Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$2.270
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Heilind Electronics
1+ parts
$2.040
100+ parts
$1.700
1k+ parts
$1.619
10k+ parts
-
Interstate Connecting
$2.148
$1.871
$1.731
Mouser Electronics
$2.940
$2.120
$1.800
$1.660
DigiKey
$2.123
$1.805
$1.692
Newark
$3.460
$2.780
$2.630
Powell Electronics
$1.570
$1.470
Arrow
$2.101
$1.622
$1.505
Master Electronics
$2.070
$1.340
$1.180
Verical
$3.331
TME
$2.880
$2.320
NAC Semi
$2.670
$2.470
VNN
Nova Conductors
ComSIT Distribution GmbH
Electro Sonic
$2.050
$1.580
IBS Electronics
$2.903
$1.879
$1.655
Semtec, LLC
Ampacity Inc.
Continental Prestige Electronics
$1.830
$1.440
Gateway Technologies
$4.000
$3.560
Singapore Electronics
$4.400
$4.092
$3.916
$3.740
Eastek
$31.800
GreenTree Electronics
Argo Parts USA
Kepictronics
Netroflash
Abacus Technologies
MCX & MMCX Connectors 919-382J-51P attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
919-382J-51P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N7002
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
LL4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
Changzhou Galaxy Century Microelectronics
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
1N4148WT
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
133-3711-311
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; MIL Conformity: NO; Termination Type: SURFACE MOUNT;
R113.665.000
Radiall S A
R113.665.000 by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.07 dB insertion loss, and 1.14 VSWR. Ideal for applications requiring high durability, it features POLYTETRAFLUOROETHYLENE insulation material and operates b/w -55 to 155°C temperature range at frequencies up to 6 GHz.
73415-4490
Molex
Molex 73415-4490 is a RF MCX connector with gold nickel finish, snap coupling, and 75 ohm impedance. Ideal for RG-179 cable termination in applications up to 6 GHz frequency range. Features crimp termination, male contact gender, and straight plug body style with locking mounting option.
MMCX-J-P-H-ST-SM1-K-TR
Samtec
Samtec's MMCX-J-P-H-ST-SM1-K-TR is a 50 ohm RF MMCX connector with POLYTETRAFLUOROETHYLENE insulator. Featuring a 0.136" body diameter and 0.197" body depth, it is ideal for surface mount board applications requiring a reliable female jack connector with brass shell material.
R113426000
R113426000 by Radiall S A is a RF MCX connector with 50 ohm impedance, gold termination, and snap coupling. Ideal for applications up to 6 GHz frequency, it features a VSWR of 1.12 and PTFE insulator for reliable performance in board and panel mounting setups.
908-22101T
Amphenol
Amphenol's 908-22101T RF MMCX Connector features gold termination, liquid crystal polymer insulator, and beryllium copper contact material. With a characteristic impedance of 50 ohm and max operating frequency of 6 GHz, it is ideal for board mounting in applications requiring high-frequency signal transmission.
1060984-1
TE Connectivity
TE Connectivity's 1060984-1 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting applications, this female jack connector has a nickel/gold finish and operates b/w -65 to 165 °C.
1512
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Insertion Loss: .1 dB; Mounting Option-1: LOCKING;
133-8433-101
Cinch Connectivity Solutions
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 75 ohm; Mating Contact Finish: GOLD (30); MIL Conformity: NO;
135-3403-101
Vertiv
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Insertion Loss: .2 dB;
252102
Amphenol 252102 RF MCX Connector features 0.1 dB insertion loss, gold termination contact finish, and snap coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
133-9701-201
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Maximum Operating Frequency: 6 GHz; Panel Mount: NO;
MMCX7-J-P-GF-ST-TH1
The Samtec MMCX7-J-P-GF-ST-TH1 is a RF MMCX connector with 50 ohm impedance, gold over nickel finish, and 6 GHz operating frequency. It is used in commercial applications for board mounting due to its straight jack style and locking option for reliable connections.
20449-001E
I-pex
I-pex 20449-001E RF MCX Connector features SNAP coupling, LIQUID CRYSTAL POLYMER insulator, and 50 ohm impedance. Ideal for applications requiring a max operating frequency of 6 GHz, such as board-mounted RF connections with male contact gender.
R213082007
Radiall S A's R213082007 is a RF MCX connector with SNAP coupling type, suitable for 75 ohm cables. It has a max operating frequency of 6 GHz and a voltage standing wave ratio of 1.12. This connector is commonly used in telecommunications and high-frequency applications.
73415-1691
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
MCX-J-P-H-ST-EM1
Samtec's MCX-J-P-H-ST-EM1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz frequency for high-performance applications. With gold over nickel finish, this female jack connector is ideal for surface mount board mounting with a temperature range of -65 to 125°C. The snap coupling type ensures secure connections in various electronic systems.
133-3711-312
Bel Fuse
Bel Fuse 133-3711-312 is an RF MCX connector with 50 ohm impedance, PTFE insulator, and brass shell. Operating at -65 to 165°C, it withstands up to 1400VAC and offers durability of 500 cycles. Ideal for board mounting in applications requiring a reliable female jack connector up to 6 GHz.
MCX-J-P-H-ST-TH1
MCX-J-P-H-ST-TH1 by Samtec is a RF MCX connector with 50 ohm impedance, 0.1 dB insertion loss, and 6 GHz operating frequency. Ideal for commercial applications, it features gold over nickel termination finish, PTFE insulator material, and durability of 500 cycles.
135-3701-201
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; DIN Conformance: NO;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
919-388P-51S
RF MCX CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
919-389P-51A
919-383J-51A
919-384J-51P
RF MCX CONNECTOR; JESD-609 Code: e4; Termination Contact Finish: GOLD; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
919-385J-51S
919-386P-51S
919-387P-51A
919-305J-51P
RF MCX CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED;
919-399J-51P
RF MCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved