Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 73415-1002 RF MMCX Connector features 0.2 dB insertion loss, 50 ohm impedance, and 6 GHz operating frequency. Ideal for commercial applications requiring durable board mounting with right angle coaxial contact style.
Median Price
$5.770
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Farnell
1+ parts
$6.270
100+ parts
$4.150
1k+ parts
$3.900
10k+ parts
-
Element14
$6.433
$4.502
$4.323
Mouser Electronics
$7.530
$5.430
$4.620
DigiKey
$9.410
$6.749
$5.604
Verical
$5.239
$4.729
$3.973
TTI Europe
Master Electronics
$5.410
$4.600
$3.690
Newark
$5.020
$4.900
Powell Electronics
$4.910
$4.290
Distrelec
Chip1Stop
$3.490
Nova Conductors
$3.732
TestEquity
$5.720
Digiode
$6.111
Rapid Electronics
$6.690
TME
$7.290
$4.810
$4.580
IBS Electronics
$6.437
$5.470
$4.390
VNN
Vyrian
Andel Nordic
$1.063
$1.020
Semicontronic
$2.970
$2.896
$2.881
Continental Prestige Electronics
$3.658
Argo Parts USA
Advanced Electronics
$3.807
Corphita
$5.790
Aztec Data Supply Inc.
$10.075
Kepictronics
Authorized Procurement Solutions
Netroflash
$3.546
$3.471
Perfect Parts
Eastek
Compact size allows for easy installation in tight spaces.
High insulation resistance ensures minimal signal loss and interference.
Low insertion loss ensures efficient transmission of signals.
Slim design helps in saving space and maintaining a tidy installation.
High dielectric voltage withstand capability ensures safety and reliability.
Polytetrafluoroethylene material provides excellent insulation and stability.
High operating temperature range allows for versatile usage in various environments.
Wide temperature range ensures functionality in extreme conditions.
Gold finish provides corrosion resistance and enhanced conductivity.
MMCX connector type offers secure and reliable RF connections.
Low VSWR indicates efficient power transfer and signal integrity.
500 cycle durability ensures long-lasting performance and reliability.
Board mounting type provides secure attachment and stability.
Standard 50 ohm impedance for compatibility with various RF systems.
Brass shell material offers durability and conductivity for superior performance.
Solder termination ensures strong and stable electrical connections.
Low withdrawal force allows for easy disconnection while maintaining secure connections.
Female contact gender for compatibility with male connectors.
Low contact resistance ensures minimal signal loss and better conductivity.
Jack style shell for secure and reliable connections.
Right angle mounting style allows for flexible installation options.
Coaxial contact style for efficient signal transmission.
High insertion force for secure and stable connections.
Optimal terminal length for efficient signal transmission.
Locking mounting option for extra security and stability.
High operating frequency capability for handling high-speed data transmission.
Commercial grade reliability ensures consistent performance in professional applications.
MCX & MMCX Connectors 73415-1002 attributes and parameters. Explore more MCX & MMCX Connectors devices from Molex
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Resistance:
Contact Style:
Dielectric Withstanding Voltage (V):
Durability:
Maximum Insertion Force (N):
Insertion Loss:
Insulation Resistance:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
Minimum Withdrawal Force (N):
73415-1002 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LL4148
Taitron Components
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
Grande Electronics
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
Bharat Electronics
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
Telcom Semiconductor
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
MURS160T3G
Onsemi
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
DS18B20Z+T&R
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Body Material: PLASTIC/EPOXY;
MCX-J-P-H-ST-EM1
Samtec
Samtec's MCX-J-P-H-ST-EM1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz frequency for high-performance applications. With gold over nickel finish, this female jack connector is ideal for surface mount board mounting with a temperature range of -65 to 125°C. The snap coupling type ensures secure connections in various electronic systems.
66012102111404
Wuerth Elektronik & Kg
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
MMCX-J-P-H-ST-MT1
Samtec's MMCX-J-P-H-ST-MT1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 125°C operating temp. Ideal for commercial applications, it features brass shell material, PTFE insulator, and snap coupling for reliable performance in board mounting setups.
73413-0050
Molex
Molex 73413-0050 is a RF MCX connector with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring FEMALE contact gender in JACK body style.
MCX7-P-C-H-ST-CA3
Samtec's MCX7-P-C-H-ST-CA3 is a RF MCX connector with 75 ohm impedance, gold finish, and snap coupling. Ideal for applications requiring a max frequency of 6 GHz, this male plug connector is designed for cable mounting using crimp solder termination.
73415-3410
Molex 73415-3410 RF MMCX Connector features gold/nickel termination, beryllium copper contact material, and 50 ohm impedance. Ideal for commercial applications requiring a crimp termination on cables with straight mounting and locking option.
133-3711-312
Bel Fuse
Bel Fuse 133-3711-312 is an RF MCX connector with 50 ohm impedance, PTFE insulator, and brass shell. Operating at -65 to 165°C, it withstands up to 1400VAC and offers durability of 500 cycles. Ideal for board mounting in applications requiring a reliable female jack connector up to 6 GHz.
R113240000
Radiall S A
The Radiall S A R113240000 RF MCX Connector has a 50 ohm impedance, gold termination finish, and operates up to 6 GHz. Ideal for panel mounting, this connector is commonly used in applications requiring high-frequency signal transmission with low voltage standing wave ratio.
133-8701-211
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD; Filter Feature: NO;
73415-2061
Molex 73415-2061 RF MMCX Connector features gold nickel termination, PTFE insulator, and beryllium copper contact material. With a durability of 500 cycles, it is ideal for commercial applications requiring a 50 ohm characteristic impedance up to 40 GHz frequency range. This panel mount connector has a snap coupling type and operates b/w -55°C to 165°C temperatures.
R113424000
Radiall S A's R113424000 RF MCX Connector features 0.07 dB insertion loss, 1.12 VSWR, and 50 ohm impedance for up to 6 GHz applications. With a gold over nickel finish and PTFE insulator, this surface mount connector is ideal for board mounting in high-frequency systems requiring reliable signal transmission.
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; DIN Conformance: NO; Termination Type: SURFACE MOUNT;
MMCX-J-P-H-RA-TH1
Samtec's MMCX-J-P-H-RA-TH1 RF MMCX Connector features a 0.138" body diameter, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for commercial applications requiring a right-angle jack with female contact gender and gold finish for reliable signal transmission.
135-3701-311
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Insulator Material: POLYTETRAFLUOROETHYLENE; Body or Shell Style: RECEPTACLE; Panel Mount: NO;
73415-1472
The Molex 73415-1472 is a RF MMCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is used for board mounting applications, featuring a solder termination type and a female contact gender.
82_MMCX-S50-0-2/111_KE
Huber+suhner Ag
Huber+suhner Ag's 82_MMCX-S50-0-2/111_KE is a RF MMCX connector with gold finish, suitable for board mounting. With 50 ohm impedance and 6 GHz frequency, it offers durability of 500 cycles. Ideal for commercial applications requiring reliable right-angle coax connections.
133-3711-317
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD; Coupling Type: SNAP;
Bel Fuse 135-3701-311 is an RF MMCX connector with 50 ohm impedance, suitable for commercial applications up to 6 GHz. Featuring POLYTETRAFLUOROETHYLENE insulator, it offers a dielectric voltage of 700VAC and operates b/w -55°C to 155°C. With brass shell material and solder termination, it provides durability of 500 cycles in board mounting configurations.
1061030-1
TE Connectivity
TE Connectivity's 1061030-1 RF MCX Connector features a body length of 0.351", insertion loss of 0.1 dB, and insulation resistance of 10^10 ohm. Ideal for applications requiring a right angle mounting style, this connector has a max operating frequency of 6 GHz and is suitable for board mounting with a characteristic impedance of 50 ohm.
262118
Amphenol
Amphenol 262118 is an RF MMCX connector with SNAP coupling, PTFE insulator, and FEMALE contact gender. It is used in MCX & MMCX applications for cable mounting with crimp termination. Ideal for straight jack mounting style setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73415-1471
Molex 73415-1471 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high durability and operating frequency up to 6 GHz.
73415-2063
Molex 73415-2063 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 1.2 VSWR. Ideal for commercial applications with a frequency range up to 6 GHz, offering durability of 500 cycles in board and panel mounting configurations.
73415-0961
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Type: BOARD; Termination Type: SURFACE MOUNT;
73415-1001
The Molex 73415-1001 RF MMCX Connector features a characteristic impedance of 50 ohm, insertion loss of 0.2 dB, and dielectric voltage withstand of 700VAC. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 6 GHz.
73415-0951
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Panel Mount: NO;
73415-1692
Molex 73415-1692 RF MCX Connector has a characteristic impedance of 50Ω, insulator material PTFE, and coupling type SNAP. Ideal for board mounting in applications requiring female contact gender, surface mount termination, and straight mounting style.
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Insertion Force (N): 15.1232; Coupling Type: SNAP;
73415-0963
Molex 73415-0963 RF MMCX Connector features SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for BOARD mounting in RF applications requiring STRAIGHT JACK style connectors.
73415-1121
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Type: CABLE; Panel Mount: NO;
73415-0971
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Option-1: LOCKING;
73415-1251
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Body Diameter: .173 inch;
73415-1691
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
73415-0991
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Contact Material: BERYLLIUM COPPER; Body or Shell Style: JACK; Mounting Type: CABLE;
73415-3210
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73415-4490
RF MCX CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Cable Types: RG-179;
73415-1690
The Molex 73415-1690 is a RF MCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is designed for surface mount termination on boards, making it suitable for various applications in the MCX & MMCX connectors category.
73415-1252
73415-1004
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Minimum Withdrawal Force (N): 5.96032; Maximum Operating Temperature (Cel): 165;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved