Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF MCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
Median Price
$3.160
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
< 1k
Arrow
1+ parts
$2.264
100+ parts
$1.654
1k+ parts
-
10k+ parts
Newark
$2.420
Element14
$3.660
$2.935
$2.625
Farnell
$4.603
$3.774
$3.366
Mouser Electronics
$4.940
$3.380
$2.730
$2.620
Chip1Stop
$2.710
Verical
$4.108
$3.198
Master Electronics
$2.360
$2.230
Powell Electronics
$2.590
$2.180
Electro Sonic
$3.420
$2.350
$2.190
Gateway Technologies
$8.000
$7.120
Singapore Electronics
$8.800
$8.184
$7.832
$7.480
MCX & MMCX Connectors 919-399J-51P attributes and parameters. Explore more MCX & MMCX Connectors devices from Amphenol
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
919-399J-51P Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Amphenol is one of the world’s largest providers of high-technology interconnect, sensor and antenna solutions. Our products Enable the Electronics Revolution across virtually every end market, including Automotive, Broadband Communications, Commercial Aerospace, Industrial, Information Technology and Data Communications, Military, Mobile Devices and Mobile Networks. Founded in 1932, Amphenol trades on the New York Stock Exchange under the ticker APH and is headquartered in Wallingford, Connecticut, USA.
1N4148
Vicor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
EU2B-YS303C
Idec
ROTARY SWITCH;
Surge Components
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
EU2B-YS2J03C
Continental Device India
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1408148-1
Tyco Electronics Amp
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Characteristic Impedance: 50 ohm; Mating Contact Finish: GOLD;
1061023-1
TE Connectivity
TE Connectivity's 1061023-1 RF MCX Connector features a 0.391" body length, 0.1 dB insertion loss, and 50 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max frequency of 6 GHz.
133-8701-211
Johnson Components
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD; Termination Contact Finish: GOLD; Filter Feature: NO;
133-8433-101
Bel Fuse
Bel Fuse 133-8433-101 is an RF MCX connector with 1.07 VSWR, 0.2 dB insertion loss, and 1400VAC dielectric voltage. Ideal for RG-179 cables in applications requiring a durable, right-angle plug with 75 ohm impedance and PTFE insulator material.
MCX7-P-C-H-ST-CA3
Samtec
Samtec's MCX7-P-C-H-ST-CA3 is a RF MCX connector with 75 ohm impedance, gold finish, and snap coupling. Ideal for applications requiring a max frequency of 6 GHz, this male plug connector is designed for cable mounting using crimp solder termination.
MCX-J-P-H-ST-EM1
Samtec's MCX-J-P-H-ST-EM1 RF connector features a dielectric voltage of 1400VAC, 50 ohm impedance, and 6 GHz frequency for high-performance applications. With gold over nickel finish, this female jack connector is ideal for surface mount board mounting with a temperature range of -65 to 125°C. The snap coupling type ensures secure connections in various electronic systems.
133-3711-317
Vertiv
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: JACK; Mounting Type: BOARD; Coupling Type: SNAP;
908-43300
Amphenol
Amphenol 908-43300 is an RF MMCX connector with 50 ohm impedance, gold finish, and 700VAC dielectric voltage. Ideal for RG-316 cables, it operates b/w -55 to 155°C, withstands 500 cycles, and has a max frequency of 6 GHz. Suitable for commercial applications requiring high durability and low contact resistance.
1061002-1
TE Connectivity's 1061002-1 RF MCX Connector features a body length of 0.231", insertion loss of 0.1 dB, and insulation resistance of 10^10 ohm. Ideal for applications requiring a 50 ohm characteristic impedance, such as commercial-grade RF connections operating up to 6 GHz on boards with solder termination.
1061022-1
TE Connectivity's 1061022-1 RF MCX Connector features a 0.391" body length, 0.1 dB insertion loss, and 50 ohm impedance. Ideal for board mounting in applications requiring a right angle jack with a max operating frequency of 6 GHz.
73415-1121
Molex
Molex 73415-1121 is a RF MMCX connector with gold nickel finish, brass contact material, and 50 ohm impedance. It features snap coupling, male gender, and right angle mounting style. Ideal for cable termination in MCX & MMCX applications.
66012102111404
Wuerth Elektronik & Kg
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
1085221-1
TE Connectivity's 1085221-1 RF MCX Connector features a 0.2 dB insertion loss, 50 ohm characteristic impedance, and 4 GHz max operating frequency. Ideal for commercial applications requiring a male plug with solder termination on a board mount.
MCX7-J-P-H-RA-TH1
Samtec's MCX7-J-P-H-RA-TH1 RF MCX Connector features gold termination, 75 ohm impedance, and 6 GHz frequency. Ideal for board mounting in applications requiring a snap coupling type, such as high-frequency signal transmission.
252107
Amphenol 252107 RF MCX Connector features 0.1 dB insertion loss, GOLD termination, and SNAP coupling. With 50 ohm impedance and 6 GHz frequency, it's ideal for high-frequency applications requiring reliable signal transmission. Suitable for cable mounting with SOLDER termination, this MALE plug connector ensures low VSWR of 1.3 for optimal performance.
1-1634009-0
TE Connectivity 1-1634009-0 is a RF MMCX connector with gold finish, 50 ohm impedance, and durability of 500 cycles. It is used in commercial applications for board mounting at temperatures ranging from -65 to 165 °C, offering high insulation resistance and low contact resistance.
133-3711-311
Cinch Connectivity Solutions
The Cinch Connectivity Solutions 133-3711-311 RF MCX Connector is a gold-finished, right-angle receptacle with a surface mount termination. It operates at a maximum frequency of 6 GHz and has a characteristic impedance of 50 ohms. Its insulator material is polytetrafluoroethylene. This connector is commonly used in general-purpose applications for MCX & MMCX connectors.
MMCX7-P-C-GF-ST-CA3
RF MMCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
R113.426.000W
Radiall S A
R113.426.000W by Radiall S A is a RF MCX CONNECTOR with 50 ohm impedance, 0.07 dB insertion loss, and 1.35 VSWR. Ideal for board and panel mounting in applications requiring high durability up to 6 GHz frequency range.
135-3711-201
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Termination Type: SURFACE MOUNT; Mating Contact Finish: NOT SPECIFIED;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved