Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Bel Fuse 135-3701-311 is an RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers a dielectric voltage of 700VAC and operates b/w -55°C to 155°C. With brass shell material and solder termination, it provides durability of 500 cycles in board mounting configurations.
Median Price
$5.304
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Arrow
1+ parts
$0.906
100+ parts
-
1k+ parts
10k+ parts
PEI Genesis
$4.080
$3.640
DigiKey
$4.930
$4.310
Heilind Electronics
$5.120
$4.129
$4.000
Interstate Connecting
$5.407
$4.492
$4.232
Chip1Stop
$5.696
Mouser Electronics
$7.340
$5.300
$4.850
Newark
$8.490
$6.740
$6.180
Master Electronics
$5.200
$4.720
$4.700
Verical
$6.357
$5.591
Nova Conductors
$4.293
DF Sales Co.
$6.400
Component Electronics Inc.
$7.690
$5.770
$5.000
IBS Electronics
$7.332
$6.655
$6.627
Vyrian
Electro Sonic
$4.140
$3.870
$3.650
Sensible Micro Corp
ACDS - Activité Composants Distribution Service
Standard Data Resources
Bristol Electronics
VNN
Flex Direct, LLC
Bisco
Prism Electronics
Ampacity Inc.
$3.420
Aranea Global
$4.208
$4.039
Continental Prestige Electronics
Argo Parts USA
Corohmni
$9.956
Advanced Electronics
$10.611
$9.656
$8.701
Kepictronics
Perfect Parts
Glotronic Ltd.
Cyclops Electronics Ltd (Excess)
High insulation resistance ensures signal integrity and prevents signal leakage, making this product a reliable choice for maintaining consistent performance.
With a high maximum operating frequency, this product is suitable for high-speed data transmission applications, making it a versatile option for various communication needs.
With a durability rating of 500 cycles, this connector can withstand frequent connecting and disconnecting, ensuring long-term reliability and longevity.
The right-angle mounting style allows for easy installation in tight spaces or on circuit boards where vertical clearance is limited, providing flexibility in design and placement.
MCX & MMCX Connectors 135-3701-311 attributes and parameters. Explore more MCX & MMCX Connectors devices from Bel Fuse
Body Width:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
Manufacturer Series:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Minimum Withdrawal Force (N):
135-3701-311 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Founded in 1949, Bel designs, manufactures and markets a broad array of products that power, protect and connect electronic circuits. With over 70 years of experience, Bel has reliably demonstrated the ability to succeed in a variety of product areas.
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
1N4148WS
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
1N4148WT
Good-ark Electronics
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Daco Semiconductor
2N2222A
Swampscott Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
LL4148
First Components International
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Current-1: 1.5 A; No. of Outputs: 1; Qualification Status: Not Qualified;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
16_MMCX-50-1-1/111_OE
Huber+suhner Ag
16_MMCX-50-1-1/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-196A/U cable types. It features gold-plated beryllium copper contacts, operates up to 6 GHz frequency, and has a durability of 500 cycles. Ideal for commercial applications requiring reliable right-angle mounting with locking option.
82_MMCX-S50-0-2/111_KH
82_MMCX-S50-0-2/111_KH by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features a snap coupling type, gold shell finish, and can operate b/w -55 to 155 °C. Ideal for board mounting applications, this female jack connector offers durability up to 500 cycles and supports frequencies up to 6 GHz.
20449-001E
I-pex
I-pex 20449-001E RF MCX Connector features SNAP coupling, LIQUID CRYSTAL POLYMER insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 6 GHz, such as board-mounted RF connections with male contact gender.
252107-75
Amphenol
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
73415-4490
Molex
Molex 73415-4490 is a RF MCX connector with gold nickel finish, snap coupling, and 75 ohm impedance. Ideal for RG-179 cable termination in applications up to 6 GHz frequency range. Features crimp termination, male contact gender, and straight plug body style with locking mounting option.
MCX-J-P-H-RA-TH1
Samtec
The Samtec MCX-J-P-H-RA-TH1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz operating frequency. Ideal for board mounting applications requiring a right-angle jack with female coax contact style. With gold over nickel termination finish, this connector ensures reliable signal transmission in temperatures ranging from -65 to 125°C.
MMCX7-P-C-GF-RA-CA3
Samtec's MMCX7-P-C-GF-RA-CA3 is a RF MMCX connector with gold over nickel finish. It has a characteristic impedance of 75 ohm and operates b/w -65 to 125 °C. Ideal for RG-179 cable types, it features snap coupling and PTFE insulator for various applications.
135-3701-201
Johnson Components
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; JESD-609 Code: e4; Insertion Loss: .1 dB; Characteristic Impedance: 50 ohm;
1060995-1
TE Connectivity
TE Connectivity's 1060995-1 RF MCX Connector features 0.177" body diameter, 0.1 dB insertion loss, and 50 ohm characteristic impedance. Ideal for commercial applications with a frequency range up to 6 GHz, this female jack connector is designed for board mounting with TFE insulator material and gold shell finish.
133-3711-317
Bel Fuse
Bel Fuse's 133-3711-317 is an RF MCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and can withstand temperatures ranging from -65 to 165 °C. This surface mount connector is commonly used in commercial applications requiring reliable and durable connections.
135-3403-101
Bel Fuse's 135-3403-101 RF MMCX Connector features a dielectric voltage of 707VAC, 0.2 dB insertion loss, and 50 ohm impedance. Ideal for commercial applications, it is designed for use with cables like RG-161, RG-174, and RG-179 at frequencies up to 6 GHz.
R113.424.000
Radiall S A
R113.424.000 by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR suitable for applications up to 6 GHz frequency range. It features gold over nickel termination finish, PTFE insulator material, and can withstand temperatures from -55 to 155 °C. Ideal for commercial use in board mounting configurations requiring high durability with 500 cycles lifespan.
RF178-03RP1-SING-0750
Samtec RF178-03RP1-SING-0750 is a 50 ohm RF MMCX connector with PTFE insulation, suitable for applications up to 6 GHz. Featuring a 0.157" body length and SNAP coupling, it operates b/w -50°C to 165°C. Ideal for cable termination in high-frequency communication systems.
262107
Amphenol 262107 is an RF MMCX connector with gold termination, ideal for board mounting. Featuring a female contact gender and PTFE insulator material, it offers reliable connectivity in various applications like telecommunications and networking equipment.
1061023-1
TE Connectivity's 1061023-1 RF MCX Connector features a 0.391" body length, 0.1 dB insertion loss, and 50 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max frequency of 6 GHz.
R113665000
The Radiall S A R113665000 is a RF MCX connector with 50 ohm impedance, gold termination finish, and snap coupling. Ideal for board and panel mounting applications up to 6 GHz frequency. Features female contact gender and right angle mounting style for versatile connectivity solutions.
73415-2121
Molex 73415-2121 RF MMCX Connector features gold shell finish, PTFE insulator, and brass shell material. With 50 ohm impedance, it is ideal for commercial applications requiring male coax contact in straight plug style on board mounting.
R213.082.007
R213.082.007 by Radiall S A is an RF MCX connector with a body diameter of 0.228", insulation resistance of 1G ohm, and insertion loss of 0.15 dB. It is used in applications requiring a max operating frequency of 6 GHz, such as commercial reliability testing for cables like RG-179 with termination type crimping.
919-101P-51S1X
Amphenol's 919-101P-51S1X MCX connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. Ideal for RF applications up to 6 GHz with RG-174 cable types, this male plug connector offers a 50 ohm impedance and PTFE insulator material.
1-1634010-0
TE Connectivity 1-1634010-0 is an RF MMCX connector with characteristic impedance of 50 ohm, operating frequency up to 6 GHz. Featuring PTFE insulation material, it has a durability of 500 cycles and operates in temperatures ranging from -55 to 155 °C. Ideal for board mounting applications requiring high-quality female coax connectors.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
135-3701-201 by Bel Fuse is an RF MMCX connector with a characteristic impedance of 50 ohm, suitable for commercial applications up to 6 GHz. Featuring a dielectric voltage rating of 700VAC and insulation resistance of 1 Gohm, it offers reliable performance in temperatures ranging from -55 to 155 °C. This snap-coupling type connector has a durable brass shell and PTFE insulator, ideal for board mounting with a locking option.
Vertiv
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; DIN Conformance: NO;
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Body or Shell Style: RECEPTACLE;
135-3402-101
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Body or Shell Style: PLUG; IEC Conformity: NO;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 707VAC; Shell Material: BRASS;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Mounting Type: CABLE; Characteristic Impedance: 50 ohm;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; IEC Conformity: NO; Mounting Type: CABLE;
135-3701-311
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Additional Features: INSERTION LOSS MAX AT 1 GHZ; Mounting Style: RIGHT ANGLE; Maximum Operating Frequency: 6 GHz;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: MMCX; Termination Contact Finish: GOLD (30); Mounting Style: RIGHT ANGLE;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Insertion Loss: .2 dB; Additional Features: APPLICABLE CABLES: RG 316/U; RG 188, CAPTIVE CONTACT, INSERTION LOSS MAX AT 1 GHZ; Voltage Standing Wave Ratio: 1.25;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD OVER NICKEL; Filter Feature: NO; MIL Conformity: NO;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Insertion Loss: .2 dB;
135-3711-201
Bel Fuse 135-3711-201 is an RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers high durability with 500 cycles and operates b/w -55°C to 155°C. Ideal for board mounting, this connector ensures reliable signal transmission with low contact resistance of 8 mohm.
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SURFACE MOUNT; Mating Contact Finish: NOT SPECIFIED;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Minimum Withdrawal Force (N): 6.2272;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Style: STRAIGHT; Termination Type: SURFACE MOUNT; Additional Features: INSERTION LOSS MAX AT 1 GHZ;
135-3701-206
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Minimum Withdrawal Force (N): 6.2272; Body or Shell Style: JACK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved