Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Median Price
$5.440
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
Chip1Stop
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Mouser Electronics
$5.480
$3.900
$3.260
$3.200
Arrow
$5.561
$3.713
$3.194
$3.092
DigiKey
$5.920
$4.275
$3.626
$3.389
Verical
$4.797
$4.160
Master Electronics
$3.690
$2.610
$2.410
Powell Electronics
$3.240
$2.480
IBS Electronics
$5.135
$4.147
$4.038
Gateway Technologies
$10.000
$8.900
Singapore Electronics
$11.000
$10.230
$9.790
$9.349
Andel Nordic
$50.060
$35.042
MCX & MMCX Connectors 919-385J-51S attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Contact Material:
919-385J-51S Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ESD5Z5.0T1G
Onsemi
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
LL4148
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
ULN2803A
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Daco Semiconductor
Rugao Dachang Electronic
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
252103
Amphenol
Amphenol 252103 RF MCX Connector features 0.1 dB insertion loss, GOLD termination contact finish, and SNAP coupling type. With a max operating frequency of 6 GHz, it is ideal for applications requiring a 50 ohm characteristic impedance and male crimp termination on cables.
MCX-J-P-H-ST-EM1
Samtec
Samtec's MCX-J-P-H-ST-EM1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz frequency for high-performance applications. With gold over nickel finish, this female jack connector is ideal for surface mount board mounting with a temperature range of -65 to 125°C. The snap coupling type ensures secure connections in various electronic systems.
252102-75
Amphenol 252102-75 is a RF MCX connector with 0.1 dB insertion loss, 1.5 VSWR, and 6 GHz max operating frequency. It has gold termination contact finish, snap coupling type, and acetal/polytetrafluoroethylene insulator material. Ideal for applications requiring 75 ohm characteristic impedance in cable mounting setups.
133-8701-211
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD; Filter Feature: NO;
133-3711-317
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD; Coupling Type: SNAP;
R113.424.000
Radiall S A
R113.424.000 by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR suitable for applications up to 6 GHz frequency range. It features gold over nickel termination finish, PTFE insulator material, and can withstand temperatures from -55 to 155 °C. Ideal for commercial use in board mounting configurations requiring high durability with 500 cycles lifespan.
MCX-J-P-H-ST-TH1
MCX-J-P-H-ST-TH1 by Samtec is a RF MCX connector with 50 ohm impedance, 0.1 dB insertion loss, and 6 GHz operating frequency. Ideal for commercial applications, it features gold over nickel termination finish, PTFE insulator material, and durability of 500 cycles.
133-3711-312
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Filter Feature: NO; DIN Conformance: NO; Termination Type: SURFACE MOUNT;
82_MCX-S50-0-22/111_NM
Huber+suhner Ag
82_MCX-S50-0-22/111_NM by Huber+suhner Ag is a RF MCX CONNECTOR with 50 ohm impedance, gold-plated BERYLLIUM COPPER contacts, and SNAP coupling. It has an insulation resistance of 10^10 ohm, dielectric voltage of 1060VAC, and operates b/w -55 to 155 °C. Ideal for board mounting in applications requiring high durability and frequency up to 6 GHz.
MCX7-J-P-H-ST-SM1
Samtec's MCX7-J-P-H-ST-SM1 RF MCX connector has a dielectric voltage of 500VAC, impedance of 75 ohm, and operates up to 6 GHz. With a SNAP coupling type, it is ideal for board mounting in commercial applications requiring high-frequency signal transmission.
16_MMCX-50-2-13/111_OE
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: GOLD OVER NICKEL; Contact Material: BRASS;
MCX1252B1-3GT30G-50
Amphenol's MCX1252B1-3GT30G-50 is an RF MCX connector with gold over nickel finish. It features snap coupling, PTFE insulator, and right-angle mounting for board soldering. Ideal for applications requiring male plug connectors in MCX & MMCX categories.
1408152-1
TE Connectivity's 1408152-1 RF MMCX Connector features a 0.177" body length, 0.138" body width, and PTFE insulator material. With a max operating frequency of 6 GHz, it is ideal for commercial applications requiring a durable connector with low insertion loss and high insulation resistance.
R113.182.000
R113.182.000 RF MCX Connector by Radiall S A features 1.22 dB insertion loss, 50 ohm impedance, and gold-plated contacts with nickel barrier. With a durability of 500 cycles, it is ideal for RG-188 cables in applications requiring a max frequency of 6 GHz such as commercial reliability testing.
MCX-J-P-H-ST-SM1
Samtec's MCX-J-P-H-ST-SM1 is a RF MCX connector with 50 ohm impedance, gold finish, and 6 GHz frequency. It is used in board mounting applications for high-frequency signal transmission due to its 1414VAC dielectric voltage rating and -65 to 125 °C operating temperature range.
RF174-03SP1-252564-0100
RF MMCX CONNECTOR; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED;
1-1337584-0
TE Connectivity's 1-1337584-0 RF MCX Connector features a body length of 0.173", insertion loss of 0.2 dB, and dielectric voltage withstand of 1400VAC. Ideal for applications requiring a durable, right-angle mounted connector with characteristic impedance of 50 ohm and rated current signal up to 3A at frequencies up to 6 GHz.
135-3801-201
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Body or Shell Style: RECEPTACLE; Mating Contact Finish: GOLD (30);
82_MMCX-S50-0-2/111_KE
Huber+suhner Ag's 82_MMCX-S50-0-2/111_KE is a RF MMCX connector with gold finish, suitable for board mounting. With 50 ohm impedance and 6 GHz frequency, it offers durability of 500 cycles. Ideal for commercial applications requiring reliable right-angle coax connections.
1512
RF MCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Ports: 1; Insertion Loss: .1 dB; Mounting Option-1: LOCKING;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved