Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-1692 RF MCX Connector has a characteristic impedance of 50Ω, insulator material PTFE, and coupling type SNAP. Ideal for board mounting in applications requiring female contact gender, surface mount termination, and straight mounting style.
Median Price
$1.872
Lifecycle Status
Suppliers In-Stock
29
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$3.120
100+ parts
$2.260
1k+ parts
$1.990
10k+ parts
$1.870
DigiKey
$3.260
$2.279
-
Newark
$3.840
$2.970
$2.510
Adafruit Industries
$94.990
$86.441
$77.892
Avnet
$1.702
PEI Genesis
Chip1Stop
$1.600
$1.510
Element14
$1.550
Farnell
$0.992
$0.864
TTI
$1.650
TTI Europe
$1.784
$1.526
Master Electronics
$1.930
$1.750
Verical
$1.848
Powell Electronics
$1.970
Interstate Connecting
$1.896
Nova Conductors
$1.776
Digiode
$1.843
Rapid Electronics
$1,959.826
Vyrian
Sensible Micro Corp
NAC Semi
$2.240
$2.070
Component Sense
IBS Electronics
$2.202
$2.160
Contempo Components LLC
VNN
Martec Srl
Chip Stock
ComSIT Distribution GmbH
Bristol Electronics
Semicontronic
$1.360
$1.326
$1.319
Corphita
$1.746
Argo Parts USA
Continental Prestige Electronics
$1.740
Advanced Electronics
$1.803
Andel Nordic
$6.970
$6.691
CoreStaff
$8.165
$1.807
Aztec Data Supply Inc.
$9.125
Perfect Parts
GreenTree Electronics
Kepictronics
Cyclops Electronics Ltd (Excess)
Assy Fe
Netroflash
$1.687
$1.652
Ensures easy and quick connection and disconnection, making it convenient for users.
Provides high insulation properties, ensuring stable and reliable performance.
Specifically designed for RF applications, ensuring excellent signal transmission.
Allows for easy and secure mounting on circuit boards, making installation hassle-free.
Matches common impedance requirements, ensuring compatibility with various systems.
Enables simple and effective termination on surface mount PCBs, saving time and effort.
Ensures compatibility with male connectors, allowing for versatile connectivity options.
Offers a secure and stable connection, reducing the risk of signal loss or interference.
Provides a straightforward and clean mounting solution, ideal for space-constrained applications.
MCX & MMCX Connectors 73415-1692 attributes and parameters. Explore more MCX & MMCX Connectors devices from Molex
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
73415-1692 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
PCN Assembly/Origin - Multiple Devices Move 10/Jan/2018
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
2N7002
Transys Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 60 V; Maximum Operating Temperature: 150 Cel;
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NXP Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; JESD-609 Code: e3; Minimum DS Breakdown Voltage: 60 V;
Continental Device India
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
Eic Semiconductor
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
MMBT3904LT1G
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
73415-1001
Molex
The Molex 73415-1001 RF MMCX Connector features a characteristic impedance of 50 ohm, insertion loss of 0.2 dB, and dielectric voltage withstand of 700VAC. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 6 GHz.
MCX7-J-P-H-RA-TH1
Samtec
Samtec's MCX7-J-P-H-RA-TH1 RF MCX Connector features gold termination, 75 ohm impedance, and 6 GHz frequency. Ideal for board mounting in applications requiring a snap coupling type, such as high-frequency signal transmission.
135-3403-101
Johnson Components
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD OVER NICKEL; Filter Feature: NO; MIL Conformity: NO;
16_MMCX-50-2-13/111_OE
Huber+suhner Ag
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: GOLD OVER NICKEL; Contact Material: BRASS;
MCX1252B1-3GT30G-50
Amphenol
Amphenol's MCX1252B1-3GT30G-50 is an RF MCX connector with gold over nickel finish. It features snap coupling, PTFE insulator, and right-angle mounting for board soldering. Ideal for applications requiring male plug connectors in MCX & MMCX categories.
MMCXV-J-P-HF-ST-TH1
Samtec's MMCXV-J-P-HF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, 1.3 VSWR, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, PTFE insulator, and brass shell material for reliable performance in temperatures ranging from -65 to 125°C.
133-3711-312
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; DIN Conformance: NO; Termination Type: SURFACE MOUNT;
73415-1692
Bel Fuse
Bel Fuse 133-3711-312 is an RF MCX connector with 50 ohm impedance, PTFE insulator, and brass shell. Operating at -65 to 165°C, it withstands up to 1400VAC and offers durability of 500 cycles. Ideal for board mounting in applications requiring a reliable female jack connector up to 6 GHz.
R113.426.000W
Radiall S A
R113.426.000W by Radiall S A is a RF MCX CONNECTOR with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR. Ideal for board and panel mounting in applications requiring high durability up to 6 GHz frequency range.
66012102111404
Wuerth Elektronik & Kg
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
60626021110620
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
MMCX-P-P-H-ST-MT1
Samtec's MMCX-P-P-H-ST-MT1 is a RF MMCX connector with 50 ohm impedance, gold termination finish, and 6 GHz operating frequency. Ideal for commercial applications, it offers high insulation resistance of 1 Gohm and can withstand up to 700VAC dielectric voltage. With a temperature range from -65°C to 125°C, this connector is suitable for various board mounting setups.
73415-1471
Molex 73415-1471 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high durability and operating frequency up to 6 GHz.
MMCX-J-P-H-ST-TH1
Samtec's MMCX-J-P-H-ST-TH1 RF MCX connector has a body diameter of 0.138", insulation resistance of 1G ohm, and dielectric voltage of 700VAC. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade systems operating up to 6GHz with a temperature range from -65°C to 125°C.
MMCX7-J-P-GF-ST-TH1
The Samtec MMCX7-J-P-GF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold over nickel finish, and 6 GHz operating frequency. It is used in commercial applications for board mounting due to its straight jack style and locking option for reliable connections.
R113.182.000W
R113.182.000W by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.1 VSWR. It is used in applications requiring high durability, such as commercial-grade systems operating up to 6 GHz frequency range with RG-188 cables for reliable signal transmission.
MCX7-P-C-H-ST-CA3
Samtec's MCX7-P-C-H-ST-CA3 is a RF MCX connector with 75 ohm impedance, gold finish, and snap coupling. Ideal for applications requiring a max frequency of 6 GHz, this male plug connector is designed for cable mounting using crimp solder termination.
R113665000
The Radiall S A R113665000 is a RF MCX connector with 50 ohm impedance, gold termination finish, and snap coupling. Ideal for board and panel mounting applications up to 6 GHz frequency. Features female contact gender and right angle mounting style for versatile connectivity solutions.
5-829558-2
TE Connectivity
TE Connectivity 5-829558-2 is an RF MCX connector with a characteristic impedance of 50 ohm. It features a snap coupling type, gold shell finish, and PTFE insulator material. Ideal for commercial applications with a max operating frequency of 6 GHz, it offers reliable performance in temperatures ranging from -65 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73415-2063
Molex 73415-2063 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 1.2 VSWR. Ideal for commercial applications with a frequency range up to 6 GHz, offering durability of 500 cycles in board and panel mounting configurations.
73415-0961
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Type: BOARD; Termination Type: SURFACE MOUNT;
73415-0951
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Panel Mount: NO;
73415-2061
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Insertion Force (N): 15.1232; Coupling Type: SNAP;
73415-0963
Molex 73415-0963 RF MMCX Connector features SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for BOARD mounting in RF applications requiring STRAIGHT JACK style connectors.
73415-1121
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Type: CABLE; Panel Mount: NO;
73415-0971
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Option-1: LOCKING;
73415-1251
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Body Diameter: .173 inch;
73415-1691
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
73415-0991
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
73415-1002
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: RIGHT ANGLE; Mating Contact Finish: NOT SPECIFIED;
73413-0050
Molex 73413-0050 is a RF MCX connector with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring FEMALE contact gender in JACK body style.
73415-3410
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Contact Material: BERYLLIUM COPPER; Body or Shell Style: JACK; Mounting Type: CABLE;
73415-3210
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73415-4490
RF MCX CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Cable Types: RG-179;
73415-1690
The Molex 73415-1690 is a RF MCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is designed for surface mount termination on boards, making it suitable for various applications in the MCX & MMCX connectors category.
73415-1252
73415-1696
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; DIN Conformance: NO;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved