Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 67643-2911 is a USB connector with 4 contacts, rated at 1.5A signal current. It features a dielectric voltage of 750VAC and insulation resistance of 1000000000 ohm. Ideal for telecom/datacom applications, this right-angle receptacle has solderable retention clips and operates b/w -40 to 85°C.
Median Price
$1.427
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Avnet
1+ parts
$1.129
100+ parts
-
1k+ parts
10k+ parts
$0.861
Interstate Connecting
$1.247
$1.015
$0.987
Heilind Electronics
$1.342
$1.077
$1.061
Farnell
$1.450
$0.925
$0.800
Mouser Electronics
$1.850
$1.340
$1.120
$1.060
Newark
$1.950
$1.460
$1.320
DigiKey
$2.140
$1.187
Element14
$2.790
$2.020
$1.640
Chip1Stop
$1.040
$0.986
Powell Electronics
$1.080
$1.000
Verical
$1.414
TTI
Distrelec
Master Electronics
$1.440
$1.190
$1.090
DF Sales Co.
$1.063
Nova Conductors
$1.240
Digiode
$1.275
Chip Stock
VNN
Vyrian
NAC Semi
$2.320
IBS Electronics
$1.206
$1.164
$0.954
Prism Electronics
J2 Sourcing AB
Semi Source
Semicontronic
$0.880
$0.858
$0.854
Andel Nordic
$1.076
Corphita
$1.208
Continental Prestige Electronics
$1.215
Argo Parts USA
Aztec Data Supply Inc.
$2.747
Perfect Parts
Kepictronics
Authorized Procurement Solutions
Abacus Technologies
GreenTree Electronics
$1.197
Assy Fe
Cyclops Electronics Ltd (Excess)
Futuretech Components
Eastek
Optimal size allows for easy installation in tight spaces.
High insulation resistance ensures reliable performance and prevents electrical leakage.
High dielectric voltage capacity ensures safety and prevents electrical breakdown.
Durable insulator material provides good mechanical strength and thermal resistance.
Universal Serial Bus (USB) connector allows for versatile connectivity with various devices.
Copper alloy shell material provides good conductivity and durability.
Low contact resistance ensures efficient signal transmission and reduces power loss.
Right angle mounting style allows for easy and secure installation on circuit boards.
Commercial grade reliability ensures consistent performance in various applications and environments.
Telecom & Datacom Connectors 67643-2911 attributes and parameters. Explore more Telecom & Datacom Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Empty Shell:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Color:
Insulator Material:
MIL Conformity:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Ports:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
67643-2911 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.30
SB
PCN Design/Specification - 67643 Series Shell Plating 30/May/2014 Mult Devs Plating Change 30/Aug/2023
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
CDSOT23-SM712
Bourns
Bourns CDSOT23-SM712 is a bidirectional Transient Voltage Suppressor diode with 400W peak power dissipation and 20uA reverse current. Ideal for surge protection in applications requiring a max clamping voltage of 14V, such as IEC-61000-4-2 compliant systems. Operates b/w -55°C to 150°C with matte tin finish and Gull Wing terminals.
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
BAV99
Zetex Plc
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
Comchip Technology
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ERJU06F10R0V
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
LL4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Plessey Semiconductors Discrete Components Div
M24308/2-1F
Positronic Industries
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Additional Features: STANDARD: MIL-DTL-24308, POLARIZED; Body or Shell Style: RECEPTACLE;
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
ULN2803A
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
72309-8034BLF
Amphenol Communications Solutions
The Amphenol Communications Solutions 72309-8034BLF is a USB connector with matte tin over nickel finish. It features a dielectric voltage of 750VAC, insulation resistance of 1Gohm, and operates b/w -55 to 85°C. Ideal for telecom & datacom applications, it offers durability up to 1500 cycles and complies with UL standards.
0826-1X1T-GH-F
Bel Fuse
Bel Fuse 0826-1X1T-GH-F is a telecom & datacom connector with body dimensions of 0.752" x 0.591" x 1.29". It features POLYETHYLENE POLYAMIDE insulator, TIN finish, and NICKEL shell. Suitable for board and panel mounting, it has 8 contacts, UL 94V-0 flammability rating, and operates b/w -40°C to 85°C.
2108877-1
TE Connectivity
The TE Connectivity 2108877-1 USB Connector features gold termination with nickel barrier, polyethylene insulator material, and a max operating temperature of 85°C. Ideal for telecom & datacom applications, this connector has a total of 5 contacts, is rated at 1.8A for signal current, and offers durability up to 10000 cycles.
SS-7188S-A-NF-K1-50
Bel Fuse SS-7188S-A-NF-K1-50 is a 2-row, 8-contact telecom & datacom connector with POLYETHYLENE insulator. Featuring SPLIT BOARD LOCK mounting, it has 0.635" x 0.55" x 0.85" dimensions and NICKEL/TIN finish. Ideal for commercial applications requiring right-angle board mounting with 2.54mm terminal pitch.
1546413-3
TE Connectivity 1546413-3 is a Telecom & Datacom Connector with EMI shielding, ABS insulator, and 30u plating. It has 8 contacts, rated for 1.5A signal current, suitable for panel mounting in applications requiring reliable data transmission at temperatures ranging from -20 to 80°C.
921
Keystone Electronics
USB CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE; Minimum Operating Temperature: -25 Cel;
5520425-3
TE Connectivity 5520425-3 is a Telecom & Datacom Connector with 0.535" body length, 0.63" width, and 0.65" depth. It has an insulation resistance of 500MΩ and uses POLYBUTYLENE TEREPHTHALATE insulator material. This connector is ideal for telecom and datacom applications requiring a durable, straight-mounting female jack with solder termination.
6-569550-3
Commscope
The Commscope 6-569550-3 is a Telecom & Datacom Connector with GLASS FILLED POLYCARBONATE insulator and shell material. It features 8 contacts, IDC termination type, and UL Flammability Code 1863. Ideal for cable mounting applications requiring male plug connectors in telecom and datacom systems.
2169900003
Molex
TELECOM AND DATACOM CONNECTOR;
SS-6466-NF
Bel Fuse SS-6466-NF is a Telecom & Datacom Connector with 6 GOLD contacts, POLYETHYLENE insulator, and NICKEL/TIN shell finish. Ideal for board mounting applications in telecom and datacom systems due to its FEMALE contact gender, RIGHT ANGLE mounting style, and COPPER ALLOY shell material.
72309-8014BLF
AMPHENOL ICC
Amphenol Icc's 72309-8014BLF is a USB connector with a right angle mounting style. It has a body length of 0.516 inch, insulation resistance of 1G ohm, and dielectric withstand voltage of 750VAC. This connector is commonly used in telecom and datacom applications for board mounting with a hole size of 0.086-0.098 inch.
SS-641010-NF-K1
Bel Fuse SS-641010-NF-K1 is a 10-contact telecom & datacom connector with 0.605"x.505"x.815" dimensions, POLYETHYLENE insulator, and 30u NICKEL/TIN plating. It features FEMALE contacts, SOLDER termination, and UL 94V-0 flammability rating for board mounting applications in telecommunications and data communication systems.
09451151560
Harting Electronics & Kg
TELECOM AND DATACOM CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: NOT APPLICABLE;
931
USB CONNECTOR; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED;
91483-041
Fci
91483-041 by Fci is a Telecom & Datacom Connector with 0.3" body width and 1.291" depth. Featuring POLYAMIDE insulator, TIN shell finish, and 8 contacts for 3A signal current, it's ideal for telecom and datacom applications requiring crimp termination on cables.
2178126-2
TE Connectivity 2178126-2 is a Telecom & Datacom Connector with 0.761" body length, 0.547" width, and POLYETHYLENE insulator. It has 8 contacts for PCB mounting in right angle style. Ideal for telecommunications and data communication applications.
UX60SC-MB-5S8
Hirose Electric
The Hirose Electric UX60SC-MB-5S8 is a USB connector with 5 contacts, rated for 1A signal current. It features a dielectric voltage of 100VAC and insulation resistance of 100M ohm, suitable for telecom applications. With a durable design lasting up to 5000 cycles, it is ideal for board mounting in datacom systems.
MHRJJ66NFV
Mh Connectors
MHRJJ66NFV by Mh Connectors is a telecom and datacom connector with 6 contacts. It features a glass-filled polyester insulator material and has a UL flammability code of 94V-0. This jack-style connector is designed for board mounting and solder termination, making it suitable for various telecom and datacom applications.
AJP92A8813
Metz Connect Usa
AJP92A8813 by Metz Connect Usa is a Telecom & Datacom Connector with 8 contacts, POLYETHYLENE insulator, and UL 94V-0 flammability rating. It is a male plug connector for board mounting with solder termination, suitable for telecom and datacom applications.
95622-4881
Molex 95622-4881 is a telecom & datacom connector with 0.712" body length, 500M ohm insulation resistance, and 1000VAC dielectric voltage. Ideal for board mounting in telecom applications due to its glass-filled liquid crystal polymer insulator and brass contact material. Operating range from -40°C to 80°C ensures reliability in commercial settings.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
67643-0910
Molex 67643-0910 is a USB connector with gold finish, suitable for telecom/datacom applications. Features include 1.5A signal current, 750VAC dielectric voltage, and -40 to 85°C operating temperature range. Ideal for board mounting with solder termination and UL94V-0 flammability rating.
67643-3911
Molex 67643-3911 USB connector features 4 contacts, with matte tin finish and glass-filled polyamide insulation. With a dielectric voltage of 750VAC, it is ideal for telecom/datacom applications. The right-angle receptacle has a solder termination type and operates b/w -40 to 85°C.
67643-3910
USB CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE;
67643-2910
67643-0980
67643-1991
67643-3991
67643-1980
67643-1981
67643-1930
67643-2990
67643-2991
67643-2090
67643-2091
67643-3090
USB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 750VAC; Contact Style: USB 2.0 A; Insulation Resistance: 1000000000 ohm;
67643-0010
67643-1011
67643-2010
67643-2011
67643-0990
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved