Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Type: SURFACE MOUNT; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
Median Price
$2.482
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
PEI Genesis
1+ parts
$1.400
100+ parts
-
1k+ parts
10k+ parts
Powell Electronics
$2.384
$1.324
Interstate Connecting
$2.161
$2.217
Heilind Electronics
$2.500
$2.083
$1.953
Richardson RFPD
$2.520
$1.970
$1.810
Mouser Electronics
$3.700
$2.670
$2.380
$2.190
DigiKey
$2.671
$2.270
$2.128
Newark
$4.800
$3.850
$3.400
Master Electronics
$2.140
$1.780
$1.730
Verical
$2.685
$2.122
Avnet
$2.162
$1.632
$1.484
Chip1Stop
$2.280
Arrow
$2.145
$2.031
Nova Conductors
$2.000
Freelance Electronics
$2.453
$2.575
$2.428
Electro Sonic
$1.870
$1.840
IBS Electronics
$3.001
$2.496
$2.426
Vyrian
VNN
Bristol Electronics
ACDS - Activité Composants Distribution Service
Semtec, LLC
Mil-Aero Solutions, Inc.
Ampacity Inc.
$1.460
Semicontronic
$1.424
$1.416
Argo Parts USA
Continental Prestige Electronics
$1.960
Netroflash
Perfect Parts
Kepictronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
MCX & MMCX Connectors 135-3711-201 attributes and parameters. Explore more MCX & MMCX Connectors devices from Johnson Components
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
135-3711-201 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
1N4148WS
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
FDN5618P
Onsemi
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
BAV99
Transys Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
BSS123,215
NXP Semiconductors
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
Mde Semiconductor
Littelfuse
Vishay Sprague
Promax-johnton
Philips Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Peak Reflow Temperature (C): 260; Terminal Finish: MATTE TIN; Maximum Reverse Recovery Time: .006 us;
SS14
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
MBRS340T3G
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
261
Deltrol Controls
Other Relays;
1060984-1
TE Connectivity
TE Connectivity's 1060984-1 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting applications, this female jack connector has a nickel/gold finish and operates b/w -65 to 165 °C.
73415-1691
Molex
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
135-3701-311
Bel Fuse
Bel Fuse 135-3701-311 is an RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers a dielectric voltage of 700VAC and operates b/w -55°C to 155°C. With brass shell material and solder termination, it provides durability of 500 cycles in board mounting configurations.
919-388P-51S
Amphenol
RF MCX CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
MMCX-J-P-H-ST-EM1
Samtec
MMCX-J-P-H-ST-EM1 by Samtec is a RF MMCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and can withstand temperatures ranging from -65 to 125°C. This connector is commonly used in commercial applications requiring high-frequency signal transmission.
MMCX-P-P-H-ST-TH1
Samtec's MMCX-P-P-H-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz operating frequency. Ideal for commercial applications, it features a 0.138" body diameter, -65 to 125 °C temperature range, and 700VAC dielectric voltage.
73415-0970
Molex 73415-0970 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for commercial applications with a frequency range up to 6 GHz, this connector offers durability with 500 cycles and operates b/w -55°C to 165°C.
133-8433-101
Bel Fuse 133-8433-101 is an RF MCX connector with 1.07 VSWR, 0.2 dB insertion loss, and 1400VAC dielectric voltage. Ideal for RG-179 cables in applications requiring a durable, right-angle plug with 75 ohm impedance and PTFE insulator material.
1061092-1
TE Connectivity's 1061092-1 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting applications, this female jack connector with brass shell is designed for high-frequency signal transmission in various electronic devices.
262102
Amphenol 262102 is an RF MMCX connector with 0.276" body depth, gold shell finish, and PTFE insulator. It is a right-angle plug for cable termination in MCX/MMCX applications. Suitable for commercial use, offering reliable coaxial connections.
919-389P-51A
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
135-3403-101
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .2 dB; Additional Features: APPLICABLE CABLES: RG 316/U; RG 188, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1 GHZ; Voltage Standing Wave Ratio: 1.25;
133-3711-318
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; IEC Conformity: NO; MIL Conformity: YES;
RF178-03RP1-SING-0200
RF MCX CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: GOLD; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
919-418J-71P12G
RF MCX CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
262105
Amphenol 262105 is an RF MMCX connector with SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for board mounting with SOLDER termination in JACK body style. Commonly used in MCX & MMCX applications requiring RIGHT ANGLE mounting.
1060995-1
TE Connectivity's 1060995-1 RF MCX Connector features 0.177" body diameter, 0.1 dB insertion loss, and 50 ohm characteristic impedance. Ideal for commercial applications with a frequency range up to 6 GHz, this female jack connector is designed for board mounting with TFE insulator material and gold shell finish.
MCX7-J-P-HN-RA-TH1
Samtec's MCX7-J-P-HN-RA-TH1 RF MCX Connector features 75 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for board mounting applications requiring a straight jack with solder termination for high-frequency signal transmission.
252103
Amphenol 252103 RF MCX Connector features 0.1 dB insertion loss, GOLD termination contact finish, and SNAP coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
1512
SPC TECHNOLOGY/ MULTICOMP
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Insertion Loss: .1 dB; Mounting Option-1: LOCKING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
135-3701-201
135-3701-201 by Bel Fuse is an RF MMCX connector with a characteristic impedance of 50 ohm, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage rating of 700VAC and insulation resistance of 1 Gohm, it offers reliable performance in temperatures ranging from -55 to 155 °C. This snap-coupling type connector has a durable brass shell and PTFE insulator, ideal for board mounting with a locking option.
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; DIN Conformance: NO;
Johnson Components
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Insertion Loss: .1 dB; Characteristic Impedance: 50 ohm;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Body or Shell Style: RECEPTACLE;
135-3402-101
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Body or Shell Style: PLUG; IEC Conformity: NO;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 707VAC; Shell Material: BRASS;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mounting Type: CABLE; Characteristic Impedance: 50 ohm;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Mounting Type: CABLE;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Mounting Style: RIGHT ANGLE; Maximum Operating Frequency: 6 GHz;
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body Depth: .256 inch; Maximum Operating Temperature (Cel): 155;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: MMCX; Termination Contact Finish: GOLD (30); Mounting Style: RIGHT ANGLE;
Bel Fuse's 135-3403-101 RF MMCX Connector features a dielectric voltage of 707VAC, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for commercial applications, it is designed for use with cables like RG-161, RG-174, and RG-179 at frequencies up to 6 GHz.
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD OVER NICKEL; Filter Feature: NO; MIL Conformity: NO;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Insertion Loss: .2 dB;
135-3711-201
Bel Fuse 135-3711-201 is an RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers high durability with 500 cycles and operates b/w -55°C to 155°C. Ideal for board mounting, this connector ensures reliable signal transmission with low contact resistance of 8 mohm.
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SURFACE MOUNT; Mating Contact Finish: NOT SPECIFIED;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Minimum Withdrawal Force (N): 6.2272;
135-3711-202
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; DIN Conformance: NO; Characteristic Impedance: 50 ohm; Termination Contact Finish: Gold (Au);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved