Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol 262103 is an RF MMCX connector with gold contact finish, brass material, and PTFE insulator. It features snap coupling for cable termination in male gender plug style. Ideal for right-angle mounting applications in MCX & MMCX connectors category.
Median Price
$5.148
Lifecycle Status
Suppliers In-Stock
36
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$4.980
100+ parts
$4.150
1k+ parts
$3.891
10k+ parts
-
Interstate Connecting
$4.277
$4.029
Arrow
$5.911
$4.846
$4.556
RS Americas
$6.340
$4.880
Mouser Electronics
$6.500
$4.920
$4.170
DigiKey
$6.820
$4.927
$4.189
$3.927
Newark
$7.570
$6.570
$6.200
Powell Electronics
$8.880
$6.060
Master Electronics
$4.620
$4.030
$3.800
Verical
$3.080
TTI Europe
$3.888
$3.659
$3.517
PSC Electronics
Chip1Stop
$3.610
TTI
$3.750
$3.640
NEP Electronics
FDH Electronics
$0.101
$0.060
$0.058
Nova Conductors
$4.403
DF Sales Co.
$4.800
TestEquity
$5.640
Vyrian
VNN
Semtec, LLC
Shortec Electronics
Mil-Aero Solutions, Inc.
IBS Electronics
$6.480
$5.652
$5.330
PC Components Company LLC
Electro Sonic
$3.340
$3.130
$2.930
R&J Components
First Choice Components Inc.
Atlantic Semiconductor
American Microsemiconductor Inc.
SPM Sales
Resion
Bristol Electronics
Rapid Electronics
$3.297
Abianca Electronics
$2.328
$2.235
Corohmni
$2.400
Ampacity Inc.
$3.070
Semicontronic
$2.993
$2.978
Gateway Technologies
$3.906
$3.476
Aztec Data Supply Inc.
$3.978
Singapore Electronics
$4.296
$3.995
$3.823
$3.651
Argo Parts USA
Continental Prestige Electronics
$4.315
Allen Electronics Distributors
$4.700
Advanced Electronics
$8.216
$7.477
$6.737
AZTECH Wire
$11.050
Andel Nordic
$36.420
$25.497
Authorized Procurement Solutions
Netroflash
$4.183
$4.095
Perfect Parts
Kepictronics
Gold finish provides excellent conductivity and corrosion resistance, ensuring stable signal transmission.
Snap coupling type allows for quick and easy connections, saving time during installation or maintenance.
PTFE insulator material ensures high electrical insulation and mechanical strength, making the connector reliable and durable.
RF MMCX connector is suitable for high frequency applications, offering low signal loss and good signal quality.
Brass contact material is known for its durability and conductivity, maintaining signal integrity over time.
Gold mating contact finish provides reliable and consistent connections, reducing the risk of signal interference or loss.
Cable mounting type allows for secure and stable connection to the cable, reducing the risk of disconnection.
Crimp termination type ensures a strong and secure connection between the connector and the cable, minimizing signal loss.
Male contact gender is commonly used for connecting to female connectors, providing a universal compatibility for various applications.
Plug body style offers a compact and convenient design for easy installation in tight spaces or crowded environments.
Right angle mounting style allows for flexible and space-saving installation, making it ideal for applications with limited space constraints.
MCX & MMCX Connectors 262103 attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
262103 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
NSN
1005-00-805-3709, 1005008053709, 5935-00-729-3745, 5935007293745
NIIN
008053709, 007293745
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
LD1117S33CTR
STMicroelectronics
STMicroelectronics LD1117S33CTR is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It operates within an input voltage range of 4.75V to 15V, making it suitable for various applications requiring stable voltage regulation in compact designs. The device features low dropout voltage of 1.3V, high temperature operation up to 125°C, and small outline package style for space-constrained PCB layouts.
1N4148WT
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain Current (Abs) (ID): .2 A; Maximum Feedback Capacitance (Crss): 8 pF;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
BAV99
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
252103
Amphenol
Amphenol 252103 RF MCX Connector features 0.1 dB insertion loss, GOLD termination contact finish, and SNAP coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
73415-1001
Molex
The Molex 73415-1001 RF MMCX Connector features a characteristic impedance of 50 ohm, insertion loss of 0.2 dB, and dielectric voltage withstand of 700VAC. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 6 GHz.
82_MMCX-50-0-8/111_OE
Huber+suhner Ag
82_MMCX-50-0-8/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features gold (Au) termination contact finish, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator material, and operates up to 6 GHz. Ideal for commercial applications requiring durable connectors with surface mount termination.
133-8701-211
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Type: BOARD; Characteristic Impedance: 75 ohm;
82_MCX-S50-0-22/111_NM
82_MCX-S50-0-22/111_NM by Huber+suhner Ag is a RF MCX CONNECTOR with 50 ohm impedance, gold-plated BERYLLIUM COPPER contacts, and SNAP coupling. It has an insulation resistance of 10^10 ohm, dielectric voltage of 1060VAC, and operates b/w -55 to 155 °C. Ideal for board mounting in applications requiring high durability and frequency up to 6 GHz.
133-3711-318
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; IEC Conformity: NO; MIL Conformity: YES;
73415-4490
Molex 73415-4490 is a RF MCX connector with gold nickel finish, snap coupling, and 75 ohm impedance. Ideal for RG-179 cable termination in applications up to 6 GHz frequency range. Features crimp termination, male contact gender, and straight plug body style with locking mounting option.
135-3403-101
Bel Fuse
Bel Fuse's 135-3403-101 RF MMCX Connector features a dielectric voltage of 707VAC, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for commercial applications, it is designed for use with cables like RG-161, RG-174, and RG-179 at frequencies up to 6 GHz.
R113.426.000W
Radiall S A
R113.426.000W by Radiall S A is a RF MCX CONNECTOR with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR. Ideal for board and panel mounting in applications requiring high durability up to 6 GHz frequency range.
MCX7-J-P-H-ST-TH1
Samtec
Samtec's MCX7-J-P-H-ST-TH1 RF MCX Connector has a 75 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for board and panel mounting in applications requiring high-quality signal transmission with a female contact gender.
1408148-1
Tyco Electronics Elcon
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Body or Shell Style: PLUG; Termination Type: CRIMP; Maximum Operating Frequency: 6 GHz;
16_MMCX-50-2-4/111_OE
16_MMCX-50-2-4/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-174/U cable types. Featuring a snap coupling type and gold shell finish, it operates b/w -55 to 155 °C, making it ideal for commercial applications up to 6 GHz frequency.
1061023-1
TE Connectivity's 1061023-1 RF MCX Connector features a 0.391" body length, 0.1 dB insertion loss, and 50 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max frequency of 6 GHz.
MMCX-P-P-H-ST-EM1
Samtec's MMCX-P-P-H-ST-EM1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for commercial applications, it features gold termination finish, PTFE insulator material, and brass shell construction for reliable performance in temperatures ranging from -65 to 125°C.
R113424000
Radiall S A's R113424000 RF MCX Connector features 0.07 dB insertion loss, 1.12 VSWR, and 50 ohm impedance for up to 6 GHz applications. With a gold over nickel finish and PTFE insulator, this surface mount connector is ideal for board mounting in high-frequency systems requiring reliable signal transmission.
MMCX7-P-C-GF-ST-CA3
RF MMCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
133-3711-312
Bel Fuse 133-3711-312 is an RF MCX connector with 50 ohm impedance, PTFE insulator, and brass shell. Operating at -65 to 165°C, it withstands up to 1400VAC and offers durability of 500 cycles. Ideal for board mounting in applications requiring a reliable female jack connector up to 6 GHz.
133-8433-101
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Insertion Loss: .2 dB; Additional Features: APPLICABLE CABLES: RG-179, INSERTION LOSS MAX AT 1 GHZ;
135-3402-101
The Bel Fuse 135-3402-101 is an RF MMCX connector with a characteristic impedance of 50 ohm and insertion loss of 0.2 dB. It is suitable for applications requiring high durability, such as commercial-grade communication systems operating up to 6 GHz frequency range. The connector features a snap coupling type, gold shell finish, and polytetrafluoroethylene insulator material.
73415-0970
Molex 73415-0970 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for commercial applications with a frequency range up to 6 GHz, this connector offers durability with 500 cycles and operates b/w -55°C to 165°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
262101
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mounting Style: STRAIGHT; Mounting Type: CABLE;
262104
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; IEC Conformity: NO; Coupling Type: SNAP;
262102
Amphenol 262102 is an RF MMCX connector with 0.276" body depth, gold shell finish, and PTFE insulator. It is a right-angle plug for cable termination in MCX/MMCX applications. Suitable for commercial use, offering reliable coaxial connections.
262107
Amphenol 262107 is an RF MMCX connector with gold termination, ideal for board mounting. Featuring a female contact gender and PTFE insulator material, it offers reliable connectivity in various applications like telecommunications and networking equipment.
262105
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: RIGHT ANGLE; Body or Shell Style: JACK; Contact Material: NOT SPECIFIED;
262105-11
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
262118
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Coupling Type: SNAP; Additional Features: APPLICABLE CABLES: RG-174/U; RG-188A/U; RG-316/U; MIL Conformity: NO;
262100
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLES: RG-178B/U; RG-196A/U; Contact Material: NOT SPECIFIED; Body or Shell Style: PLUG;
262110
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 262110; Body or Shell Style: PLUG; IEC Conformity: NO;
262111
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; Panel Mount: NO; Mounting Type: CABLE;
262113
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Filter Feature: NO; Coupling Type: SNAP;
262127
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: CRIMP; DIN Conformance: NO; Filter Feature: NO;
262128
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Style: RIGHT ANGLE; MIL Conformity: NO;
262139
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; IEC Conformity: NO; Panel Mount: NO; Mounting Type: CABLE; Manufacturer Series: 262139;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved