Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 73415-1472 is a RF MMCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is used for board mounting applications, featuring a solder termination type and a female contact gender.
Median Price
$2.550
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.512
100+ parts
-
1k+ parts
10k+ parts
Newark
$2.160
Mouser Electronics
$2.910
$2.370
$1.830
$1.720
Farnell
$3.020
$1.690
$1.660
DigiKey
$3.160
$2.209
$1.831
Arrow
$3.288
$2.473
Distrelec
$3.900
Powell Electronics
$1.970
$1.680
$1.470
Verical
$1.833
$1.558
$1.293
TTI
$1.490
$1.370
Master Electronics
$1.980
$1.350
Nova Conductors
$1.299
Digiode
$1.814
TestEquity
$2.290
IBS Electronics
$2.342
$1.992
$1.599
Vyrian
VNN
Corphita
$1.719
Modulus Dynamics
$4.484
Andel Nordic
$10.238
$9.828
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Perfect Parts
SNAP coupling type allows for quick and effortless connection of the MCX & MMCX connectors, saving time and effort for the customer during installation and maintenance.
The insulator material made of POLYTETRAFLUOROETHYLENE ensures long-lasting performance and protection against environmental factors such as moisture and temperature variations, increasing the product's lifespan and reliability.
The RF MMCX CONNECTOR type offers compatibility with a wide range of devices and applications, providing customers with flexibility in their connectivity options.
The BOARD mounting type allows for easy integration of the connectors onto circuit boards, enabling smooth and efficient communication between different electronic components and systems.
With a characteristic impedance of 50 ohm, the connectors ensure optimal signal transmission, minimizing signal loss, distortion, and interference for high-quality and reliable RF connections.
SOLDER termination type guarantees a secure and stable connection between the connectors and other components, reducing the risk of signal disruptions or disconnections, ensuring uninterrupted performance.
FEMALE contact gender simplifies identification and matching of the connectors, facilitating accurate and hassle-free connections, preventing potential compatibility issues.
JACK body or shell style combined with STRAIGHT mounting style allows for compact and space-saving installations, ideal for situations where space is limited, contributing to efficient and organized system layouts.
MCX & MMCX Connectors 73415-1472 attributes and parameters. Explore more MCX & MMCX Connectors devices from Molex
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Material:
MIL Conformity:
Manufacturer Series:
Mounting Style:
Mounting Type:
Option:
Panel Mount:
Termination Type:
73415-1472 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
MMBT2907ALT1G
Rochester Electronics
PNP; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 200 MHz; Maximum Collector Current (IC): .6 A; Terminal Form: GULL WING;
2N7002
Lite-on Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Qualification: Not Qualified; Additional Features: LOW THRESHOLD; Minimum DS Breakdown Voltage: 60 V;
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Secos
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Surge Components
Infinex
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Sangdest Microelectronics (Nanjing)
Microsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 30; No. of Elements: 1;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
SMBJ18CA
Bytesonic Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
LM555CM
Intersil
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
ULN2803ADWRG4
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
R113426000
Radiall S A
R113426000 by Radiall S A is a RF MCX connector with 50 ohm impedance, gold termination, and snap coupling. Ideal for applications up to 6 GHz frequency, it features a VSWR of 1.12 and PTFE insulator for reliable performance in board and panel mounting setups.
919-389P-51A
Amphenol
RF MCX CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
252151
Amphenol 252151 RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max operating frequency. Ideal for board mounting in applications requiring high-frequency signal transmission with low loss and high-quality gold termination contacts.
919-382J-51P
RF178-02SP1-404040-0255
Samtec
Samtec's RF178-02SP1-404040-0255 is a 50 ohm RF MCX connector with PTFE insulator, suitable for applications requiring high insulation resistance up to 5G ohm. With a max operating frequency of 6 GHz and temperature range from -50 to 165 °C, it is ideal for cable assemblies in various industries.
135-3701-201
Vertiv
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; DIN Conformance: NO;
MMCX7-J-P-HF-RA-TH1
Samtec's MMCX7-J-P-HF-RA-TH1 is a RF MMCX connector with 50 ohm impedance, suitable for commercial applications. Featuring a dielectric voltage of 700VAC, it operates b/w -65 to 125°C temperatures and offers high insulation resistance of 600MΩ. With a max frequency of 6 GHz, this right-angle jack connector has a brass shell and PTFE insulator for reliable solder termination on boards.
1060995-1
Tyco Electronics Amp
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Contact Finish: GOLD OVER NICKEL; JESD-609 Code: e4; Insulator Material: POLYTETRAFLUOROETHYLENE;
262107
Amphenol 262107 is an RF MMCX connector with gold termination, ideal for board mounting. Featuring a female contact gender and PTFE insulator material, it offers reliable connectivity in various applications like telecommunications and networking equipment.
73415-1251
Molex
Molex 73415-1251 RF MMCX Connector features 0.173" body diameter, 1000000000 ohm insulation resistance, and 0.2 dB insertion loss. Ideal for applications requiring a durable connector with characteristic impedance of 50 ohm, such as RG-316 cable types in high-frequency environments up to 6 GHz.
R113.182.000W
R113.182.000W by Radiall S A is a RF MCX connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.1 VSWR. It is used in applications requiring high durability, such as commercial-grade systems operating up to 6 GHz frequency range with RG-188 cables for reliable signal transmission.
MCX-J-C-H-ST-CA1
Samtec's MCX-J-C-H-ST-CA1 RF connector has a 50 ohm impedance, 6 GHz frequency, and 1400VAC dielectric voltage. Ideal for commercial applications, it features gold contact finish, PTFE insulator, and RG-174 cable compatibility. With a temperature range of -65 to 125 °C, this jack-style connector is reliable for various RF connections.
919-109J-51PX
Amphenol 919-109J-51PX is an RF MCX connector with 0.177" body diameter, 50 ohm impedance, and 6 GHz max frequency. Ideal for commercial applications, it offers low insertion loss of 0.1 dB, high durability with 500 cycles, and a dielectric voltage rating of 1400VAC.
MCX7-J-P-H-ST-SM1
Samtec's MCX7-J-P-H-ST-SM1 RF MCX connector has a dielectric voltage of 500VAC, impedance of 75 ohm, and operates up to 6 GHz. With a SNAP coupling type, it is ideal for board mounting in commercial applications requiring high-frequency signal transmission.
252129
Amphenol 252129 RF MCX Connector features 0.1 dB insertion loss, 1.5 VSWR, and 50 ohm impedance. Ideal for board mounting applications up to 6 GHz frequency range with right angle mounting style.
TE Connectivity
TE Connectivity's 1060995-1 RF MCX Connector features 0.177" body diameter, 0.1 dB insertion loss, and 50 ohm characteristic impedance. Ideal for commercial applications with a frequency range up to 6 GHz, this female jack connector is designed for board mounting with TFE insulator material and gold shell finish.
133-8433-101
RF MCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1400VAC; Contact Style: COAX;
MMCX-J-P-H-ST-SM1
Samtec's MMCX-J-P-H-ST-SM1 is a RF MMCX connector with 50 ohm impedance, 6 GHz frequency, and 1.3 VSWR. It features gold contact finish, PTFE insulator material, and brass shell for surface mount applications in commercial settings.
252107-75
Amphenol 252107-75 is an RF MCX connector with gold termination, beryllium copper contact material, and PTFE insulator. It is used in commercial applications requiring reliable coax connections for male plugs on panels with straight mounting and locking options.
919-130P-51SX
Amphenol's 919-130P-51SX RF MCX Connector features 0.1 dB insertion loss, 50 ohm impedance, and 6 GHz max frequency. Ideal for RG-174 cables, it is a gold-plated male plug with snap coupling for commercial applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73415-1471
Molex 73415-1471 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 700VAC dielectric voltage. Ideal for board mounting in applications requiring high durability and operating frequency up to 6 GHz.
73415-2063
Molex 73415-2063 RF MMCX Connector features 50 ohm impedance, 0.2 dB insertion loss, and 1.2 VSWR. Ideal for commercial applications with a frequency range up to 6 GHz, offering durability of 500 cycles in board and panel mounting configurations.
73415-0961
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Panel Mount: NO; Mounting Type: BOARD; Termination Type: SURFACE MOUNT;
73415-1001
The Molex 73415-1001 RF MMCX Connector features a characteristic impedance of 50 ohm, insertion loss of 0.2 dB, and dielectric voltage withstand of 700VAC. Ideal for board mounting in applications requiring durability up to 500 cycles, with a max operating frequency of 6 GHz.
73415-0951
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Panel Mount: NO;
73415-1692
Molex 73415-1692 RF MCX Connector has a characteristic impedance of 50Ω, insulator material PTFE, and coupling type SNAP. Ideal for board mounting in applications requiring female contact gender, surface mount termination, and straight mounting style.
73415-2061
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Maximum Insertion Force (N): 15.1232; Coupling Type: SNAP;
73415-0963
Molex 73415-0963 RF MMCX Connector features SNAP coupling, PTFE insulator, and FEMALE contact gender. Ideal for BOARD mounting in RF applications requiring STRAIGHT JACK style connectors.
73415-1121
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: RIGHT ANGLE; Mounting Type: CABLE; Panel Mount: NO;
73415-0971
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Option-1: LOCKING;
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; Total No. of Contacts: 1; Body Diameter: .173 inch;
73415-1691
Molex 73415-1691 RF MCX Connector features 5000000000 ohm Insulation Resistance, 0.15 dB Insertion Loss, and 1400VAC Dielectric Withstanding Voltage. Ideal for commercial applications with a frequency up to 6 GHz, this female jack connector has a gold nickel finish and operates b/w -55°C to 155°C.
73415-0991
RF MMCX CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; DIN Conformance: NO; Filter Feature: NO; IEC Conformity: NO;
73415-1002
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 700VAC; Mounting Style: RIGHT ANGLE; Mating Contact Finish: NOT SPECIFIED;
73413-0050
Molex 73413-0050 is a RF MCX connector with SNAP coupling, POLYTETRAFLUOROETHYLENE insulator, and 50 ohm impedance. Ideal for board mounting applications requiring FEMALE contact gender in JACK body style.
73415-3410
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Characteristic Impedance: 50 ohm; Contact Material: BERYLLIUM COPPER; Body or Shell Style: JACK; Mounting Type: CABLE;
73415-3210
RF MMCX CONNECTOR; Reliability: COMMERCIAL; Mounting Style: STRAIGHT; Mating Contact Finish: NOT SPECIFIED; Mounting Option-1: LOCKING; Total No. of Contacts: 1;
73415-4490
RF MCX CONNECTOR; Contact Gender: MALE; Mating Contact Finish: NOT SPECIFIED; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Cable Types: RG-179;
73415-1690
The Molex 73415-1690 is a RF MCX connector with a snap coupling type and a 50 ohm characteristic impedance. It is designed for surface mount termination on boards, making it suitable for various applications in the MCX & MMCX connectors category.
73415-1252
RF MMCX CONNECTOR; Termination Contact Finish: NOT APPLICABLE; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved