Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Filter Feature: NO; IEC Conformity: NO; Mating Contact Finish: GOLD;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
VNN
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Nova Conductors
Digiode
Semicontronic
$4.500
$4.388
$4.365
Ampacity Inc.
$5.500
Aztec Data Supply Inc.
$6.173
AZTECH Wire
$11.640
$11.180
$10.960
$10.740
Continental Prestige Electronics
Argo Parts USA
Corphita
Bastille Electronics
Perfect Parts
MCX & MMCX Connectors 1060772-2 attributes and parameters. Explore more MCX & MMCX Connectors devices from Tyco Electronics Amp
Additional Features:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insertion Loss:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Option:
Panel Mount:
Termination Type:
Voltage Standing Wave Ratio:
1060772-2 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
BSS123-7-F
Diodes Incorporated
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
06035C103KAT2A
KYOCERA AVX
06035C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
DS18B20+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 1.5 mA; Package Equivalence Code: SIP3,.1,50;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
Solid State Devices
AT90CAN128-16AU
Microchip Technology
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
NUP2105LT1G
Onsemi
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Semiconductor Technology
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Synsemi
NXP Semiconductors
908-22106
Amphenol
Amphenol 908-22106 is an RF MMCX connector with gold finish, suitable for board mounting. With a dielectric voltage of 700VAC and impedance of 50 ohm, it operates b/w -55 to 155 °C. Ideal for commercial applications up to 6 GHz frequency due to its durability of 500 cycles and insulation resistance of 1 Gohm.
MCX7-J-P-H-ST-TH1
Samtec
Samtec's MCX7-J-P-H-ST-TH1 RF MCX Connector has a 75 ohm impedance, 6 GHz frequency, and 1.3 VSWR. Ideal for board and panel mounting in applications requiring high-quality signal transmission with a female contact gender.
MMCX7-P-C-GF-RA-CA3
Samtec's MMCX7-P-C-GF-RA-CA3 is a RF MMCX connector with gold over nickel finish. It has a characteristic impedance of 75 ohm and operates b/w -65 to 125 °C. Ideal for RG-179 cable types, it features snap coupling and PTFE insulator for various applications.
MMCX-P-C-H-RA-CA1
The Samtec MMCX-P-C-H-RA-CA1 is a 50 ohm RF MMCX connector with gold finish, suitable for applications up to 6 GHz. Featuring a right angle mounting style and crimp solder termination, it is ideal for cable connections in MCX & MMCX categories. The contact material is beryllium copper, ensuring reliable signal transmission.
1060984-1
Tyco Electronics Amp
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Body or Shell Style: RECEPTACLE;
252127
Amphenol 252127 RF MCX Connector features 50 ohm impedance, 0.1 dB insertion loss, and 1400VAC dielectric voltage. Ideal for commercial applications with RG-178B/U cable type, it offers durability of 500 cycles and operates b/w -55 to 155 °C temperature range.
133-3711-317
Bel Fuse
Bel Fuse's 133-3711-317 is an RF MCX connector with a characteristic impedance of 50 ohm. It has a max operating frequency of 6 GHz and can withstand temperatures ranging from -65 to 165 °C. This surface mount connector is commonly used in commercial applications requiring reliable and durable connections.
919-382J-51P
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
133-8701-211
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD; Filter Feature: NO;
133-3711-311
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mounting Type: BOARD; Characteristic Impedance: 50 ohm;
135-3701-201
Cinch Connectivity Solutions
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: BOARD; Mounting Style: STRAIGHT; Body or Shell Style: RECEPTACLE;
73415-1691
Molex
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
73415-1252
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
R113426000
Radiall S A
R113426000 by Radiall S A is a RF MCX connector with 50 ohm impedance, gold termination, and snap coupling. Ideal for applications up to 6 GHz frequency, it features a VSWR of 1.12 and PTFE insulator for reliable performance in board and panel mounting setups.
829558-2
TE Connectivity
TE Connectivity's 829558-2 RF MCX Connector has a characteristic impedance of 50 ohm, with a max operating frequency of 6 GHz. Featuring a gold shell finish and PTFE insulator material, it is ideal for commercial applications requiring reliable signal transmission at temperatures ranging from -65 to 125 °C.
MMCX-J-P-H-ST-SM1-TR
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
16_MMCX-50-2-4/111_OE
Huber+suhner Ag
16_MMCX-50-2-4/111_OE by Huber+suhner Ag is a RF MMCX connector with characteristic impedance of 50 ohm, suitable for RG-174/U cable types. Featuring a snap coupling type and gold shell finish, it operates b/w -55 to 155 °C, making it ideal for commercial applications up to 6 GHz frequency.
919-130P-51SX
Amphenol's 919-130P-51SX RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max frequency. Ideal for RG-174 cables, it is a gold-plated male plug with snap coupling for commercial applications.
MCX7-P-C-H-ST-CA3
Samtec's MCX7-P-C-H-ST-CA3 is a RF MCX connector with 75 ohm impedance, gold finish, and snap coupling. Ideal for applications requiring a max frequency of 6 GHz, this male plug connector is designed for cable mounting using crimp solder termination.
82_MCX-S50-0-29/111_NE
82_MCX-S50-0-29/111_NE by Huber+suhner Ag is a RF MCX CONNECTOR with characteristic impedance of 50 ohm, suitable for applications up to 6 GHz. Featuring a durable design with gold mating contact finish over nickel, it is ideal for commercial use in board mounting configurations. The connector offers a snap coupling type and surface mount termination, ensuring reliable performance in various electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; No. of Connectors: ONE; Termination Type: SOLDER; Characteristic Impedance: 50 ohm;
1060985-1
TE Connectivity's 1060985-1 RF MCX Connector features a 50 ohm characteristic impedance, 0.1 dB insertion loss, and 10000000000 ohm insulation resistance. Ideal for commercial applications requiring a straight jack with female coax contact style, this connector operates up to 6 GHz frequency range on boards with solder termination.
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Contact Material: BERYLLIUM COPPER; Characteristic Impedance: 50 ohm; Maximum Operating Frequency: 6 GHz;
1060995-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Option-1: LOCKING;
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
1060772-2
TE Connectivity's 1060772-2 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for semi-rigid cables, it is a male plug with snap coupling for applications requiring high-frequency signal transmission.
1060783-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Insulator Material: POLYTETRAFLUOROETHYLENE; JESD-609 Code: e4;
1060772-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Panel Mount: NO; Additional Features: APPLICABLE CABLE: RG-405/U, INSERTION LOSS MAX AT 1000 MHZ; IEC Conformity: NO;
1060774-2
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Style: STRAIGHT; Insulator Material: POLYTETRAFLUOROETHYLENE;
1060787-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Voltage Standing Wave Ratio: 1.35; Maximum Operating Frequency: 6 GHz; Mating Contact Finish: GOLD;
1060788-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 1060788; Filter Feature: NO; Characteristic Impedance: 50 ohm;
1060811-2
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Voltage Standing Wave Ratio: 1.35; Mounting Style: STRAIGHT;
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Additional Features: APPLICABLE CABLE: RG-405/U, INSERTION LOSS MAX AT 1000 MHZ; Mounting Type: CABLE; Insertion Loss: .1 dB;
1060774-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; DIN Conformance: NO; JESD-609 Code: e4;
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; No. of Connectors: ONE; Mounting Style: STRAIGHT;
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Characteristic Impedance: 50 ohm;
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; JESD-609 Code: e0; Mounting Type: CABLE;
1060782-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Manufacturer Series: 1060782; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
1060785-1
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Type: CABLE; Termination Type: SOLDER;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved