Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Amphenol's 908-22101T RF MMCX Connector features gold termination, liquid crystal polymer insulator, and beryllium copper contact material. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting in applications requiring high-frequency signal transmission.
Median Price
$5.640
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Powell Electronics
1+ parts
$2.790
100+ parts
-
1k+ parts
10k+ parts
$2.390
Farnell
$4.830
$4.470
$3.910
Adafruit Industries
$5.579
$5.077
$4.575
Mouser Electronics
$6.760
$5.000
$4.460
$4.220
DigiKey
$6.910
$4.993
$4.457
Newark
$8.460
$6.780
$5.800
Master Electronics
$5.300
$5.200
Arrow
$4.035
Verical
$8.148
Freelance Electronics
$3.400
$3.570
$3.366
TestEquity
Nova Conductors
$5.380
TME
$6.410
$4.630
$4.130
TEDSS.com
$10.000
$1.190
VNN
Mil-Aero Solutions, Inc.
IBS Electronics
$4.642
$4.236
Vyrian
Electro Sonic
$4.200
$4.100
$4.000
Bristol Electronics
Inventory MP
LIBRA Elektronik GmbH
Sunrise Surplus Inc.
Sea View Technologies
Aztec Data Supply Inc.
$1.903
Semicontronic
$2.920
$2.847
$2.832
Corohmni
$4.726
Gateway Technologies
$4.788
Netroflash
$5.111
$5.003
Advanced Electronics
Singapore Electronics
$5.918
$5.503
$5.267
$5.030
Ampacity Inc.
$6.680
Andel Nordic
$41.350
$28.947
Perfect Parts
GreenTree Electronics
Argo Parts USA
Continental Prestige Electronics
$3.940
Computer Components Inc. - USA
Kepictronics
EMSNET (Excess)
Speed Components Ltd (Excess)
Gold finish provides excellent conductivity and corrosion resistance, ensuring reliable signal transmission.
Snap coupling allows for quick and secure connections, making installation and maintenance easy.
Liquid crystal polymer offers high mechanical strength and thermal stability, ensuring durability in various environments.
RF MMCX connectors are ideal for high-frequency applications and provide a compact design for space-constrained installations.
Beryllium copper offers superior electrical conductivity and resilience, ensuring long-lasting performance.
Low VSWR of 1.4 indicates minimal signal reflection and efficient power transfer, resulting in high-quality signal transmission.
Board mounting provides a secure and stable connection to the circuit board, reducing signal loss and ensuring reliable performance.
50 ohm impedance matching is suitable for most RF applications, ensuring maximum power transfer and signal integrity.
Surface mount termination allows for easy and convenient installation on PCBs, saving time and effort during assembly.
Female contact gender ensures compatibility with standard male connectors, offering versatile connectivity options.
Jack body style provides a standard interface for connecting with various devices, offering interoperability and ease of use.
Straight mounting configuration simplifies installation and ensures proper alignment for optimal signal transmission.
With a maximum frequency of 6 GHz, this connector is suitable for high-speed data transmission and wireless communication applications.
MCX & MMCX Connectors 908-22101T attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Info.:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
908-22101T Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
STM32H743XIH6
STMicroelectronics
STM32H743XIH6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 36-Ch 16-Bit ADC, and 2-Ch 12-Bit DAC. It operates at up to 48 MHz, has 1085440 bytes of RAM, and offers connectivity options like CAN, I2C, USB. Ideal for industrial applications requiring high-performance processing and extensive peripheral support.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Hitano Enterprise
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Meritek Electronics
MMCX-J-P-H-RA-SM1
Samtec
Samtec's MMCX-J-P-H-RA-SM1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz frequency. Ideal for board mounting applications requiring a right angle jack with surface mount termination. Offers high insulation resistance of 1Gohm and dielectric voltage withstand of 700VAC.
135-3403-101
Johnson Components
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: GOLD OVER NICKEL; Filter Feature: NO; MIL Conformity: NO;
73415-1252
Molex
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
252103
Amphenol
Amphenol 252103 RF MCX Connector features 0.1 dB insertion loss, GOLD termination contact finish, and SNAP coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
252107-75
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
1060772-2
TE Connectivity
TE Connectivity's 1060772-2 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for semi-rigid cables, it is a male plug with snap coupling for applications requiring high-frequency signal transmission.
R113182000
Radiall S A
Radiall S A R113182000 RF MCX Connector features 50 ohm impedance, 1.1 VSWR, and operates up to 6 GHz. With gold-plated contacts and PTFE insulator, it is ideal for high-frequency cable connections in various applications.
MMCX7-J-P-HF-ST-TH1
The Samtec MMCX7-J-P-HF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold contact finish, and 6 GHz operating frequency. Ideal for commercial applications requiring high reliability, it features a dielectric voltage of 700VAC and insulation resistance of 600MΩ. This board-mounted jack connector has a compact body size of 0.138" x 0.138" x 0.187".
252102
Amphenol 252102 RF MCX Connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
73366-0301
Molex 73366-0301 RF MCX Connector with 50 ohm impedance, 1400VAC dielectric voltage, and 6 GHz frequency is ideal for RG-316 cables in commercial applications. Features include PTFE insulation, gold finish, and zinc alloy shell material for durability. Operating temperatures range from -55 to 85°C with a max insertion force of 11.12N.
MMCX-P-C-H-RA-CA1
The Samtec MMCX-P-C-H-RA-CA1 is a 50 ohm RF MMCX connector with gold finish, suitable for applications up to 6 GHz. Featuring a right angle mounting style and crimp solder termination, it is ideal for cable connections in MCX & MMCX categories. The contact material is beryllium copper, ensuring reliable signal transmission.
1061022-1
Tyco Electronics Amp
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: NO; Termination Type: SOLDER; Mounting Style: RIGHT ANGLE;
73415-1060
Molex 73415-1060 RF MCX Connector has 50 ohm impedance, 1.35 VSWR, and operates up to 6 GHz. Ideal for commercial applications requiring high insulation resistance, with a dielectric voltage of 1400VAC. Features female coax contact in a receptacle shell style for surface mount termination on boards.
66012102111404
Wuerth Elektronik & Kg
82_MCX-50-0-19/111_NH-1
Huber+suhner Ag
82_MCX-50-0-19/111_NH-1 by Huber+suhner Ag is a RF MCX CONNECTOR with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring a durable brass shell and PERFLUOROALKOXY/POLYTETRAFLUORO ETHYLENE insulator, it offers reliable performance in temperatures ranging from -55 to 155 °C. With a SNAP coupling type and FEMALE contact gender, this connector is designed for BOARD mounting with STRAIGHT orientation.
73366-0013
The Molex 73366-0013 is a RF MCX connector with a characteristic impedance of 50 ohm. It has an insertion loss of 0.45 dB and can withstand voltages up to 1050VAC. This connector is commonly used in commercial applications requiring reliable connections at frequencies up to 6 GHz.
133-8433-101
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX;
1-1634002-0
TE Connectivity 1-1634002-0 is an RF MMCX connector with gold finish, suitable for RG-174 cable termination. Featuring a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -55 to 155°C.
82_MMCX-50-0-8/111_OE
82_MMCX-50-0-8/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm. It features gold (Au) termination contact finish, PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE insulator material, and operates up to 6 GHz. Ideal for commercial applications requiring durable connectors with surface mount termination.
1085221-1
TE Connectivity's 1085221-1 RF MCX Connector features a 0.2 dB insertion loss, 50 ohm characteristic impedance, and 4 GHz max operating frequency. Ideal for commercial applications requiring a male plug with solder termination on a board mount.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
908-22101
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Contact Resistance: 10 mohm;
908-22101-TC
Amphenol's 908-22101-TC RF MMCX Connector features GOLD finish, LIQUID CRYSTAL POLYMER insulator, and BERYLLIUM COPPER contact material. With a 50 ohm impedance and 6 GHz operating frequency, it is ideal for high-frequency applications requiring surface mount termination in MCX & MMCX Connectors.
908-22106
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Body Depth: .177 inch;
908-22100
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mating Contact Finish: NOT SPECIFIED;
908-22101B
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; MIL Conformity: NO; Mating Contact Finish: GOLD;
908-22103
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Manufacturer Series: MMCX; Characteristic Impedance: 50 ohm; Mating Contact Finish: GOLD;
908-21102
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Body or Shell Style: PLUG; Insulator Material: PERFLUOROALKOXY/POLYTETRAFLUOROETHYLENE;
908-21100T
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Contact Material: NOT SPECIFIED; Body or Shell Style: PLUG; Mounting Style: STRAIGHT;
908-21100
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Voltage Standing Wave Ratio: 1.4;
908-24100
Amphenol 908-24100 is an RF MMCX connector with a characteristic impedance of 50 ohm and max operating frequency of 6 GHz. It features a dielectric voltage rating of 700VAC, gold termination finish, and perfluoroalkoxy/polytetrafluoroethylene insulator material. Ideal for board mounting in commercial applications requiring durability and low contact resistance.
908-21103
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; Voltage Standing Wave Ratio: 1.4; Termination Contact Finish: GOLD;
908-22100T
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Operating Temperature (Cel): 155;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved