Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-0971 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for commercial applications with RG-178 cable type, operating up to 6 GHz frequency range.
Median Price
$3.385
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$4.470
100+ parts
$3.128
1k+ parts
$2.592
10k+ parts
-
Newark
$5.750
$4.300
$3.750
Mouser Electronics
$6.020
$4.820
$3.490
Chip1Stop
$1.990
$1.860
$1.610
Verical
$2.985
$2.629
$2.267
Master Electronics
$3.580
$3.030
$2.830
Powell Electronics
$3.190
$3.010
$2.370
TTI
$2.270
Digiode
$2.100
Nova Conductors
$2.307
TestEquity
IBS Electronics
$5.021
$4.250
$3.969
Flip Electronics
Vyrian
VNN
Semicontronic
$1.690
$1.648
$1.639
Corphita
$1.989
Argo Parts USA
Netroflash
$2.192
$2.146
Continental Prestige Electronics
$3.940
$2.480
$2.050
Aztec Data Supply Inc.
$9.714
Andel Nordic
$12.250
$8.575
Robosynatics
Lucentia Tech
Perfect Parts
GreenTree Electronics
High insulation resistance ensures minimal signal loss and interference, resulting in improved transmission quality.
Low insertion loss helps in maintaining signal strength during transmission, ensuring reliable and efficient connectivity.
High dielectric voltage withstand capability ensures safety and reliability in high voltage environments.
Snap coupling type allows for quick and easy connections, saving time and effort during installation.
Polytetrafluoroethylene insulator material provides excellent electrical insulation and high heat resistance for reliable performance.
High maximum operating temperature allows for use in a wide range of environments without compromising performance.
Low minimum operating temperature ensures the connector can function effectively even in extremely cold conditions.
Gold shell finish provides corrosion resistance and excellent conductivity, enhancing the longevity and performance of the connector.
Specifically designed RF MMCX connector ensures compatibility and optimal performance in RF applications.
Low VSWR indicates minimal mismatch between the connector and transmission line, ensuring efficient power transfer.
Withstands 500 cycles of mating and unmating, ensuring long-lasting durability and reliability in repeated use.
Cable mounting type provides easy installation and secure connection, suitable for various cable types such as RG-178.
50 ohm characteristic impedance ensures compatibility with standard signal transmission systems, reducing signal loss and interference.
Brass shell material offers durability, good electrical conductivity, and resistance to corrosion, making it a reliable choice for connectors.
Crimp termination type provides a secure and reliable connection between the cable and connector, ensuring stable signal transmission.
Low withdrawal force allows for easy disconnection while maintaining a secure connection during operation.
Male contact gender is compatible with female connectors, ensuring proper mating and reliable signal transmission.
Low contact resistance minimizes signal loss and ensures efficient power transfer between connected components.
Plug-style body or shell design provides a simple and secure connection, suitable for a wide range of applications.
Straight mounting style allows for easy and direct connection, making it suitable for various applications where a straight connection is required.
Coaxial contact style ensures efficient signal transmission and reduced electromagnetic interference, ideal for RF applications.
High maximum insertion force ensures a secure and reliable connection between the connector and mating port, preventing intermittent signal loss.
Locking mounting option provides additional security and prevents accidental disconnection, ensuring continuous and stable connectivity.
With a maximum operating frequency of 6 GHz, this connector is suitable for high-frequency applications such as RF communication and data transmission.
Designed for commercial applications, this connector offers reliable performance, durability, and compatibility in various commercial electronic systems.
MCX & MMCX Connectors 73415-0971 attributes and parameters. Explore more MCX & MMCX Connectors devices from Molex
Body or Shell Style:
Cable Types:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Coupling Type:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insertion Loss:
Insulation Resistance:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
73415-0971 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
2N2222A
Bytesonic Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Elements: 1;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LL4148
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
MBR0540T1G
MBR0540T1G by Onsemi is a Schottky rectifier diode with max. forward voltage of 0.62V and max. output current of 0.5A, ideal for applications requiring high efficiency power conversion in small outline packages. Operating temp range: -55 to 150°C, with peak reflow temp at 260°C, making it suitable for various electronic devices needing reliable rectification performance in compact designs.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
EU2B-YS303C
Idec
ROTARY SWITCH;
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Sangdest Microelectronics (Nanjing)
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
73415-0971
Molex
MCX-J-P-H-RA-SM1
Samtec
Samtec's MCX-J-P-H-RA-SM1 is a RF MCX connector with 50 ohm impedance, GOLD finish, and SNAP coupling. Ideal for applications requiring surface mount termination, right angle mounting, and operating frequency up to 6 GHz.
73415-1060
Molex 73415-1060 RF MCX Connector has 50 ohm impedance, 1.35 VSWR, and operates up to 6 GHz. Ideal for commercial applications requiring high insulation resistance, with a dielectric voltage of 1400VAC. Features female coax contact in a receptacle shell style for surface mount termination on boards.
MMCX-P-P-H-ST-MT1
Samtec's MMCX-P-P-H-ST-MT1 is a RF MMCX connector with 50 ohm impedance, gold termination finish, and 6 GHz operating frequency. Ideal for commercial applications, it offers high insulation resistance of 1 Gohm and can withstand up to 700VAC dielectric voltage. With a temperature range from -65°C to 125°C, this connector is suitable for various board mounting setups.
MMCX7-J-P-GF-ST-TH1
The Samtec MMCX7-J-P-GF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold over nickel finish, and 6 GHz operating frequency. It is used in commercial applications for board mounting due to its straight jack style and locking option for reliable connections.
MCX7-J-P-H-ST-SM1
Samtec's MCX7-J-P-H-ST-SM1 RF MCX connector has a dielectric voltage of 500VAC, impedance of 75 ohm, and operates up to 6 GHz. With a SNAP coupling type, it is ideal for board mounting in commercial applications requiring high-frequency signal transmission.
919-388P-51S
RF MCX CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
135-3402-101
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Mounting Type: CABLE;
252129
Amphenol 252129 RF MCX Connector features 0.1 dB insertion loss, 1.5 VSWR, and 50 ohm impedance. Ideal for board mounting applications up to 6 GHz frequency range with right angle mounting style.
1408152-1
TE Connectivity
TE Connectivity's 1408152-1 RF MMCX Connector features a 0.177" body length, 0.138" body width, and PTFE insulator material. With a max operating frequency of 6 GHz, it is ideal for commercial applications requiring a durable connector with low insertion loss and high insulation resistance.
1061001-1
TE Connectivity's 1061001-1 is an RF MCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and is suitable for surface mount applications.
MCX7-P-C-H-RA-CA3
Samtec's MCX7-P-C-H-RA-CA3 RF MCX Connector features a 1.3 VSWR, 75 ohm impedance, and operates up to 6 GHz. With a right-angle mounting style, it is ideal for cable termination in high-frequency applications requiring snap coupling and gold over nickel finish.
919-418J-71P12G
RF MCX CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
MCX-J-P-H-ST-EM1
Samtec's MCX-J-P-H-ST-EM1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz frequency for high-performance applications. With gold over nickel finish, this female jack connector is ideal for surface mount board mounting with a temperature range of -65 to 125°C. The snap coupling type ensures secure connections in various electronic systems.
73413-0050
Molex 73413-0050 is a RF MCX connector with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring FEMALE contact gender in JACK body style.
1408148-1
TE Connectivity's 1408148-1 is an RF MMCX connector with a characteristic impedance of 50 ohm and gold termination contact finish. It has a max operating frequency of 6 GHz, making it suitable for commercial applications requiring high-frequency signal transmission. The connector features a slide-on coupling type and panel mounting option, with an insulation resistance of 1 Gohm and operating temperatures ranging from -65 to 165°C.
919-130P-51SX
Amphenol's 919-130P-51SX RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max frequency. Ideal for RG-174 cables, it is a gold-plated male plug with snap coupling for commercial applications.
1-1634000-0
TE Connectivity 1-1634000-0 is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-174A/U cable termination. Featuring gold shell finish and brass shell material, it operates b/w -55 to 155 °C with max frequency of 6 GHz. Ideal for commercial applications requiring reliable snap coupling in straight mounting configuration.
135-9701-201
Bel Fuse
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Manufacturer Series: 135;
133-9701-201
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; IEC Conformity: NO; Mounting Style: STRAIGHT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73415-1471
Molex 73415-1471 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high durability and operating frequency up to 6 GHz.
73415-2063
Molex 73415-2063 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 1.2 VSWR. Ideal for commercial applications with a frequency range up to 6 GHz, offering durability of 500 cycles in board and panel mounting configurations.
73415-0961
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Type: BOARD; Termination Type: SURFACE MOUNT;
73415-1001
The Molex 73415-1001 RF MMCX Connector features a characteristic impedance of 50 ohm, insertion loss of 0.2 dB, and dielectric voltage withstand of 700VAC. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 6 GHz.
73415-0951
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Panel Mount: NO;
73415-1692
Molex 73415-1692 RF MCX Connector has a characteristic impedance of 50Ω, insulator material PTFE, and coupling type SNAP. Ideal for board mounting in applications requiring female contact gender, surface mount termination, and straight mounting style.
73415-2061
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Insertion Force (N): 15.1232; Coupling Type: SNAP;
73415-0963
Molex 73415-0963 RF MMCX Connector features SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for BOARD mounting in RF applications requiring STRAIGHT JACK style connectors.
73415-1121
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Type: CABLE; Panel Mount: NO;
73415-1251
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Body Diameter: .173 inch;
73415-1691
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
73415-0991
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
73415-1002
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: RIGHT ANGLE; Mating Contact Finish: NOT SPECIFIED;
73415-3410
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Contact Material: BERYLLIUM COPPER; Body or Shell Style: JACK; Mounting Type: CABLE;
73415-3210
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73415-4490
RF MCX CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Cable Types: RG-179;
73415-1690
The Molex 73415-1690 is a RF MCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is designed for surface mount termination on boards, making it suitable for various applications in the MCX & MMCX connectors category.
73415-1252
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
73415-0953
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Body Length: .138 inch; Insulator Material: POLYTETRAFLUOROETHYLENE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved