) termination contact finish, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator material, and operates up to 6 GHz. Ideal for commercial applications requiring durable connectors with surface mount termination.
MMCX-J-P-H-ST-SM1-TR
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
MMCX-J-P-H-RA-TH1
Samtec's MMCX-J-P-H-RA-TH1 RF MMCX Connector features a 0.138" body diameter, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications requiring a right-angle jack with female contact gender and gold finish for reliable signal transmission.
MCX-J-P-H-RA-TH1
The Samtec MCX-J-P-H-RA-TH1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting applications requiring a right-angle jack with female coax contact style. With gold over nickel termination finish, this connector ensures reliable signal transmission in temperatures ranging from -65 to 125°C.
73415-3210
Molex
Molex 73415-3210 is an RF MMCX connector with 50 ohm impedance, RG-178 cable type, and crimp termination. Ideal for commercial applications requiring a straight jack body style with coax contact and locking mounting option.
135-3801-201
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Insulator Material: POLYTETRAFLUOROETHYLENE; Maximum Operating Frequency: 6 GHz;
908-43300
Amphenol 908-43300 is an RF MMCX connector with 50 ohm impedance, gold finish, and 700VAC dielectric voltage. Ideal for RG-316 cables, it operates b/w -55 to 155°C, withstands 500 cycles, and has a max frequency of 6 GHz. Suitable for commercial applications requiring high durability and low contact resistance.
MMCX-J-P-H-ST-SM1-K
RF MMCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
262105
Amphenol 262105 is an RF MMCX connector with SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for board mounting with SOLDER termination in JACK body style. Commonly used in MCX & MMCX applications requiring RIGHT ANGLE mounting.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73415-1471
Molex 73415-1471 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high durability and operating frequency up to 6 GHz.
73415-2063
Molex 73415-2063 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 1.2 VSWR. Ideal for commercial applications with a frequency range up to 6 GHz, offering durability of 500 cycles in board and panel mounting configurations.
73415-0961
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Type: BOARD; Termination Type: SURFACE MOUNT;
73415-1001
The Molex 73415-1001 RF MMCX Connector features a characteristic impedance of 50 ohm, insertion loss of 0.2 dB, and dielectric voltage withstand of 700VAC. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 6 GHz.
73415-0951
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Panel Mount: NO;
73415-1692
Molex 73415-1692 RF MCX Connector has a characteristic impedance of 50Ω, insulator material PTFE, and coupling type SNAP. Ideal for board mounting in applications requiring female contact gender, surface mount termination, and straight mounting style.
73415-2061
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Insertion Force (N): 15.1232; Coupling Type: SNAP;
73415-0963
Molex 73415-0963 RF MMCX Connector features SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for BOARD mounting in RF applications requiring STRAIGHT JACK style connectors.
73415-1121
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Type: CABLE; Panel Mount: NO;
73415-0971
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Option-1: LOCKING;
73415-1691
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
73415-0991
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
73415-1002
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: RIGHT ANGLE; Mating Contact Finish: NOT SPECIFIED;
73413-0050
Molex 73413-0050 is a RF MCX connector with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring FEMALE contact gender in JACK body style.
73415-3410
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Contact Material: BERYLLIUM COPPER; Body or Shell Style: JACK; Mounting Type: CABLE;
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73415-4490
RF MCX CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Cable Types: RG-179;
73415-1690
The Molex 73415-1690 is a RF MCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is designed for surface mount termination on boards, making it suitable for various applications in the MCX & MMCX connectors category.
73415-1252
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
73415-1000
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved